About Durometer
Durometer is the international standard for measuring the hardness of rubber, plastic, and most nonmetallic materials.
More
About Track Rollers
Also known as cam followers, track rollers have a thick outer roller that runs directly on a flat surface.
More
Small-Diameter Corrosion-Resistant Conveyor Rollers
Made from stainless steel, these rollers are suitable for washdown applications.
Conveyor Rollers | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Roller | Replacement Bearings | |||||||||
| For Between Frame Wd. | Wd. | Gauge | Cap., lbs. | Overall Wd. | Bearing Material | Temp. Range, °F | Each | Each | ||
7/16" Hex Axle | ||||||||||
1 5/8" Dia. Stainless Steel Roller | ||||||||||
| 4" | 3 3/8" | 16 | 100 | 5 1/8" | Plastic | 30° to 150° | 0000000 | 000000 | 0000000 | 000000 |
| 6" | 5 3/8" | 16 | 100 | 7 1/8" | Plastic | 30° to 150° | 0000000 | 00000 | 0000000 | 00000 |
| 8" | 7 3/8" | 16 | 100 | 9 1/8" | Plastic | 30° to 150° | 0000000 | 00000 | 0000000 | 00000 |
| 10" | 9 3/8" | 16 | 100 | 11 1/8" | Plastic | 30° to 150° | 0000000 | 00000 | 0000000 | 00000 |
| 12" | 11 3/8" | 16 | 100 | 13 1/8" | Plastic | 30° to 150° | 0000000 | 00000 | 0000000 | 00000 |
| 14" | 13 3/8" | 16 | 100 | 15 1/8" | Plastic | 30° to 150° | 0000000 | 00000 | 0000000 | 00000 |
| 16" | 15 3/8" | 16 | 100 | 17 1/8" | Plastic | 30° to 150° | 0000000 | 00000 | 0000000 | 00000 |
| 18" | 17 3/8" | 16 | 100 | 19 1/8" | Plastic | 30° to 150° | 0000000 | 00000 | 0000000 | 00000 |
| 20" | 19 3/8" | 16 | 100 | 21 1/8" | Plastic | 30° to 150° | 0000000 | 00000 | 0000000 | 00000 |
| 22" | 21 3/8" | 16 | 100 | 23 1/8" | Plastic | 30° to 150° | 0000000 | 00000 | 0000000 | 00000 |
| 24" | 23 3/8" | 16 | 100 | 25 1/8" | Plastic | 30° to 150° | 0000000 | 00000 | 0000000 | 00000 |
| 26" | 25 3/8" | 16 | 100 | 27 1/8" | Plastic | 30° to 150° | 0000000 | 00000 | 0000000 | 00000 |
| 28" | 27 3/8" | 16 | 100 | 29 1/8" | Plastic | 30° to 150° | 0000000 | 00000 | 0000000 | 00000 |
| 30" | 29 3/8" | 16 | 100 | 31 1/8" | Plastic | 30° to 150° | 0000000 | 000000 | 0000000 | 00000 |
| 39" | 38 3/8" | 16 | 100 | 40 1/8" | Plastic | 30° to 150° | 0000000 | 000000 | 0000000 | 00000 |
Stainless Steel Roller Conveyors
Conveyors are made of corrosion-resistant stainless steel, making them suitable for washdown applications.
Note: Capacities are based on an evenly distributed load with at least one stand at each end for straight conveyors, and an additional stand in the center for curved conveyors. You can increase the capacity of a 10-ft. straight conveyor by adding a stand in the center. The length of the material you’re conveying should be at least three times the roller spacing.
Wd. | Roller | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| O'all | Between Frame | Lg., ft. | Spacing | Projection | Frame Ht. | Cap. (No. of Stands Required) | No. of Stands Included | Each | |
1 5/8" Dia. Stainless Steel Rollers—7/16" Hex Axle | |||||||||
| 12" | 10" | 5 | 3" | 5/16" | 2 1/2" | 235 lbs./ft. (2) | None | 0000000 | 0000000 |
| 12" | 10" | 10 | 3" | 5/16" | 2 1/2" | 235 lbs./ft. (3), 60 lbs./ft. (2) | None | 0000000 | 00000000 |
| 18" | 16" | 3 | 3" | 5/16" | 2 1/2" | 235 lbs./ft. (2) | None | 0000000 | 000000 |
| 18" | 16" | 5 | 3" | 5/16" | 2 1/2" | 235 lbs./ft. (2) | None | 0000000 | 000000 |
| 18" | 16" | 7 | 3" | 5/16" | 2 1/2" | 120 lbs./ft. (2) | None | 0000000 | 00000000 |
| 18" | 16" | 10 | 3" | 5/16" | 2 1/2" | 235 lbs./ft. (3), 60 lbs./ft. (2) | None | 0000000 | 00000000 |
| 24" | 22" | 3 | 3" | 5/16" | 2 1/2" | 235 lbs./ft. (2) | None | 0000000 | 000000 |
| 24" | 22" | 5 | 3" | 5/16" | 2 1/2" | 235 lbs./ft. (2) | None | 0000000 | 00000000 |
| 24" | 22" | 7 | 3" | 5/16" | 2 1/2" | 120 lbs./ft. (2) | None | 0000000 | 00000000 |
| 24" | 22" | 10 | 3" | 5/16" | 2 1/2" | 235 lbs./ft. (3), 60 lbs./ft. (2) | None | 0000000 | 00000000 |
| 26" | 24" | 5 | 3" | 5/16" | 2 1/2" | 235 lbs./ft. (2) | None | 0000000 | 00000000 |
| 26" | 24" | 10 | 3" | 5/16" | 2 1/2" | 235 lbs./ft. (3), 60 lbs./ft. (2) | None | 0000000 | 00000000 |
| 30" | 28" | 5 | 3" | 5/16" | 2 1/2" | 235 lbs./ft. (2) | None | 0000000 | 00000000 |
| 30" | 28" | 10 | 3" | 5/16" | 2 1/2" | 235 lbs./ft. (3), 60 lbs./ft. (2) | None | 0000000 | 00000000 |
| Replacement Bearing | 0000000 | Each | 000000 |
Wd. | ||||||||
|---|---|---|---|---|---|---|---|---|
| O'all | Between Frame | Radius | Roller Projection | Frame Ht. | Cap. (No. of Stands Required) | No. of Stands Included | Each | |
1 5/8" Dia. Stainless Steel Rollers—7/16" Hex Axle | ||||||||
| 12" | 10" | 36" | 5/16" | 2 1/2" | 235 lbs./ft. (3) | None | 0000000 | 000000000 |
| 18" | 16" | 36" | 5/16" | 2 1/2" | 235 lbs./ft. (3) | None | 0000000 | 00000000 |
| 24" | 22" | 36" | 5/16" | 2 1/2" | 235 lbs./ft. (3) | None | 0000000 | 00000000 |
| 26" | 24" | 36" | 5/16" | 2 1/2" | 235 lbs./ft. (3) | None | 0000000 | 00000000 |
| 30" | 28" | 36" | 5/16" | 2 1/2" | 235 lbs./ft. (3) | None | 0000000 | 00000000 |
| Replacement Bearing | 0000000 | Each | 000000 |
Threaded Track Rollers
Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting.
Crowned rollers have a slight curve, which is invisible to the naked eye, to stay centered on surfaces that are not perfectly aligned and/or not perfectly flat.
Rollers with seal have end seals to protect rolling elements from dirt and contamination.
Roller | Stud | Thread | Shoulder | Radial Load Cap., lbs. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Each | |
Black-Oxide Steel Flat Rollers without Seal | ||||||||||||||
| 1 5/8" | 7/8" | 5/8" | 1 1/2" | 5/8"-18 | 3/4" | 1 3/32" | 1/32" | 2,300 | 5,600 | 4,800 | 250° | Needle Roller | 0000000 | 000000 |
| 1 5/8" | 7/8" | 7/8" | 1 1/2" | 7/8"-14 | 3/4" | 1 3/32" | 1/32" | 2,300 | 11,000 | 4,800 | 250° | Needle Roller | 0000000 | 00000 |
Black-Oxide Steel Flat Rollers with Seal | ||||||||||||||
| 1 5/8" | 7/8" | 5/8" | 1 1/2" | 5/8"-18 | 3/4" | 1 3/32" | 1/32" | 2,300 | 5,600 | 4,800 | 250° | Needle Roller | 0000000 | 00000 |
| 1 5/8" | 7/8" | 7/8" | 1 1/2" | 7/8"-14 | 3/4" | 1 3/32" | 1/32" | 2,300 | 11,000 | 4,800 | 250° | Needle Roller | 0000000 | 000000 |
Black-Oxide Steel Crowned Rollers with Seal | ||||||||||||||
| 1 5/8" | 7/8" | 5/8" | 1 1/2" | 5/8"-18 | 3/4" | 1 3/32" | 1/32" | 2,300 | 5,600 | 4,800 | 250° | Needle Roller | 0000000 | 00000 |
| 1 5/8" | 7/8" | 7/8" | 1 1/2" | 7/8"-14 | 3/4" | 1 3/32" | 1/32" | 2,300 | 11,000 | 4,800 | 250° | Needle Roller | 0000000 | 000000 |
High-Load Threaded Track Rollers
With a double row of cylindrical roller bearings, these rollers provide the highest combination of speed and dynamic radial load ratings of any threaded track roller we offer. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting. All rollers are permanently lubricated.
Crowned rollers have a slight curve, invisible to the naked eye, which helps them stay centered on surfaces that are slightly misaligned or not perfectly flat.
Rollers with seal have an end seal to protect the rolling elements from dirt and contamination.
Roller | Stud | Thread | Shoulder | Radial Load Cap., lbs. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Includes | Each | |
Black-Oxide Steel | |||||||||||||||
Flat Rollers without Seal | |||||||||||||||
| 1 5/8" | 7/8" | 7/8" | 1 1/2" | 7/8"-14 | 3/4" | 1 1/16" | 1/16" | 1,800 | 9,000 | 6,300 | 245° | Needle Roller | Mounting Hardware | 0000000 | 000000 |
Crowned Rollers with Seal | |||||||||||||||
| 1 5/8" | 7/8" | 7/8" | 1 1/2" | 7/8"-14 | 3/4" | 1 1/16" | 1/16" | 1,800 | 9,000 | 6,300 | 245° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
Maintenance-Free Threaded Track Rollers
Because they never need to be relubricated, these rollers are a good choice for hard-to-reach places. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting.
Crowned rollers have a slight curve, which is invisible to the naked eye, to stay centered on surfaces that are not perfectly aligned and/or not perfectly flat.
Roller | Stud | Thread | Shoulder | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Max. Speed, rpm | Dynamic Radial Load Cap., lbs. | Max. Temp., °F | Bearing Type | Includes | Each | |
Steel Flat Rollers without Seal | ||||||||||||||
| 1 5/8" | 7/8" | 5/8" | 1 1/2" | 5/8"-18 | 3/4" | 1 1/8" | 1/32" | 1,200 | 160 | 250° | Plain | Mounting Hardware | 0000000 | 000000 |
Steel Crowned Rollers without Seal | ||||||||||||||
| 1 5/8" | 7/8" | 5/8" | 1 1/2" | 5/8"-18 | 3/4" | 1 1/8" | 1/32" | 1,200 | 160 | 250° | Plain | Mounting Hardware | 00000000 | 00000 |
Threaded Track Rollers with Adjustable Shoulder
Also known as eccentric track rollers, the shoulder adjusts up or down to align to your track, enabling uniform alignment among rollers in a system. Secure the stud with a nut for through-hole mounting. All rollers have end seals to protect rolling elements from dirt and contamination.
Roller | Stud | Thread | Shoulder | Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Ht. Adjustment Capability | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Includes | Each | |
Steel Flat Rollers with Seal | ||||||||||||||||
| 1 5/8" | 7/8" | 5/8" | 3/4" | 5/8"-18 | 3/4" | 7/8" | 3/4" | 0.03" | 3,100 | 8,800 | 5,000 | 250° | Needle Roller | Mounting Hardware | 0000000 | 000000 |
Maintenance-Free Ultra-Corrosion-Resistant Threaded Track Rollers
With dry-running PTFE sleeve bearings, these rollers don’t require lubricant. They’re also fully submersible, nonsparking, and lightweight. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting. All rollers have end seals to protect rolling elements from dirt and contamination.
Roller | Stud | Thread | Shoulder | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Static Radial Load Cap., lbs. | Max. Temp., °F | Bearing Type | Includes | Each | |
Fiberglass-Reinforced Nylon Flat Rollers with Seal | |||||||||||||
| 1 5/8" | 7/8" | 5/8" | 1 1/2" | 5/8"-18 | 3/4" | 1 3/16" | 1/16" | 1,800 | 250° | Plain | Mounting Hardware | 0000000 | 000000 |
Corrosion-Resistant Threaded Track Rollers
Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting. All rollers have end seals to protect rolling elements from dirt and contamination.
440C stainless steel rollers offer better corrosion resistance than chrome-plated steel rollers.
Roller | Stud | Thread | Shoulder | Radial Load Cap., lbs. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Each | |
440C Stainless Steel Flat Rollers with Seal | ||||||||||||||
| 1 5/8" | 7/8" | 5/8" | 1 1/2" | 5/8"-18 | 3/4" | 57/64" | 1/32" | 2,300 | 4,400 | 4,000 | 250° | Needle Roller | 0000000 | 0000000 |
Shaft-Mount Track Rollers
Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end. Lubricate rollers through a hole and groove in the inner ring.
Crowned rollers have a slight curve, which is invisible to the naked eye, to stay centered on surfaces that are not perfectly aligned and/or not perfectly flat.
Rollers with seal have end seals to protect rolling elements from dirt and contamination.
Roller | Radial Load Cap., lbs. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Overall Wd. | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | ID | ID Tolerance | Each | |
Black-Oxide Steel Flat Rollers without Seal | ||||||||||||
| 1 5/8" | 7/8" | 7/16" | 15/16" | 2,300 | 11,000 | 4,800 | 220° | Needle Roller | 7/16" | -0.0004" to 0.0002" | 0000000 | 000000 |
Black-Oxide Steel Flat Rollers with Seal | ||||||||||||
| 1 5/8" | 7/8" | 7/16" | 15/16" | 2,300 | 11,000 | 4,800 | 220° | Needle Roller | 7/16" | -0.0004" to 0.0002" | 0000000 | 00000 |
Black-Oxide Steel Crowned Rollers with Seal | ||||||||||||
| 1 5/8" | 7/8" | 7/16" | 15/16" | 2,300 | 11,000 | 4,800 | 220° | Needle Roller | 7/16" | -0.0004" to 0.0002" | 0000000 | 00000 |
High-Load Shaft-Mount Track Rollers
With a double row of cylindrical roller bearings, these rollers provide the highest combination of speed and dynamic radial load ratings of any shaft-mount track roller we offer. Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end.
Rollers with seal are permanently lubricated and have end seals to retain lubricant and protect rolling elements from dirt and contamination.
Roller | Radial Load Cap., lbs. | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Overall Wd. | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Each | |
Steel Flat Rollers with Seal | ||||||||||
| 1 5/8" | 7/8" | 7/16" | 15/16" | 6,200 | 7,000 | 6,200 | 250° | Cylindrical Roller | 0000000 | 000000 |
Drive Rollers
Made of neoprene rubber, these rollers resist oil, flames, gasoline, and weather. Also known as contact wheels and feed rollers, they have tapped hubs that allow you to mount them onto a shaft or stud to transmit power.
Roller | Hub | Set Screws | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Dia. | Wd. | Shaft Mount Type | No. Required | Included | Thread Size | Temperature Range, °F | Durometer (Hardness Rating) | Each | |
Neoprene Roller with Aluminum Hub | ||||||||||||
| 1 5/8" | 1/4" | 3/8" | 7/8" | 3/8" | Set Screw | 2 | No | 10-32 | -30° to 200° | 55A (Medium) Black | 00000000 | 000000 |
| 1 5/8" | 3/4" | 3/8" | 7/8" | 3/8" | Set Screw | 2 | No | 10-32 | -30° to 200° | 55A (Medium) Black | 00000000 | 00000 |
| 1 5/8" | 1" | 1/2" | 7/8" | 3/8" | Set Screw | 2 | No | 10-32 | -30° to 200° | 55A (Medium) Black | 00000000 | 00000 |
Tight-Tolerance Drive Rollers
The surface of these rollers is molded to a tolerance of either ±0.003 in. or ±0.08 mm to provide more consistent surface contact. Also known as contact wheels and feed rollers, they have tapped hubs that allow you to mount them onto a shaft or stud to transmit power. The urethane surface is nonmarring and wear resistant.
Slim-Tread Drive Rollers
A narrow O-ring tread provides both a sure grip and a delicate touch, making these rollers good for light duty tasks such as those involving paper and tape. Also known as contact wheels and feed rollers, they have tapped hubs that allow you to mount them onto a shaft or stud to transmit power. O-ring is Buna-N, which is nonmarring and resistant to oil and abrasion.
Roller | Hub | Set Screws | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Dia. | Wd. | Shaft Mount Type | No. Required | Included | Temperature Range, °F | Durometer (Hardness Rating) | Each | |
Buna-N Roller with Acetal Hub | |||||||||||
| 1 5/8" | 3/16" | 1/4" | 3/4" | 1/2" | Set Screw | 1 | Yes | -30° to 250° | 70A (Hard) Black | 0000000 | 000000 |
Abrasion-Resistant Low-Profile Drive Rollers
The mounting holes on these rollers are tapped directly through the roller’s surface so you can install them with set screws and still fit them into tight spots. Also known as contact wheels and feed rollers, drive rollers spin in unison with a shaft or stud to transmit power. The urethane surface is nonmarring and wear resistant.
For technical drawings and 3-D models, click on a part number.
Combination Sheet Metal Shears, Benders, and Curvers
Save space in your shop by cutting, bending, and curving sheet metal with a single machine. Also known as shear brake rolls. Use the blade on the shear to make clean, straight cuts; it has two cutting edges for twice the life. A press brake makes bends up to 90°. Create curves and circles with the slip roll.
When using the shear or press brake, set the manual back gauge to precisely position the sheet metal for consistent cuts or bends.
Max. Bending | For Max. Thick. | Roller | Mounting Holes | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Angle | Aluminum | Brass | Copper | Stainless Steel | Steel | Min. Bending Radius | Cut Lg. | Ht. | Wd. | Dp. | Dia. | No. of | Blade Material | Mounting Fasteners Included | No. of | Dia. | Each | |
For Aluminum, Brass, Copper, Stainless Steel, Steel | |||||||||||||||||||
| 40" | 90° | 3/64" | 1/32" | 1/32" | 1/64" | 1/32" | 7/8" | 40" | 23" | 42 1/2" | 14 1/2" | 1 5/8" | 3 | Steel | No | 4 | 0.32" | 0000000 | 000000000 |