We will reply to your message within an hour.
Rollers have diameters between 2" and 4".
Reduce noise, absorb impact, and extend roller life.
Rollers support and help guide material into machinery.
Rollers on the front of these trucks let you tilt the truck forward to load large-diameter cylinders.
Made of neoprene rubber, these rollers resist oil, flames, gasoline, and weather.
These polyurethane rollers are nonmarring and wear resistant.
These rollers spin freely in one direction and lock to transmit power in the other. Made of neoprene rubber, they are oil, flame, gasoline, and weather resistant.
These urethane rollers are nonmarring and wear resistant.
The surface of these rollers is molded to a tolerance of either ±0.003 in. or ±0.08 mm to provide more consistent surface contact.
These urethane rollers are wear and chemical resistant. They’re also nonmarring.
Install these rollers without the need for set screws or keyways.
The mounting holes on these rollers are tapped directly through the roller’s surface so you can install them with set screws and still fit them into tight spots.
Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting.
With a double row of cylindrical roller bearings, these rollers provide the highest combination of speed and dynamic radial load ratings of any threaded track roller we offer.
Because they never need to be relubricated, these rollers are a good choice for hard-to-reach places.
The soft rubber or plastic surface on these rollers creates less noise than the metal surfaces found on other track rollers.
Also known as eccentric track rollers, the shoulder adjusts up or down to align to your track, enabling uniform alignment among rollers in a system.
These rollers are rated to handle radial and thrust (top and side) loads simultaneously.
Lubricated with graphite, these rollers can handle temperatures from -450° to 750° F—the widest temperature range of any track roller in our offering.
These threaded track rollers are made of materials that prevent corrosion in wet environments.
Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end.
With a double row of cylindrical roller bearings, these rollers provide the highest combination of speed and dynamic radial load ratings of any shaft-mount track roller we offer.
Made of 440C stainless steel, these shaft-mount track rollers resist corrosion in damp environments.
The outer ring is built to handle higher speeds than standard shaft-mount track rollers.
Thread the stud directly into a component or secure with a nut for through-hole mounting.
Shaft-mount track rollers have more mounting flexibility than threaded track rollers.
A dual-flange design provides guidance on both sides and helps these rollers stay on track.
Combine track, mounting brackets, and hangers to create a system for hanging doors.
Round track eliminates edges where dust and debris can accumulate.
Mount components to these load-rated bearings and track rollers to add linear motion along T-slotted rails.
Combine with a T-slotted rail to add linear motion to your assembly.
Also known as slip rolls, these curvers create bends, curves, and circles in sheet metal.