The surface of these rollers is molded to a tolerance of either ±0.003 in. or ±0.08 mm to provide more consistent surface contact.

These urethane rollers are nonmarring and wear resistant.

These urethane rollers are wear and chemical resistant. They’re also nonmarring.

These urethane rollers are nonmarring and wear resistant.

These urethane rollers are wear and chemical resistant. They’re also nonmarring.

The mounting holes on these rollers are tapped directly through the roller’s surface so you can install them with set screws and still fit them into tight spots.

Made of neoprene rubber, these rollers resist oil, flames, gasoline, and weather.

A slippery UHMW polyethylene surface means these rollers won't stick to adjacent parts. Rollers are also highly corrosion resistant.

Made of neoprene rubber, these rollers resist oil, flames, gasoline, and weather.

Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting.

Because they never need to be relubricated, these rollers are a good choice for hard-to-reach places.

Also known as eccentric track rollers, the shoulder adjusts up or down to align to your track, enabling uniform alignment among rollers in a system.

Lubricated with graphite, these rollers can handle temperatures from -450° to 750° F—the widest temperature range of any track roller in our offering.

With dry-running PTFE sleeve bearings, these rollers don’t require lubricant. They’re also fully submersible, nonsparking, and lightweight.

Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end.

Made of 440C stainless steel, these shaft-mount track rollers resist corrosion in damp environments.

Thread the stud directly into a component or secure with a nut for through-hole mounting.