About Durometer
Durometer is the international standard for measuring the hardness of rubber, plastic, and most nonmetallic materials.
More
About Track Rollers
Also known as cam followers, track rollers have a thick outer roller that runs directly on a flat surface.
More
Abrasion-Resistant Threaded Idler Rollers
These polyurethane rollers are nonmarring and wear resistant. Commonly found in conveyor systems and printing equipment, they spin freely on an included stud to position and guide work.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Lg. | Bearing Type | Lubrication | Lubricant | Temperature Range, °F | Includes | Choose a Durometer (Hardness Rating) | Each | |
Polyurethane Rubber Roller with Steel Stud | |||||||||||||
2" | 1 15/16" | 1/2" | 1 3/8" | 1/2"-13 | 1 1/8" | Ball | Lubricated | Tena-Film #2500-2-ST | -65° to 200° | Mounting Hardware | 000000 | 000000 | |
2 1/2" | 1 15/16" | 1/2" | 1 3/8" | 1/2"-13 | 1 1/8" | Ball | Lubricated | Tena-Film #2500-2-ST | -65° to 200° | Mounting Hardware | 000000 | 00000 | |
4" | 1 15/16" | 1/2" | 1 3/8" | 1/2"-13 | 1 1/8" | Ball | Lubricated | Tena-Film #2500-2-ST | -65° to 200° | Mounting Hardware | 0000000 | 00000 | |
6" | 1 15/16" | 1/2" | 1 3/8" | 1/2"-13 | 1 1/8" | Ball | Lubricated | Tena-Film #2500-2-ST | -65° to 200° | Mounting Hardware | 60A (Medium) Blue | 0000000 | 000000 |
Threaded Idler Rollers
Made of neoprene rubber, these rollers resist oil, flames, gasoline, and weather. Commonly found in conveyor systems and printing equipment, they spin freely on an included stud to position and guide work.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Lg. | Bearing Type | Lubrication | Lubricant | Temperature Range, °F | Includes | Choose a Durometer (Hardness Rating) | Each | |
Neoprene Roller with Steel Stud | |||||||||||||
2" | 1 15/16" | 1/2" | 1 3/8" | 1/2"-13 | 1 1/8" | Ball | Lubricated | Tena-Film #2500-2-ST | -40° to 200° | Mounting Hardware | 0000000 | 000000 | |
2 1/2" | 1 15/16" | 1/2" | 1 3/8" | 1/2"-13 | 1 1/8" | Ball | Lubricated | Tena-Film #2500-2-ST | -40° to 200° | Mounting Hardware | 0000000 | 00000 | |
4" | 1 15/16" | 1/2" | 1 3/8" | 1/2"-13 | 1 1/8" | Ball | Lubricated | Tena-Film #2500-2-ST | -40° to 200° | Mounting Hardware | 00000000 | 00000 |
Abrasion-Resistant One-Way-Locking Threaded Idler/Drive Rollers
These urethane rollers spin freely in one direction and lock to transmit power in the other. They are nonmarring and wear resistant. Idler direction is clockwise when facing the roller end.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Lg. | Bearing Type | Lubrication | Lubricant | Temperature Range, ° F | Durometer (Hardness Rating) | Each | |
Urethane Roller with Steel Stud | ||||||||||||
2" | 1 15/16" | 1/2" | 1 1/4" | 1/2"-13 | 3/4" | Needle Roller | Lubricated | Aeroshell #14 | -65° to 200° | 60A (Medium) Blue | 0000000 | 000000 |
4" | 1 15/16" | 1/2" | 1 1/4" | 1/2"-13 | 3/4" | Needle Roller | Lubricated | Aeroshell #14 | -65° to 200° | 60A (Medium) Blue | 0000000 | 00000 |
One-Way-Locking Threaded Idler/Drive Rollers
These rollers spin freely in one direction and lock to transmit power in the other. Made of neoprene rubber, they are oil, flame, gasoline, and weather resistant. Idler direction is clockwise when facing the roller end.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Lg. | Bearing Type | Lubrication | Lubricant | Temperature Range, °F | Durometer (Hardness Rating) | Each | |
Neoprene Roller with Steel Stud | ||||||||||||
2" | 1 15/16" | 1/2" | 1 1/4" | 1/2"-13 | 3/4" | Needle Roller | Lubricated | Aeroshell #14 | -40° to 200° | 60A (Medium) Black | 0000000 | 000000 |
4" | 1 15/16" | 1/2" | 1 1/4" | 1/2"-13 | 3/4" | Needle Roller | Lubricated | Aeroshell #14 | -40° to 200° | 60A (Medium) Black | 0000000 | 00000 |
Abrasion-Resistant Self-Cleaning Threaded Idler Rollers
These urethane rollers are nonmarring and wear resistant. Ridges on the surface push dirt and debris out of the way. Commonly found in conveyor systems and printing equipment, they spin freely on an included stud to position and guide work.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Lg. | Bearing Type | Lubrication | Lubricant | Temperature Range, ° F | Includes | Choose a Durometer (Hardness Rating) | Each | |
Urethane Roller with Steel Stud | |||||||||||||
2" | 1 15/16" | 1/2" | 1 3/8" | 1/2"-13 | 1 1/8" | Ball | Lubricated | Tena-Film #2500-2-ST | -65° to 200° | Mounting Hardware | 35A (Soft) Yellow | 0000000 | 000000 |
2 1/2" | 1 15/16" | 1/2" | 1 3/8" | 1/2"-13 | 1 1/8" | Ball | Lubricated | Tena-Film #2500-2-ST | -65° to 200° | Mounting Hardware | 000000 | 00000 | |
4" | 1 15/16" | 1/2" | 1 3/8" | 1/2"-13 | 1 1/8" | Ball | Lubricated | Tena-Film #2500-2-ST | -65° to 200° | Mounting Hardware | 000000 | 00000 |
Self-Cleaning Threaded Idler Rollers
Made of neoprene rubber, these rollers resist oil, flames, gasoline, and weather. Ridges on the surface push dirt and debris out of the way. Commonly found in conveyor systems and printing equipment, they spin freely on an included stud to position and guide work.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Lg. | Bearing Type | Lubrication | Lubricant | Temperature Range, °F | Includes | Choose a Durometer (Hardness Rating) | Each | |
Neoprene Roller with Steel Stud | |||||||||||||
2" | 1 15/16" | 1/2" | 1 3/8" | 1/2"-13 | 1 1/8" | Ball | Lubricated | Tena-Film #2500-2-ST | -40° to 200° | Mounting Hardware | 0000000 | 000000 | |
2 1/2" | 1 15/16" | 1/2" | 1 3/8" | 1/2"-13 | 1 1/8" | Ball | Lubricated | Tena-Film #2500-2-ST | -40° to 200° | Mounting Hardware | 35A (Soft) Black | 00000000 | 00000 |
4" | 1 15/16" | 1/2" | 1 3/8" | 1/2"-13 | 1 1/8" | Ball | Lubricated | Tena-Film #2500-2-ST | -40° to 200° | Mounting Hardware | 0000000 | 00000 |
Drive Rollers
Made of neoprene rubber, these rollers resist oil, flames, gasoline, and weather. Also known as contact wheels and feed rollers, they have tapped hubs that allow you to mount them onto a shaft or stud to transmit power.
For technical drawings and 3-D models, click on a part number.
Roller | Hub | Set Screws | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | For Shaft Dia. | Dia. | Wd. | Shaft Mount Type | No. Required | Included | Temperature Range, °F | Choose a Durometer (Hardness Rating) | Each | |
Neoprene Roller with Steel Hub | |||||||||||
2" | 1 15/16" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -40° to 200° | 0000000 | 000000 | |
2" | 1 15/16" | 1" | 1 3/8" | 1/2" | Set Screw | 2 | Yes | -40° to 200° | 0000000 | 00000 | |
2 1/2" | 1 15/16" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -40° to 200° | 0000000 | 00000 | |
2 1/2" | 1 15/16" | 1" | 1 3/8" | 1/2" | Set Screw | 2 | Yes | -40° to 200° | 0000000 | 00000 | |
4" | 1 15/16" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -40° to 200° | 0000000 | 00000 | |
4" | 1 15/16" | 1" | 1 3/8" | 1/2" | Set Screw | 2 | Yes | -40° to 200° | 0000000 | 00000 |
Abrasion-Resistant Drive Rollers
These urethane rollers are nonmarring and wear resistant. Also known as contact wheels and feed rollers, they have tapped hubs that allow you to mount them onto a shaft or stud to transmit power.
For technical drawings and 3-D models, click on a part number.
Roller | Hub | Set Screws | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | For Shaft Dia. | Dia. | Wd. | Shaft Mount Type | No. Required | Included | Temperature Range, ° F | Choose a Durometer (Hardness Rating) | Each | |
Urethane Roller with Steel Hub | |||||||||||
2" | 1 15/16" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 0000000 | 000000 | |
2" | 1 15/16" | 1" | 1 3/8" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 0000000 | 00000 | |
2 1/2" | 1 15/16" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 0000000 | 00000 | |
2 1/2" | 1 15/16" | 1" | 1 3/8" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 0000000 | 00000 | |
4" | 1 15/16" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 0000000 | 00000 | |
4" | 1 15/16" | 1" | 1 3/8" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 0000000 | 00000 | |
4" | 1 15/16" | 1 1/4" | 1 5/8" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 60A (Medium) Blue | 0000000 | 00000 |
Abrasion-Resistant Flex-Grip Drive Rollers
These urethane rollers are nonmarring and wear resistant. The sidewall holes and soft surface allow the roller to gently grab and maintain contact as it is compressed. Also known as contact wheels and feed rollers, these rollers have tapped hubs that allow you to mount them onto a shaft or stud to transmit power.
For technical drawings and 3-D models, click on a part number.
Roller | Hub | Set Screws | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | For Shaft Dia. | Dia. | Wd. | Shaft Mount Type | No. Required | Included | Temperature Range, ° F | Durometer (Hardness Rating) | Each | |
Flexible Urethane Roller with Steel Hub | |||||||||||
2 1/2" | 1 15/16" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 35A (Soft) Yellow | 0000000 | 000000 |
2 1/2" | 1 15/16" | 1" | 1 3/8" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 35A (Soft) Yellow | 0000000 | 00000 |
4" | 1 15/16" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 35A (Soft) Yellow | 0000000 | 00000 |
4" | 1 15/16" | 1" | 1 3/8" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 35A (Soft) Yellow | 0000000 | 00000 |
Flex-Grip Drive Rollers
These neoprene rollers are wear and chemical resistant. The teardrop-shaped sidewall holes and soft surface allow the roller to gently grab and maintain contact as it is compressed. Also known as contact wheels and feed rollers, these rollers have tapped hubs that allow you to mount them onto a shaft or stud to transmit power.
For technical drawings and 3-D models, click on a part number.
Roller | Hub | Set Screws | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | For Shaft Dia. | Dia. | Wd. | Shaft Mount Type | No. Required | Included | Temperature Range, ° F | Color | Each | |
20A Durometer (Soft) | |||||||||||
Neoprene Roller with Steel Hub | |||||||||||
4" | 1 15/16" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -40° to 200° | Black | 000000 | 000000 |
4" | 1 15/16" | 1" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -40° to 200° | Black | 000000 | 00000 |
35A Durometer (Soft) | |||||||||||
Neoprene Roller with Steel Hub | |||||||||||
4" | 1 15/16" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -40° to 200° | Black | 0000000 | 00000 |
4" | 1 15/16" | 1" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -40° to 200° | Black | 0000000 | 00000 |
Oil-Resistant Flex-Grip Drive Rollers
A good choice for oily environments, these Buna-N rollers are also abrasion resistant and nonmarring. The teardrop-shaped sidewall holes and soft surface allow the roller to gently grab and maintain contact as it is compressed. Also known as contact wheels and feed rollers, these rollers have tapped hubs that allow you to mount them onto a shaft or stud to transmit power.
For technical drawings and 3-D models, click on a part number.
Roller | Hub | Set Screws | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | For Shaft Dia. | Dia. | Wd. | Shaft Mount Type | No. Required | Included | Temperature Range, °F | Color | Each | |
20A Durometer (Soft) | |||||||||||
Buna-N Roller with Steel Hub | |||||||||||
4" | 1 15/16" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -60° to 175° | White | 000000 | 000000 |
4" | 1 15/16" | 1" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -60° to 175° | White | 000000 | 00000 |
35A Durometer (Soft) | |||||||||||
Buna-N Roller with Steel Hub | |||||||||||
4" | 1 15/16" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -60° to 175° | White | 0000000 | 00000 |
4" | 1 15/16" | 1" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -60° to 175° | White | 0000000 | 00000 |
Abrasion-Resistant Self-Cleaning Drive Rollers
These urethane rollers are nonmarring and wear resistant. Ridges on the surface push dirt and debris out of the way. Also known as contact wheels and feed rollers, these rollers have tapped hubs that allow you to mount them onto a shaft or stud to transmit power.
For technical drawings and 3-D models, click on a part number.
Roller | Hub | Set Screws | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | For Shaft Dia. | Dia. | Wd. | Shaft Mount Type | No. Required | Included | Temperature Range, °F | Durometer (Hardness Rating) | Each | |
Urethane Roller with Steel Hub | |||||||||||
4" | 1 15/16" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 35A (Soft) Yellow | 0000000 | 000000 |
Self-Cleaning Drive Rollers
Made of neoprene rubber, these rollers resist oil, flames, gasoline, and weather. Ridges on the surface push dirt and debris out of the way. Also known as contact wheels and feed rollers, these rollers have tapped hubs that allow you to mount them onto a shaft or stud to transmit power.
For technical drawings and 3-D models, click on a part number.
Roller | Hub | Set Screws | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | For Shaft Dia. | Dia. | Wd. | Shaft Mount Type | No. Required | Included | Temperature Range, °F | Durometer (Hardness Rating) | Each | |
Neoprene Roller with Steel Hub | |||||||||||
4" | 1 15/16" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -40° to 200° | 35A (Soft) Black | 0000000 | 000000 |
Abrasion-Resistant Rollers
These urethane rollers are nonmarring and wear resistant. Mount them directly onto your shaft or build a custom roller by adding your own hub. Rollers with steel insert have a retaining ring groove for securing a ball bearing.
For technical drawings and 3-D models, click on a part number.
Rollers
Made of neoprene rubber, these rollers resist oil, flames, gasoline, and weather. Mount them directly onto your shaft or build a custom roller by adding your own hub.
For technical drawings and 3-D models, click on a part number.
Thrust-Load-Rated Threaded Track Rollers
These rollers are rated to handle radial and thrust (top and side) loads simultaneously. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting. All rollers are permanently lubricated and have end seals to retain lubricant and protect rolling elements from dirt and contamination.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Bearing Type | Includes | Each | |
Steel Flat Rollers with Seal | ||||||||||||||||
3" | 1 15/16" | 1 1/4" | 2 1/2" | 1 1/4"-12 | 1 3/4" | 1 3/4" | 1/16" | 1,100 | 12,000 | 6,000 | 12,000 | 225° | Tapered Roller | Mounting Hardware | 0000000 | 0000000 |
3 1/2" | 1 15/16" | 1 1/4" | 2 3/4" | 1 1/4"-12 | 1 3/4" | 1 3/4" | 1/16" | 1,100 | 12,000 | 6,000 | 12,000 | 225° | Tapered Roller | Mounting Hardware | 0000000 | 000000 |
4" | 1 15/16" | 1 1/4" | 2 3/4" | 1 1/4"-12 | 1 3/4" | 1 3/4" | 1/16" | 1,100 | 12,000 | 6,000 | 12,000 | 225° | Tapered Roller | Mounting Hardware | 0000000 | 000000 |
Threaded V-Groove Track Rollers
Thread the stud directly into a component or secure with a nut for through-hole mounting. Rollers are for use with Angle Rails for V-Groove Track Rollers. They handle radial and thrust (top and side) loads and work well in dirty environments because debris falls off the angled rail. Also known as cam followers, track rollers support loads while guiding and positioning work. All rollers are permanently lubricated.
Rollers with a seal block out dust and other contaminants better than shielded rollers, but they hold more heat. Their seal also helps retain lubricant.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | Groove | Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Wd. | Dp. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Bearing Type | Includes | Each | |
Steel V-Groove Rollers with Seal | ||||||||||||||||||
4 1/2" | 1 15/16" | 1 1/4" | 2 1/2" | 1 1/4"-12 | 1 3/4" | 1 3/4" | 1/16" | 1 1/2" | 3/4" | Not Rated | 20,000 | 6,000 | 12,000 | 225° | Tapered Roller | Mounting Hardware | 0000000 | 0000000 |
Flanged Threaded Track Rollers
Thread the stud directly into a component or secure with a nut for through-hole mounting. The flange provides guidance and helps the roller stay on track. All rollers are permanently lubricated and have end seals to retain lubricant and protect rolling elements from dirt and contamination.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | Flange | Static Load Cap., lbs. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | OD | Thick. | Max. Speed, rpm | Radial | Thrust | Max. Temp., °F | Includes | Each | |
Steel Flat Rollers with Seal | ||||||||||||||||
Tapered Roller Bearing | ||||||||||||||||
3" | 1 15/16" | 1 1/4" | 2 1/2" | 1 1/4"-12 | 1 3/4" | 1 3/4" | 1/16" | 3 15/16" | 19/32" | 1,100 | 9,800 | 12,000 | 225° | Mounting Hardware | 0000000 | 0000000 |
3 1/2" | 1 15/16" | 1 1/4" | 2 3/4" | 1 1/4"-12 | 1 3/4" | 1 3/4" | 1/16" | 4 7/16" | 19/32" | 1,100 | 9,800 | 12,000 | 225° | Mounting Hardware | 0000000 | 000000 |
Double-Flanged Track Rollers
A dual-flange design provides guidance on both sides and helps these rollers stay on track. They handle both radial and thrust (top and side) loads. All rollers are permanently lubricated and have end seals to retain lubricant and protect rolling elements from dirt and contamination.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | Flange | Groove | Static Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | OD | Thick. | Wd. | Dp. | Max. Speed, rpm | Radial | Thrust | Max. Temp., °F | Bearing Type | Each | |
Steel Flat Rollers with Seal | ||||||||||||||||||
3" | 1 15/16" | 1 1/4" | 2 1/2" | 1 1/4"-12 | 1 3/4" | 1 3/4" | 1/16" | 3 15/16" | 17/32" | 7/8" | 15/16" | 1,100 | 12,200 | 12,000 | 225° | Tapered Roller | 000000 | 0000000 |