About Track Rollers
Also known as cam followers, track rollers have a thick outer roller that runs directly on a flat surface.
More
Threaded Track Rollers
Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting.
Crowned rollers have a slight curve, which is invisible to the naked eye, to stay centered on surfaces that are not perfectly aligned and/or not perfectly flat.
Rollers with seal have end seals to protect rolling elements from dirt and contamination.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | Radial Load Cap., lbs. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Includes | Each | |
Black-Oxide Steel Flat Rollers without Seal | |||||||||||||||
| 3" | 1 3/4" | 1 1/4" | 2 1/2" | 1 1/4"-12 | 1 1/4" | 2 1/8" | 1/32" | 950 | 24,000 | 15,000 | 250° | Needle Roller | __ | 0000000 | 0000000 |
| 3 1/4" | 1 3/4" | 1 1/4" | 2 1/2" | 1 1/4"-12 | 1 1/4" | 2 1/8" | 1/32" | 850 | 24,000 | 15,000 | 250° | Needle Roller | __ | 0000000 | 000000 |
Black-Oxide Steel Flat Rollers with Seal | |||||||||||||||
| 3" | 1 3/4" | 1 1/4" | 2 1/2" | 1 1/4"-12 | 1 1/4" | 2 1/8" | 1/32" | 950 | 24,000 | 15,000 | 250° | Needle Roller | __ | 0000000 | 000000 |
| 3 1/4" | 1 3/4" | 1 1/4" | 2 1/2" | 1 1/4"-12 | 1 1/4" | 2 1/8" | 1/32" | 850 | 24,000 | 15,000 | 250° | Needle Roller | __ | 0000000 | 000000 |
Black-Oxide Steel Crowned Rollers with Seal | |||||||||||||||
| 3" | 1 3/4" | 1 1/4" | 2 1/2" | 1 1/4"-12 | 1 1/4" | 2 1/8" | 1/32" | 950 | 24,000 | 15,000 | 250° | Needle Roller | __ | 0000000 | 000000 |
| 3 1/4" | 1 3/4" | 1 1/4" | 2 1/2" | 1 1/4"-12 | 1 1/4" | 2 1/8" | 1/32" | 850 | 24,000 | 15,000 | 250° | Needle Roller | __ | 0000000 | 000000 |
Steel Flat Rollers with Seal | |||||||||||||||
| 3" | 1 3/4" | 1 1/4" | 2 1/2" | 1 1/4"-12 | 1 1/4" | 2" | 1/32" | 1,600 | 40,000 | 17,000 | 250° | Needle Roller | Mounting Hardware | 0000000 | 000000 |
Steel Crowned Rollers with Seal | |||||||||||||||
| 3" | 1 3/4" | 1 1/4" | 2 1/2" | 1 1/4"-12 | 1 1/4" | 2" | 1/32" | 1,600 | 40,000 | 17,000 | 250° | Needle Roller | Mounting Hardware | 0000000 | 000000 |
High-Load Threaded Track Rollers
With a double row of cylindrical roller bearings, these rollers provide the highest combination of speed and dynamic radial load ratings of any threaded track roller we offer. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting. All rollers are permanently lubricated.
Crowned rollers have a slight curve, invisible to the naked eye, which helps them stay centered on surfaces that are slightly misaligned or not perfectly flat.
Rollers with seal have an end seal to protect the rolling elements from dirt and contamination.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | Radial Load Cap., lbs. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Includes | Each | |
Black-Oxide Steel | |||||||||||||||
Flat Rollers without Seal | |||||||||||||||
| 3" | 1 3/4" | 1 1/2" | 2 1/2" | 1 1/2"-12 | 1 1/4" | 2 3/64" | 1/16" | 1,100 | 38,000 | 17,000 | 245° | Needle Roller | Mounting Hardware | 0000000 | 0000000 |
Flat Rollers with Seal | |||||||||||||||
| 3" | 1 3/4" | 1 1/2" | 2 1/2" | 1 1/2"-12 | 1 1/4" | 2 3/64" | 1/16" | 1,100 | 38,000 | 17,000 | 245° | Needle Roller | Mounting Hardware | 0000000 | 000000 |
| 3 1/4" | 1 3/4" | 1 1/2" | 2 1/2" | 1 1/2"-12 | 1 1/4" | 2 3/64" | 1/16" | 1,100 | 38,000 | 17,000 | 245° | Needle Roller | Mounting Hardware | 0000000 | 000000 |
Crowned Rollers with Seal | |||||||||||||||
| 3" | 1 3/4" | 1 1/2" | 2 1/2" | 1 1/2"-12 | 1 1/4" | 2 3/64" | 1/16" | 1,100 | 38,000 | 17,000 | 245° | Needle Roller | Mounting Hardware | 0000000 | 000000 |
Maintenance-Free Threaded Track Rollers
Because they never need to be relubricated, these rollers are a good choice for hard-to-reach places. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Max. Speed, rpm | Dynamic Radial Load Cap., lbs. | Max. Temp., °F | Bearing Type | Includes | Each | |
Steel Flat Rollers without Seal | ||||||||||||||
| 3" | 1 3/4" | 1 1/4" | 2 1/2" | 1 1/4"-12 | 1 1/4" | 2 1/8" | 1/32" | 1,200 | 600 | 250° | Plain | Mounting Hardware | 00000000 | 0000000 |
Extreme-Temperature Threaded Track Rollers
Lubricated with graphite, these rollers can handle temperatures from -450° to 750° F—the widest temperature range of any track roller in our offering. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting. All rollers have end seals to protect rolling elements from dirt and contamination.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Lg. | Max. Speed, rpm | Dynamic Radial Load Cap., lbs. | Temp. Range, °F | Bearing Type | Each | |
Steel Flat Rollers with Seal | |||||||||||
| 3" | 1 3/4" | 1 1/4" | 2 1/2" | 1 1/4"-12 | 1 1/4" | 100 | 200 | -450° to 750° | Plain | 0000000 | 0000000 |
Shaft-Mount Track Rollers
Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end. Lubricate rollers through a hole and groove in the inner ring.
Crowned rollers have a slight curve, which is invisible to the naked eye, to stay centered on surfaces that are not perfectly aligned and/or not perfectly flat.
Rollers with seal have end seals to protect rolling elements from dirt and contamination.
For technical drawings and 3-D models, click on a part number.
Roller | Radial Load Cap., lbs. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Overall Wd. | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | ID | ID Tolerance | Each | |
Black-Oxide Steel Flat Rollers without Seal | ||||||||||||
| 3" | 1 3/4" | 1" | 1 13/16" | 950 | 45,000 | 15,000 | 220° | Needle Roller | 1" | -0.0005" to 0.0001" | 0000000 | 0000000 |
| 3 1/4" | 1 3/4" | 1" | 1 13/16" | 850 | 45,000 | 15,000 | 220° | Needle Roller | 1" | -0.0005" to 0.0001" | 0000000 | 000000 |
Black-Oxide Steel Flat Rollers with Seal | ||||||||||||
| 3" | 1 3/4" | 1" | 1 13/16" | 950 | 45,000 | 15,000 | 220° | Needle Roller | 1" | -0.0005" to 0.0001" | 0000000 | 000000 |
| 3 1/4" | 1 3/4" | 1" | 1 13/16" | 850 | 45,000 | 15,000 | 220° | Needle Roller | 1" | -0.0005" to 0.0001" | 0000000 | 000000 |
Black-Oxide Steel Crowned Rollers with Seal | ||||||||||||
| 3" | 1 3/4" | 1" | 1 13/16" | 950 | 45,000 | 15,000 | 220° | Needle Roller | 1" | -0.0005" to 0.0001" | 0000000 | 000000 |
| 3 1/4" | 1 3/4" | 1" | 1 13/16" | 850 | 45,000 | 15,000 | 220° | Needle Roller | 1" | -0.0005" to 0.0001" | 0000000 | 000000 |
High-Load Shaft-Mount Track Rollers
With a double row of cylindrical roller bearings, these rollers provide the highest combination of speed and dynamic radial load ratings of any shaft-mount track roller we offer. Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end.
Rollers with seal are permanently lubricated and have end seals to retain lubricant and protect rolling elements from dirt and contamination.
For technical drawings and 3-D models, click on a part number.
Thrust-Load-Rated Shaft-Mount Track Rollers
These rollers are rated to handle radial and thrust (top and side) loads simultaneously. Also known as yoke-style cam followers, they have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end. All rollers are permanently lubricated and have end seals to retain lubricant and protect rolling elements from dirt and contamination.
For technical drawings and 3-D models, click on a part number.
Roller | Radial Load Cap., lbs. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Overall Wd. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Bearing Type | Each | |
Steel Flat Rollers with Seal | |||||||||||
| 3" | 1 3/4" | 1" | 1 13/16" | 1,100 | 20,000 | 6,000 | 12,000 | 225° | Tapered Roller | 0000000 | 0000000 |
Shaft-Mount V-Groove Track Rollers
Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end. Rollers are for use with Angle Rails for V-Groove Track Rollers. They handle radial and thrust (top and side) loads and work well in dirty environments because debris falls off the angled rail. All rollers are permanently lubricated.
Sealed rollers block out dust and other contaminants better than shielded rollers, but they hold more heat. Their seals also help retain lubricant.
For technical drawings and 3-D models, click on a part number.
Roller | Groove | Radial Load Cap., lbs. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Overall Wd. | Wd. | Dp. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Bearing Type | Each | |
Steel V-Groove Rollers with Seal | |||||||||||||
| 4 1/2" | 1 3/4" | 1" | 1 13/16" | 1 1/2" | 3/4" | 1,100 | 20,000 | 6,000 | 12,000 | 225° | Tapered Roller | 0000000 | 0000000 |
Flanged Shaft-Mount Track Rollers
Shaft-mount track rollers have more mounting flexibility than threaded track rollers. Because they’re flanged, they can handle both radial and thrust (top and side) loads. The flange also provides guidance and helps rollers stay on track. All are permanently lubricated and have end seals to retain lubricant and protect rolling elements from dirt and contamination.
For technical drawings and 3-D models, click on a part number.
Roller | Shoulder | Flange | Static Load Cap., lbs. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Overall Wd. | Dia. | Lg. | OD | Thick. | Max. Speed, rpm | Radial | Thrust | Max. Temp., °F | Bearing Type | Each | |
Steel Flat Rollers with Seal | ||||||||||||||
| 3" | 1 3/4" | 1" | 1 13/16" | 1 3/4" | 1/32" | 3 15/16" | 19/32" | 1,100 | 20,000 | 12,000 | 225° | Tapered Roller | 0000000 | 0000000 |
Track Rollers
Use these rollers as replacements on an existing door hanger or as the starting point for a customized hanger. Choose rollers that fit the inside width or diameter of your door track.
Rollers with ball bearings travel more smoothly and quietly than rollers with roller bearings.
Steel bearings are stronger and more durable than plastic bearings.
Rollers with a clevis-pin mount connect directly to mounting plates, doors, or curtains.
For technical drawings and 3-D models, click on a part number.
Roller | Bearing | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | For Inside Track Wd. | Dia. | Wd. | Material | Type | Material | Door Mounting Style | Pin Dia. | Each | |
| 300 | 1" | 2" | 1 3/4" | Zinc-Plated Steel | Ball | Steel | Clevis Pin | 5/16" | 0000000 | 000000 |