Current Current |
|---|
|
Flexibility Flexibility |
|---|
 |  |
| Rigid | Bend and Stay |
Cord Holding Type Cord Holding Type |
|---|
 |  |
| Screw-Down Clamp | Bushing |
 | |
| Locking Tab |
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
About Wire and Cable
More
Building Cable
- Use For:
NM-B, THHN: Buildings
UF-B, THHN: Buildings, Outdoors - Bend and Stay
- Temperature Range: 10° to 190° F
- Insulation: PVC Plastic
Rated for in-wall installation, this cable carries power to wall outlets. Also known as branch circuit wire, it can be used without conduit. It has solid THHN building wires, so the cable will stay in the shape you bend it. The uninsulated ground wire is not counted in the number of wires.
NM-B cable is for dry locations where moisture is not a concern, and often run through walls, ceilings, and concrete blocks.
Per Ft. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wire Ga. | No. of Wires | Cable AWG | Current | Wd. | Thick. | Outer Insulation Color | Inner Insulation Color | Features | Specifications Met | Length, ft. | 1-249 | 250-Up | |
NM-B, THHN Solid Wire | |||||||||||||
600V AC | |||||||||||||
| 14 | 2 | 14/2 | 15 A @ 86° F | 0.37" | 0.16" | White | Black, White | Uninsulated Ground Wire | UL Listed, UL 719 | 00000000 | 00000 | 00000 | |
| 14 | 3 | 14/3 | 15 A @ 86° F | 0.46" | 0.18" | White | Black, Red, White | Uninsulated Ground Wire | UL Listed, UL 719 | 00000000 | 000 | 000 | |
| 12 | 2 | 12/2 | 20 A @ 86° F | 0.42" | 0.18" | Yellow | Black, White | Uninsulated Ground Wire | UL Listed, UL 719 | 00000000 | 0000 | 000 | |
| 12 | 3 | 12/3 | 20 A @ 86° F | 0.52" | 0.19" | Yellow | Black, Red, White | Uninsulated Ground Wire | UL Listed, UL 719 | 00000000 | 0000 | 0000 | |
| 10 | 2 | 10/2 | 30 A @ 86° F | 0.49" | 0.21" | Orange | Black, White | Uninsulated Ground Wire | UL Listed, UL 719 | 00000000 | 0000 | 0000 | |
| 10 | 3 | 10/3 | 30 A @ 86° F | 0.63" | 0.22" | Orange | Black, Red, White | Uninsulated Ground Wire | UL Listed, UL 719 | 00000000 | 0000 | 0000 | |
Screw-Down Cord Grips for Building Cable
Tighten the screws to secure building cable for dry locations, also known as Romex type NM-B cable, to enclosures and outlet boxes.
For technical drawings and 3-D models, click on a part number.
For Trade Size | Each | |||||||
|---|---|---|---|---|---|---|---|---|
| Max. Hole Dia. | Conduit | Knockout | Material | Features | Specifications Met | 1-19 | 20-Up | |
| 0.66" | 3/8 | 1/2 | Zinc | Zinc Locknut | UL Listed | 0000000 | 00000 | 00000 |
| 0.86" | 3/4 | 3/4 | Zinc | Zinc Locknut | UL Listed | 0000000 | 0000 | 0000 |
| 1.08" | 1 | 1 | Zinc | Zinc Locknut | UL Listed | 0000000 | 0000 | 0000 |
| 1.41" | 1 1/4 | 1 1/4 | Zinc | Zinc Locknut | UL Listed | 0000000 | 0000 | 0000 |
| 1.65" | 1 1/2 | 1 1/2 | Zinc | Zinc Locknut | UL Listed | 0000000 | 0000 | 0000 |
| 2.09" | 2 | 2 | Zinc | Zinc Locknut | UL Listed | 0000000 | 0000 | 0000 |
Snap-In Cord Grips for Building Cable
Connect building cable for dry locations, also known as Romex type NM-B cable, to enclosures and outlet boxes by pushing these grips into a knockout.
For technical drawings and 3-D models, click on a part number.
For Trade Size | For Max. Cable | Each | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Conduit | Knockout | Dia. | Wd. | Thick. | Material | Cord Holding Type | Bushing Material | Specifications Met | 1-19 | 20-Up | |
| 3/8 | 1/2 | __ | 0.49" | 0.21" | Black PVC Plastic | Bushing | Plastic | UL Listed, C-UL Listed, CSA Certified | 0000000 | 00000 | 00000 |
| 3/4 | 3/4 | 0.65" | __ | __ | Black PVC Plastic | Bushing | Plastic | UL Listed, C-UL Listed, CSA Certified | 0000000 | 000 | 000 |
Locking Snap-In Cord Grips for Building Cable
An insert clamps the cable in place and provides more strain relief than standard snap-in cord grips for building cable. Use to connect building cable for dry locations, also known as Romex type NM-B cable, to enclosures and outlet boxes by pushing these grips into a knockout.
For technical drawings and 3-D models, click on a part number.
For Trade Size | For Max. Cable | Each | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Conduit | Knockout | Dia. | Wd. | Thick. | Material | Cord Holding Type | Specifications Met | 1-19 | 20-Up | |
| 1/2 | 1/2 | __ | 0.53" | 0.3" | Gray PVC Plastic | Locking Tab | UL Listed, C-UL Listed, CSA Certified | 0000000 | 00000 | 00000 |
| 1/2 | 1/2 | 0.66" | __ | __ | Gray PVC Plastic | Locking Tab | UL Listed, C-UL Listed, CSA Certified | 0000000 | 000 | 000 |
| 3/4 | 3/4 | 0.83" | __ | __ | Gray PVC Plastic | Locking Tab | UL Listed, C-UL Listed, CSA Certified | 0000000 | 0000 | 0000 |
| 1 | 1 | 1.13" | __ | __ | Gray PVC Plastic | Locking Tab | UL Listed, C-UL Listed, CSA Certified | 0000000 | 0000 | 0000 |
| 1 1/4 | 1 1/4 | 1.44" | __ | __ | Gray PVC Plastic | Locking Tab | UL Listed, C-UL Listed, CSA Certified | 0000000 | 0000 | 0000 |
Plastic Submersible Cord Grips for Building Cable
A rubber bushing with an oval slot resists water and provides entry for building cable, which is also known as Romex type NM-B or type UF-B cable. They are rated IP68 and IP69K for protection from prolonged submersion and high-pressure, high-temperature jets of water. Made of nylon, these cord grips keep electrical assemblies lightweight. They also withstand chemicals and corrosive environments.
For technical drawings and 3-D models, click on a part number.
For Cord | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Wd. | Thick. | For Knockout Trade Size | Material | Temp. Range, °F | Features | Environmental Rating | Specifications Met | Each | |
NPT Threads | |||||||||
| 0.45" | 0.2" | 1/2 | Black Nylon Plastic | -40° to 210° F | Rubber O-Ring, Nylon Plastic Locknut | IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12 | UL 746C f1, UL 94 V-0 | 0000000 | 00000 |
| 0.47" | 0.28" | 1/2 | Black Nylon Plastic | -40° to 210° F | Rubber O-Ring, Nylon Plastic Locknut | IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12 | UL 746C f1, UL 94 V-0 | 0000000 | 0000 |
| 0.55" | 0.24" | 1/2 | Black Nylon Plastic | -40° to 210° F | Rubber O-Ring, Nylon Plastic Locknut | IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12 | UL 746C f1, UL 94 V-0 | 0000000 | 0000 |
| 0.55" | 0.24" | 3/4 | Black Nylon Plastic | -40° to 210° F | Rubber O-Ring, Nylon Plastic Locknut | IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12 | UL 746C f1, UL 94 V-0 | 0000000 | 0000 |
| 0.55" | 0.28" | 3/4 | Black Nylon Plastic | -40° to 210° F | Rubber O-Ring, Nylon Plastic Locknut | IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12 | UL 746C f1, UL 94 V-0 | 0000000 | 0000 |
| 0.87" | 0.31" | 1 | Black Nylon Plastic | -40° to 210° F | Rubber O-Ring, Nylon Plastic Locknut | IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12 | UL 746C f1, UL 94 V-0 | 0000000 | 00000 |
PG Threads | |||||||||
| 0.45" | 0.2" | PG-16 | Black Nylon Plastic | -40° to 210° F | Rubber O-Ring, Nylon Plastic Locknut | IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12 | UL 746C f1, UL 94 V-0 | 0000000 | 0000 |
| 0.47" | 0.28" | PG-16 | Black Nylon Plastic | -40° to 210° F | Rubber O-Ring, Nylon Plastic Locknut | IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12 | UL 746C f1, UL 94 V-0 | 0000000 | 0000 |
| 0.55" | 0.24" | PG-16 | Black Nylon Plastic | -40° to 210° F | Rubber O-Ring, Nylon Plastic Locknut | IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12 | UL 746C f1, UL 94 V-0 | 0000000 | 0000 |
| 0.55" | 0.24" | PG-21 | Black Nylon Plastic | -40° to 210° F | Rubber O-Ring, Nylon Plastic Locknut | IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12 | UL 746C f1, UL 94 V-0 | 0000000 | 0000 |
| 0.55" | 0.28" | PG-21 | Black Nylon Plastic | -40° to 210° F | Rubber O-Ring, Nylon Plastic Locknut | IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12 | UL 746C f1, UL 94 V-0 | 0000000 | 0000 |
Metric Threads | |||||||||
| 0.45" | 0.2" | M20 | Black Nylon Plastic | -40° to 210° F | Rubber O-Ring, Nylon Plastic Locknut | IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12 | UL 746C f1, UL 94 V-0 | 0000000 | 0000 |
| 0.47" | 0.28" | M20 | Black Nylon Plastic | -40° to 210° F | Rubber O-Ring, Nylon Plastic Locknut | IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12 | UL 746C f1, UL 94 V-0 | 0000000 | 0000 |
| 0.55" | 0.24" | M20 | Black Nylon Plastic | -40° to 210° F | Rubber O-Ring, Nylon Plastic Locknut | IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12 | UL 746C f1, UL 94 V-0 | 0000000 | 0000 |
| 0.55" | 0.24" | M25 | Black Nylon Plastic | -40° to 210° F | Rubber O-Ring, Nylon Plastic Locknut | IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12 | UL 746C f1, UL 94 V-0 | 0000000 | 0000 |
| 0.55" | 0.28" | M25 | Black Nylon Plastic | -40° to 210° F | Rubber O-Ring, Nylon Plastic Locknut | IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12 | UL 746C f1, UL 94 V-0 | 0000000 | 0000 |
Aluminum Submersible Cord Grips for Building Cable
With an oval bushing hole, these lightweight grips secure flat building cable, such as Romex and Festoon cable, in wet areas. All offer strain relief to extend cable life. Made of aluminum, these grips are lighter in weight than steel and brass grips yet durable. They are NEMA and IP rated, so they’ll stand up to dust, oil, washdowns, and temporary submersion in water.
For technical drawings and 3-D models, click on a part number.
For Cord | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Width | Thickness | For Knockout Trade Size | Pipe Size | Thread Type | Temperature Range, °F | Features | Environmental Rating | Each | |
| 0.66" | 0.24" | 1 | 1 | NPT | -40° to 250° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 00000000 | 000000 |
| 0.75" | 0.25" | 1 | 1 | NPT | -40° to 250° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 00000000 | 00000 |
| 0.89" | 0.29" | 1 | 1 | NPT | -40° to 250° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 00000000 | 00000 |
| 1.13" | 0.22" | 1 1/4 | 1 1/4 | NPT | -40° to 250° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 00000000 | 00000 |
| 1.13" | 0.22" | 1 1/2 | 1 1/2 | NPT | -40° to 250° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 00000000 | 00000 |
| 1.15" | 0.48" | 1 1/2 | 1 1/2 | NPT | -40° to 250° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 00000000 | 00000 |
| 1.19" | 0.35" | 1 1/4 | 1 1/4 | NPT | -40° to 250° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 00000000 | 00000 |
| 1.19" | 0.35" | 1 1/2 | 1 1/2 | NPT | -40° to 250° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 00000000 | 00000 |
| 1.24" | 0.24" | 1 1/4 | 1 1/4 | NPT | -40° to 250° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 00000000 | 00000 |
| 1.24" | 0.24" | 1 1/2 | 1 1/2 | NPT | -40° to 250° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 00000000 | 00000 |
| 1.37" | 0.25" | 1 1/4 | 1 1/4 | NPT | -40° to 250° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 00000000 | 00000 |
| 1.37" | 0.25" | 1 1/2 | 1 1/2 | NPT | -40° to 250° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 00000000 | 00000 |
| 1.42" | 0.27" | 1 1/2 | 1 1/2 | NPT | -40° to 250° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 00000000 | 00000 |
| 1.46" | 0.45" | 2 | 2 | NPT | -40° to 250° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 00000000 | 00000 |
| 1.5" | 0.47" | 1 1/2 | 1 1/2 | NPT | -40° to 250° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 00000000 | 00000 |
| 1.5" | 0.47" | 2 | 2 | NPT | -40° to 250° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 00000000 | 00000 |
| 1.63" | 0.99" | 2 | 2 | NPT | -40° to 250° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 00000000 | 00000 |
| 1.65" | 0.22" | 2 | 2 | NPT | -40° to 250° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 00000000 | 00000 |
| 1.71" | 0.5" | 2 | 2 | NPT | -40° to 250° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 00000000 | 00000 |
| 1.75" | 0.63" | 2 | 2 | NPT | -40° to 250° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 00000000 | 00000 |
| 1.77" | 0.24" | 2 | 2 | NPT | -40° to 250° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 00000000 | 00000 |
| 2.18" | 0.3" | 2 1/2 | 2 1/2 | NPT | -40° to 250° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 00000000 | 000000 |
| 2.5" | 0.75" | 2 1/2 | 2 1/2 | NPT | -40° to 250° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 00000000 | 000000 |
Multi-Cord Grips for Building Cable
Secure multiple flat cable through one cord grip—reducing the space and number you need for a project, as well as saving time. With oval bushing holes, these cord grips protect Romex, festoon, and other commonly used flat building cable against harmful elements. They also relieve the strain on a cable when it's pulled, extending the life of the cable.
NEMA and IP rated, these cords withstand use under water and protect electronics inside enclosures from moisture, oil, and harsh chemicals. All bushing holes must be used in order to create a protective seal.
For technical drawings and 3-D models, click on a part number.
For Cord | ||||||||
|---|---|---|---|---|---|---|---|---|
| Width | Thickness | For Knockout Trade Size | Thread Type | Temperature Range, °F | Features | Environmental Rating | Each | |
Aluminum | ||||||||
For 2 Cords | ||||||||
| 0.705" | 0.25" | 1 1/2 | NPT | -40° to 300° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 0000000 | 000000 |
| 1.13" | 0.2" | 1 1/2 | NPT | -40° to 300° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 0000000 | 00000 |
| 1.13" | 0.22" | 1 1/4 | NPT | -40° to 300° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 0000000 | 00000 |
| 1.13" 0.66" | 0.22" 0.24" | 1 1/4 | NPT | -40° to 300° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 0000000 | 00000 |
| 1.13" 0.66" | 0.22" 0.24" | 1 1/2 | NPT | -40° to 300° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 0000000 | 00000 |
| 1.13" 0.75" | 0.22" 0.25" | 1 1/4 | NPT | -40° to 300° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 0000000 | 00000 |
| 1.13" 0.75" | 0.22" 0.25" | 1 1/2 | NPT | -40° to 300° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 0000000 | 00000 |
| 1.13" 0.89" | 0.22" 0.29" | 1 1/4 | NPT | -40° to 300° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 0000000 | 00000 |
| 1.13" 0.89" | 0.22" 0.29" | 1 1/2 | NPT | -40° to 300° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 0000000 | 00000 |
| 1.24" | 0.24" | 1 1/4 | NPT | -40° to 300° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 0000000 | 00000 |
| 1.24" | 0.24" | 1 1/2 | NPT | -40° to 300° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 0000000 | 00000 |
| 1.24" 0.66" | 0.22" 0.24" | 1 1/4 | NPT | -40° to 300° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 0000000 | 00000 |
| 1.24" 0.66" | 0.24" 0.24" | 1 1/2 | NPT | -40° to 300° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 0000000 | 00000 |
| 1.24" 0.75" | 0.22" 0.25" | 1 1/4 | NPT | -40° to 300° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 0000000 | 00000 |
| 1.24" 0.75" | 0.24" 0.25" | 1 1/2 | NPT | -40° to 300° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 0000000 | 00000 |
| 1.24" 0.89" | 0.24" 0.29" | 1 1/4 | NPT | -40° to 300° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 0000000 | 00000 |
| 1.24" 0.89" | 0.24" 0.29" | 1 1/2 | NPT | -40° to 300° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 0000000 | 00000 |
| 1.37" | 0.25" | 2 | NPT | -40° to 300° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 0000000 | 00000 |
| 1.5" 1.125" | 0.469" 0.265" | 2 | NPT | -40° to 300° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 0000000 | 00000 |
| 1.65" | 0.22" | 2 | NPT | -40° to 300° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 0000000 | 00000 |
| 1.75" 0.9" | 0.25" 0.25" | 2 | NPT | -40° to 300° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 0000000 | 00000 |
| 1.77" | 0.24" | 2 | NPT | -40° to 300° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEMA 6, NEMA 12, IP65, IP67 | 0000000 | 00000 |
Squeeze-and-Strip Flat Electrical Cable Strippers
One squeeze strips outer and inner insulation and pulls it off Romex and other types of flat cable. Feed cable through the front of the stripper—the blades automatically adjust to the cable size and strip insulation in the middle or at the end.
For Wire Gauge | ||||||||
|---|---|---|---|---|---|---|---|---|
| Solid | Stranded | For Wire/Cable Type | For Max. Cable Wd. | Lg. | Blade Material | Material | Each | |
| 18-10 | 18-10 | Power, Telephone | 15/32" | 5 1/4" | Steel | ABS Plastic | 0000000 | 000000 |
Electrical Wire Strippers
The plier nose on these wire strippers is useful for pulling and looping wire.
For Wire Gauge | ||||||
|---|---|---|---|---|---|---|
| Solid | For Cable Industry Designation | Lg. | Material | Grip Material | Each | |
With Bolt Cutter, Wire Cutter, Plier Nose | ||||||
| 14-12 | NM-B | 7 3/4" | Steel | PVC Plastic | 0000000 | 000000 |