This wire rope provides a good balance of abrasion resistance and flexibility.

Often used as bracing and guy wires, individual strands are thick solid wire for a stiff construction.

This stainless steel wire rope withstands outdoor and washdown applications. The construction of this wire rope provides a good balance of abrasion resistance and flexibility.

This stainless steel wire rope withstands outdoor and washdown applications. The construction of this wire rope provides a good balance of abrasion resistance and flexibility.

This wire rope provides a good balance of abrasion resistance and flexibility.

This stainless steel wire rope withstands outdoor and washdown applications. The construction of this wire rope provides a good balance of abrasion resistance and flexibility.

This braided wire has a stiff construction for use as bracing and guy wires.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

This wire rope provides a good balance of abrasion resistance and flexibility.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

More wires per strand than other wire rope gives this wire rope the flexibility required for repeat bending over drums and pulleys.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

These clamps have a forged fabrication and are reliable in critical applications. They are not for making slings. These must be oriented with the saddle on the long (live) end and U-bolt on the short (dead) end. They’re also known as wire rope clips.

Use in noncritical applications, such as fencing, where the strength of a forged clamp is not required. Install clamps so the saddle is on the long (live) end and the U-bolt is on the short (dead) end. They’re also known as wire rope clips.

Also known as heavy-pattern thimbles, these can be used to reinforce the loop of a sling.

These thimbles are also known as thin pattern thimbles.

Install these stud-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.

Install these eye-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.

Also known as socket-end swage fittings, install these eye-end fittings with a roller swage press for a strong, permanent hold.

Also known as socket-end swage fittings, install these clevis-end fittings with a roller swage press for a strong, permanent hold.

Add a clevis end to wire rope without having to fray the rope or use a compression tool.

Add an eye-end to wire rope without having to fray the rope or use a compression tool.

Compress the thin shank wall with a hand tool to attach these light duty stud-end fittings. They are also known as hand swage fittings.

A thimble on the inside of the loop protects the wire rope from fraying.

A large opening combined with an easy to open latch allows for quick and easy attachment to links and rings.

Secure a ball with shank to a flat surface.

For use in washdown environments, this wire rope has better corrosion resistance than the galvanized steel wire rope.

Screw the pin into position by hand for quick installation and removal. They're for use in low-vibration applications where the shackle remains stationary.

Screw the pin into position by hand for quick installation and removal. They're for use in low-vibration applications where the shackle remains stationary.

Attach a rope to the ring on the pin for remote release where access in limited. These shackes have a clevis end for making pivoting connections.

Disconnect by pulling the lever or attach rope to the eye on the lever for remote release.

A lip on the shackle keeps the screw from falling out when loosened.

Indentations in the shackle body hold the head of the pin in place once fastened.

For use in low-vibration applications where the shackle remains stationary.

These snaps have an eye that rotates for easy positioning.

Also known as quick links, these links thread closed by hand or with a wrench.

Flat sides allow webbing and strapping to lay flat, so they won't slide and bunch.

Best for attaching different widths of webbing and strapping, the flat sides ensure they lay flat and won't bunch or slide.

Also known as C-links, the notch in these links lets you slip additional links on or remove links quickly.

The flat side allows you to connect webbing and strapping, so they lay flat and resist bunching.

Use these links for general lifting applications.

To open, lift and twist the latch 90°.

A latch ensures rope, chain, and fittings won't separate from the hook when the load slackens.

Insert in eyes, links, rings, and other connectors with small openings. Also known as J-hooks.

The latch ensures rope, chain, and fittings won't separate from the hook when the load slackens.

Join, organize, and suspend objects with these S-hooks.

For extra security, these have a latch that snaps back into place to secure your load.

These hooks have closed ends on both sides.

Use these to adjust the position of a fitting or an object under load and minimize twisting and knotting.

Minimize twisting and knotting of rope and chain and adjust the position of a fitting or an object under load.

For easy positioning before a load is applied, these rotate to minimize twisting and knotting of rope and chain.

Attach these hooks to elastic cord to make a tie down.

Clamp around a pipe or tube to guide rope.

Also known as footman's loops, use these guides to prevent webbing from twisting, or as anchor points in tie-down applications.

The base of these hooks grip rope.

These slings are more abrasion and cut resistant than web and round slings, yet lighter in weight than mesh and chain slings.

Also known as sheaves, use these pulleys to assist with horizontal pulling or to guide a rope.

Also known as sheaves, use these pulleys to assist with horizontal pulling or to guide a rope.

Use the bore to mount these pulleys on a shaft. These pulleys are also known as sheaves.

These chain pulls are more durable than rope pulls to operate doors, vents, skylights, and overhead equipment.

A rolled rim provides added grip while the elongated neck and teeth on the washer, also known as a spur washer, add reinforcement and reduce rotation so you can use these grommets in thick materials such as canvas. Press the grommets into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material.