Material Material |
|---|
|
Release Type Release Type |
|---|
|
Door Mounting Location Door Mounting Location |
|---|
|
Push-to-Close Latch Type Push-to-Close Latch Type |
|---|
|
Capacity Capacity |
|---|
|
|
Draw Latch Type Draw Latch Type |
|---|
|
Finish Finish |
|---|
|
Mounting Orientation Mounting Orientation |
|---|
|
About Draw Latches
More
Self-Aligning Remote-Release Latches
Also known as rotary latches, these compensate for door misalignment when closing and then firmly grip the strike bolt for a secure hold. Operate the latches around corners and other obstructions—a flexible cable connects the latch and the handle. Maximum cumulative bend is the combination of individual bend angles the cable can withstand.
For T-handle release latches, pull on the handle to retract the spring-loaded latch.
For push-button release latches, push the button to retract the spring-loaded latch.
For technical drawings and 3-D models, click on a part number.
Handle | Handle Plate | Strike Bolt | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cable Dia. | Max. Latch. Distance | Wd. | Mount. Hole Dia. | Lg. | Wd. | Mount. Hole Ctr.-to-Ctr. | Dia. | Lg. | Proj. | Max. Cumulative Bend | Each | |
3-ft. Cable Lg. | ||||||||||||
Left-Side Door Mount | ||||||||||||
| 1/4" | 5/8" | 7/8" | 3/16" | 2 3/16" | 1 3/4" | 1", 1 9/16" | 1/2" | 1 1/2" | 1" | 720° | 0000000 | 000000 |
Right-Side Door Mount | ||||||||||||
| 1/4" | 5/8" | 7/8" | 3/16" | 2 3/16" | 1 3/4" | 1", 1 9/16" | 1/2" | 1 1/2" | 1" | 720° | 0000000 | 00000 |
5-ft. Cable Lg. | ||||||||||||
Left-Side Door Mount | ||||||||||||
| 1/4" | 5/8" | 7/8" | 3/16" | 2 3/16" | 1 3/4" | 1", 1 9/16" | 1/2" | 1 1/2" | 1" | 720° | 0000000 | 00000 |
Right-Side Door Mount | ||||||||||||
| 1/4" | 5/8" | 7/8" | 3/16" | 2 3/16" | 1 3/4" | 1", 1 9/16" | 1/2" | 1 1/2" | 1" | 720° | 0000000 | 00000 |
Strike Bolt | ||||||||
|---|---|---|---|---|---|---|---|---|
| Cable Dia. | Max. Latching Distance | Button Dia. | Dia. | Lg. | Proj. | Max. Cumulative Bend | Each | |
3-ft. Cable Lg. | ||||||||
Left-Side Door Mount | ||||||||
| 1/4" | 5/8" | 1 1/2" | 1/2" | 1 1/2" | 1" | 720° | 0000000 | 000000 |
Right-Side Door Mount | ||||||||
| 1/4" | 5/8" | 1 1/2" | 1/2" | 1 1/2" | 1" | 720° | 0000000 | 00000 |
5-ft. Cable Lg. | ||||||||
Left-Side Door Mount | ||||||||
| 1/4" | 5/8" | 1 1/2" | 1/2" | 1 1/2" | 1" | 720° | 0000000 | 00000 |
Right-Side Door Mount | ||||||||
| 1/4" | 5/8" | 1 1/2" | 1/2" | 1 1/2" | 1" | 720° | 0000000 | 00000 |
Hex-Socket Draw Latches
Use a 5/16" hex key to open and close these latches. A hole must be drilled in your panel for hex key access when mortise mounting. Capacity is the maximum amount of force the latch can withstand.
Style A has front tab mounting holes for mortise mounting.
Styles B and C have both side and back mounting holes, so they attach to the side of the panel or mortise into the panel.
For technical drawings and 3-D models, click on a part number.
Latch | Strike Plate | For Cutout | Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Material | Appearance | Capacity, lbs. | Ht. | Wd. | Dp. | Ht. | Wd. | Dp. | Ht. | Wd. | Dp. | Fasteners Included | Screw Size | Each | |
Mortise Mount | ||||||||||||||||
| A | Zinc-Plated Steel | Dull | 900 | 5 7/8" | 5/8" | 1 13/16" | 5 7/8" | 5/8" | 1 1/4" | 5 15/16" | 11/16" | 1 7/8" | No | No. 10 | 0000000 | 000000 |
Mortise or Surface Mount | ||||||||||||||||
| B | Zinc-Plated Steel | Dull | 1,400 | 3 3/8" | 5/8" | 1 3/4" | 3 3/8" | 5/8" | 1 1/4" | 3 7/16" | 11/16" | 1 13/16" | No | 1/4" | 0000000 | 0000 |
| C | Zinc-Plated Steel | Dull | 2,500 | 3 11/16" | 5/8" | 1 3/4" | 3 11/16" | 5/8" | 1 3/4" | 3 3/4" | 11/16" | 1 13/16" | No | 1/4" | 0000000 | 00000 |
Tight-Hold Turn-to-Open Draw Latches
With a spring-loaded handle, these hold tighter than other turn-to-open draw latches and compensate for slight misalignment. Lift and turn the handle 180° to open and close these latches. Capacity is the maximum amount of force the latch can withstand.
Mortise-mount latches are recessed to create a nearly flat surface that protects the latch from damage.
For technical drawings and 3-D models, click on a part number.
Overall | For Cutout | Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Appearance | Latching Distance | Lg. | Wd. | Projection | Capacity, lbs. | Ht. | Wd. | Dp. | Fasteners Included | Screw Size | Each | |
Surface Mount | |||||||||||||
| Zinc-Plated Steel | Dull | 3/4" | 2 3/8" | 1 15/16" | 5/8" | 300 | __ | __ | __ | No | No. 4 | 0000000 | 00000 |
| Zinc-Plated Steel | Dull | 3/4" | 2 3/4" | 2 1/2" | 13/16" | 400 | __ | __ | __ | No | No. 8 | 0000000 | 0000 |
| Zinc-Plated Steel | Dull | 1 7/8" | 4 15/16" | 3 1/4" | 13/16" | 500 | __ | __ | __ | No | No. 10 | 0000000 | 00000 |
| Black Powder-Coated Steel | Dull | 1 1/4" | 2 7/8" | 2 1/16" | 3/4" | 270 | __ | __ | __ | No | No. 8 | 0000000 | 00000 |
| 300 Series Stainless Steel | Dull | 3/4" | 2 3/8" | 1 15/16" | 5/8" | 300 | __ | __ | __ | No | No. 4 | 0000000 | 00000 |
| 300 Series Stainless Steel | Dull | 1 1/4" | 2 7/8" | 2 1/16" | 3/4" | 190 | __ | __ | __ | No | No. 8 | 0000000 | 00000 |
| 300 Series Stainless Steel | Dull | 1 7/8" | 4 15/16" | 3 1/4" | 13/16" | 500 | __ | __ | __ | No | No. 10 | 0000000 | 00000 |
Mortise Mount | |||||||||||||
| Zinc-Plated Steel | Dull | 1/2" | 4 1/8" | 4" | 1/16" | Not Rated | 3 1/8" | 3" | 9/16" | No | No. 10 | 00000000 | 00000 |
| Zinc-Plated Steel | Dull | 1 1/16" | 6 1/4" | 5" | 1/16" | Not Rated | 5" | 3 13/16" | 9/16" | No | No. 10 | 00000000 | 00000 |
Turn-to-Open Draw Latches
Lift and turn the handle 180° to open and close these latches. Capacity is the maximum amount of force the latch can withstand.
Zinc-plated steel latches are mildly corrosion resistant.
Black powder-coated steel latches blend into dark backgrounds and offer some corrosion resistance.
300 series stainless steel latches have good chemical resistance.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Appearance | Latching Distance | Lg. | Wd. | Projection | Capacity, lbs. | Fasteners Included | Screw Size | Each | |
Zinc-Plated Steel | |||||||||
| Dull | 1/4" | 2 5/16" | 1 1/2" | 5/8" | 300 | No | No. 4 | 0000000 | 00000 |
| Dull | 1/4" | 2 15/16" | 1 1/2" | 9/16" | 190 | No | No. 4 | 0000000 | 0000 |
| Dull | 3/8" | 4 9/16" | 2 3/4" | 11/16" | 500 | No | No. 10 | 0000000 | 0000 |
| Dull | 3/8" | 4 11/16" | 3 1/4" | 9/16" | 800 | No | No. 10 | 0000000 | 00000 |
| Dull | 3/8" | 4 3/4" | 2 3/4" | 13/16" | Not Rated | No | No. 10 | 0000000 | 00000 |
| Dull | 3/4" | 2 3/4" | 2 3/16" | 13/16" | 400 | No | No. 8 | 0000000 | 0000 |
Black Powder-Coated Steel | |||||||||
| Dull | 1/2" | 2 5/8" | 2 1/16" | 11/16" | 190 | No | No. 8 | 0000000 | 00000 |
300 Series Stainless Steel | |||||||||
| Dull | 1/4" | 2 5/16" | 1 1/2" | 5/8" | 300 | No | No. 4 | 0000000 | 00000 |
| Dull | 1/4" | 2 15/16" | 1 1/2" | 9/16" | 270 | No | No. 4 | 0000000 | 00000 |
| Dull | 3/8" | 4 9/16" | 2 3/4" | 11/16" | 500 | No | No. 10 | 0000000 | 00000 |
| Dull | 1/2" | 2 5/8" | 2 1/16" | 11/16" | 270 | No | No. 8 | 0000000 | 00000 |
Turn-to-Open Padlockable Draw Latches
Lift and turn the handle 180° to open and close these latches. Capacity is the maximum amount of force the latch can withstand.
Mortise-mount latch is recessed to create a nearly flat surface that protects the latch from damage. It also has a spring-loaded handle that provides a tight hold and compensates for slight misalignment.
For technical drawings and 3-D models, click on a part number.
Overall | For Cutout | Mounting | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Appearance | Latching Distance | Lg. | Wd. | Projection | Capacity, lbs. | For Max. Padlock Shackle Dia. | Ht. | Wd. | Dp. | Fasteners Included | Screw Size | Each | |
Surface Mount | ||||||||||||||
| Zinc-Plated Steel | Dull | 3/4" | 2 9/16" | 1 1/2" | 15/16" | 300 | 3/8" | __ | __ | __ | No | No. 4 | 0000000 | 00000 |
| 300 Series Stainless Steel | Dull | 3/4" | 2 9/16" | 1 1/2" | 15/16" | 300 | 3/8" | __ | __ | __ | No | No. 4 | 0000000 | 00000 |
Mortise Mount | ||||||||||||||
| Zinc-Plated Steel | Dull | 1 1/16" | 6 1/4" | 5" | 1/16" | Not Rated | 3/8" | 5 1/8" | 3 13/16" | 9/16" | No | No. 10 | 00000000 | 00000 |
Turn-to-Open Keyed Draw Locks
Lift and turn the handle 180° to open and close this lock. It has a spring-loaded handle that provides a tight hold and compensates for slight misalignment. It's keyed alike, choose it if you need several locks that open with the same key. Capacity is the maximum amount of force the latch can withstand.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Appearance | Latching Distance | Lg. | Wd. | Projection | Capacity, lbs. | Fasteners Included | Screw Size | Key Number | Number of Keys Included | Each | |
| Zinc-Plated Steel | Dull | 3/4" | 3 1/2" | 2 1/2" | 13/16" | 400 | No | No. 8 | 801 | 2 | 0000000 | 000000 |
Paddle-Handle Multipoint Latches
A paddle handle activates the top and bottom spring-loaded latching points to secure large cabinet doors. The handle does not latch. Mount this latch vertically or horizontally. It has two connecting rods that can be cut to fit 3-ft. to 8-ft. high doors.
For technical drawings and 3-D models, click on a part number.
Latch Bolt Housing | For Cutout | Latch Bolt | Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Door Thick. | Ht. | Wd. | Ht. | Wd. | Projection | Rear Projection | Projection | Material | Mounting Hole Ctr.-to-Ctr. | Fasteners Included | Screw Size | Includes | Each | |
Mortise Mount | ||||||||||||||
Zinc-Plated Steel with Black Painted Zinc Handle | ||||||||||||||
| 2" | 4 1/2" | 2 1/4" | 4" | 1 11/16" | 1 3/16" | 1 13/16" | 5/8" | Plastic | 1 1/4", 1 3/4" | No | 10-24 | Mounting Bracket, Two 1/4" Dia. × 48" Lg. Connecting Rods | 00000000 | 0000000 |
Paddle-Handle Multipoint Locks
Choose these locks if you need locks that each open with a different key. A paddle handle activates the top and bottom spring-loaded latching points to secure large cabinet doors. The handle does not latch. Mount this latch vertically or horizontally. It has two connecting rods that can be cut to fit 3-ft. to 8-ft. high doors.
For technical drawings and 3-D models, click on a part number.
Latch Bolt Housing | For Cutout | Latch Bolt | Mounting | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Door Thick. | Ht. | Wd. | Ht. | Wd. | Projection | Rear Projection | Projection | Material | Mounting Hole Ctr.-to-Ctr. | Fasteners Included | Screw Size | No. of Keys Included | Includes | Each | |
Mortise Mount | |||||||||||||||
Zinc-Plated Steel with Black Painted Zinc Handle | |||||||||||||||
| 2" | 4 1/2" | 2 1/4" | 4" | 1 11/16" | 1 3/16" | 1 13/16" | 5/8" | Plastic | 1 1/4", 1 3/4" | No | 10-24 | 2 | Mounting Bracket, Two 1/4" Dia. × 48" Lg. Connecting Rods | 00000000 | 0000000 |