Mounting Style Mounting Style |
|---|
 |  |
| Mortise | Surface |
 | |
| Through Hole |
Capacity Capacity |
|---|
|
|
Material Material |
|---|
|
Draw Latch Type Draw Latch Type |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
Combination Style Combination Style |
|---|
 |  |
| Rolling Digit | Dial |
Opens With Opens With |
|---|
|  |
| Combination | Key-Controlled Combination |
 | |
| Knob |
Latching Distance Latching Distance |
|---|
|
|
|
Release Type Release Type |
|---|
 |  |
| Push Button | T Handle |
Combination Type Combination Type |
|---|
|
About Draw Latches
More
About Padlocks
More
About Cam Latches and Locks
More
Hex-Socket Draw Latches
Use a 5/16" hex key to open and close these latches. A hole must be drilled in your panel for hex key access when mortise mounting. Capacity is the maximum amount of force the latch can withstand.
Style A has front tab mounting holes for mortise mounting.
Styles B and C have both side and back mounting holes, so they attach to the side of the panel or mortise into the panel.
For technical drawings and 3-D models, click on a part number.
Latch | Strike Plate | For Cutout | Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Material | Appearance | Capacity, lbs. | Ht. | Wd. | Dp. | Ht. | Wd. | Dp. | Ht. | Wd. | Dp. | Fasteners Included | Screw Size | Each | |
Mortise Mount | ||||||||||||||||
| A | Zinc-Plated Steel | Dull | 900 | 5 7/8" | 5/8" | 1 11/16" | 5 7/8" | 5/8" | 1 1/4" | 5 15/16" | 11/16" | 1 7/8" | No | No. 10 | 0000000 | 000000 |
Mortise or Surface Mount | ||||||||||||||||
| B | Zinc-Plated Steel | Dull | 1,400 | 3 3/8" | 5/8" | 1 3/4" | 3 3/8" | 5/8" | 1 1/4" | 3 7/16" | 11/16" | 1 13/16" | No | 1/4" | 0000000 | 00000 |
| C | Zinc-Plated Steel | Dull | 2,500 | 3 11/16" | 5/8" | 1 3/4" | 3 11/16" | 5/8" | 1 3/4" | 3 3/4" | 11/16" | 1 13/16" | No | 1/4" | 0000000 | 00000 |
Tight-Hold Turn-to-Open Draw Latches
With a spring-loaded handle, these hold tighter than other turn-to-open draw latches and compensate for slight misalignment. Lift and turn the handle 180° to open and close these latches. Capacity is the maximum amount of force the latch can withstand.
Mortise-mount latches are recessed to create a nearly flat surface that protects the latch from damage.
For technical drawings and 3-D models, click on a part number.
Overall | For Cutout | Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Appearance | Latching Distance | Lg. | Wd. | Projection | Capacity, lbs. | Ht. | Wd. | Dp. | Fasteners Included | Screw Size | Each | |
Surface Mount | |||||||||||||
| Zinc-Plated Steel | Dull | 3/4" | 2 3/8" | 1 15/16" | 5/8" | 300 | __ | __ | __ | No | No. 4 | 0000000 | 00000 |
| Zinc-Plated Steel | Dull | 3/4" | 2 3/4" | 2 1/2" | 13/16" | 400 | __ | __ | __ | No | No. 8 | 0000000 | 00000 |
| Zinc-Plated Steel | Dull | 1 7/8" | 4 15/16" | 3 1/4" | 13/16" | 500 | __ | __ | __ | No | No. 10 | 0000000 | 00000 |
| Black Powder-Coated Steel | Dull | 1 1/4" | 2 7/8" | 2 1/16" | 3/4" | 270 | __ | __ | __ | No | No. 8 | 0000000 | 00000 |
| 300 Series Stainless Steel | Dull | 3/4" | 2 3/8" | 1 15/16" | 5/8" | 300 | __ | __ | __ | No | No. 4 | 0000000 | 00000 |
| 300 Series Stainless Steel | Dull | 1 1/4" | 2 7/8" | 2 1/16" | 3/4" | 190 | __ | __ | __ | No | No. 8 | 0000000 | 00000 |
| 300 Series Stainless Steel | Dull | 1 7/8" | 4 15/16" | 3 1/4" | 13/16" | 500 | __ | __ | __ | No | No. 10 | 0000000 | 00000 |
Mortise Mount | |||||||||||||
| Zinc-Plated Steel | Dull | 1/2" | 4 1/8" | 4" | 1/16" | Not Rated | 3 1/8" | 3" | 9/16" | No | No. 10 | 00000000 | 00000 |
| Zinc-Plated Steel | Dull | 1 1/16" | 6 1/4" | 5" | 1/16" | Not Rated | 5" | 3 13/16" | 9/16" | No | No. 10 | 00000000 | 00000 |
Light Duty Turn-to-Open Draw Latches
Use this latch to draw lightweight surfaces together.
For technical drawings and 3-D models, click on a part number.
| Material | Appearance | Latching Distance | Dia. | Projection | Capacity | Mounting Fasteners Included | Each | |
| Zinc-Plated Steel | Dull | 15/16" | 1 7/8" | 5/8" | Not Rated | Yes | 0000000 | 00000 |
L-Handle Light Duty Turn-to-Open Draw Latches
Use this L-handle latch to draw lightweight surfaces together.
For technical drawings and 3-D models, click on a part number.
Overall | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Material | Appearance | Latching Distance | Lg. | Wd. | Projection | Capacity | Mounting Fasteners Included | Each | |
| Brass-Plated Steel | Dull | 3/16" | 2 5/8" | 2 5/16" | 7/8" | Not Rated | Yes | 0000000 | 00000 |
Turn-to-Open Draw Latches
Lift and turn the handle 180° to open and close these latches. Capacity is the maximum amount of force the latch can withstand.
Zinc-plated steel latches are mildly corrosion resistant.
Black powder-coated steel latches blend into dark backgrounds and offer some corrosion resistance.
300 series stainless steel latches have good chemical resistance.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Appearance | Latching Distance | Lg. | Wd. | Projection | Capacity, lbs. | Fasteners Included | Screw Size | Each | |
Zinc-Plated Steel | |||||||||
| Dull | 1/4" | 2 5/16" | 1 1/2" | 5/8" | 300 | No | No. 4 | 0000000 | 00000 |
| Dull | 1/4" | 2 15/16" | 1 1/2" | 9/16" | 190 | No | No. 4 | 0000000 | 00000 |
| Dull | 3/8" | 4 9/16" | 2 3/4" | 11/16" | 500 | No | No. 10 | 0000000 | 00000 |
| Dull | 3/8" | 4 11/16" | 3 1/4" | 9/16" | 800 | No | No. 10 | 0000000 | 00000 |
| Dull | 3/8" | 4 3/4" | 2 3/4" | 13/16" | Not Rated | No | No. 10 | 0000000 | 00000 |
| Dull | 3/4" | 2 3/4" | 2 3/16" | 13/16" | 400 | No | No. 8 | 0000000 | 00000 |
Black Powder-Coated Steel | |||||||||
| Dull | 1/2" | 2 5/8" | 2 1/16" | 11/16" | 190 | No | No. 8 | 0000000 | 00000 |
300 Series Stainless Steel | |||||||||
| Dull | 1/4" | 2 5/16" | 1 1/2" | 5/8" | 300 | No | No. 4 | 0000000 | 00000 |
| Dull | 1/4" | 2 15/16" | 1 1/2" | 9/16" | 270 | No | No. 4 | 0000000 | 00000 |
| Dull | 3/8" | 4 9/16" | 2 3/4" | 11/16" | 500 | No | No. 10 | 0000000 | 00000 |
| Dull | 1/2" | 2 5/8" | 2 1/16" | 11/16" | 270 | No | No. 8 | 0000000 | 00000 |
Turn-to-Open Padlockable Draw Latches
Lift and turn the handle 180° to open and close these latches. Capacity is the maximum amount of force the latch can withstand.
Mortise-mount latch is recessed to create a nearly flat surface that protects the latch from damage. It also has a spring-loaded handle that provides a tight hold and compensates for slight misalignment.
For technical drawings and 3-D models, click on a part number.
Overall | For Cutout | Mounting | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Appearance | Latching Distance | Lg. | Wd. | Projection | Capacity, lbs. | For Max. Padlock Shackle Dia. | Ht. | Wd. | Dp. | Fasteners Included | Screw Size | Each | |
Surface Mount | ||||||||||||||
| Zinc-Plated Steel | Dull | 3/4" | 2 9/16" | 1 1/2" | 15/16" | 300 | 3/8" | __ | __ | __ | No | No. 4 | 0000000 | 00000 |
| 300 Series Stainless Steel | Dull | 3/4" | 2 9/16" | 1 1/2" | 15/16" | 300 | 3/8" | __ | __ | __ | No | No. 4 | 0000000 | 00000 |
Mortise Mount | ||||||||||||||
| Zinc-Plated Steel | Dull | 1 1/16" | 6 1/4" | 5" | 1/16" | Not Rated | 3/8" | 5 1/8" | 3 13/16" | 9/16" | No | No. 10 | 00000000 | 00000 |
Turn-to-Open Keyed Draw Locks
Lift and turn the handle 180° to open and close this lock. It has a spring-loaded handle that provides a tight hold and compensates for slight misalignment. It's keyed alike, choose it if you need several locks that open with the same key. Capacity is the maximum amount of force the latch can withstand.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Appearance | Latching Distance | Lg. | Wd. | Projection | Capacity, lbs. | Fasteners Included | Screw Size | Key Number | Number of Keys Included | Each | |
| Zinc-Plated Steel | Dull | 3/4" | 3 1/2" | 2 1/2" | 13/16" | 400 | No | No. 8 | 801 | 2 | 0000000 | 000000 |
Self-Aligning Remote-Release Latches
Also known as rotary latches, these compensate for door misalignment when closing and then firmly grip the strike bolt for a secure hold. Operate the latches around corners and other obstructions—a flexible cable connects the latch and the handle. Maximum cumulative bend is the combination of individual bend angles the cable can withstand.
For T-handle release latches, pull on the handle to retract the spring-loaded latch.
For push-button release latches, push the button to retract the spring-loaded latch.
For technical drawings and 3-D models, click on a part number.
Handle | Handle Plate | Strike Bolt | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cable Dia. | Max. Latch. Distance | Wd. | Mount. Hole Dia. | Lg. | Wd. | Mount. Hole Ctr.-to-Ctr. | Dia. | Lg. | Proj. | Max. Cumulative Bend | Each | |
3-ft. Cable Lg. | ||||||||||||
Left-Side Door Mount | ||||||||||||
| 1/4" | 5/8" | 7/8" | 3/16" | 2 3/16" | 1 3/4" | 1", 1 9/16" | 3/8" | 1 1/2" | 1" | 720° | 0000000 | 000000 |
Right-Side Door Mount | ||||||||||||
| 1/4" | 5/8" | 7/8" | 3/16" | 2 3/16" | 1 3/4" | 1", 1 9/16" | 3/8" | 1 1/2" | 1" | 720° | 0000000 | 00000 |
5-ft. Cable Lg. | ||||||||||||
Left-Side Door Mount | ||||||||||||
| 1/4" | 5/8" | 7/8" | 3/16" | 2 3/16" | 1 3/4" | 1", 1 9/16" | 3/8" | 1 1/2" | 1" | 720° | 0000000 | 00000 |
Right-Side Door Mount | ||||||||||||
| 1/4" | 5/8" | 7/8" | 3/16" | 2 3/16" | 1 3/4" | 1", 1 9/16" | 3/8" | 1 1/2" | 1" | 720° | 0000000 | 00000 |
Paddle-Handle Multipoint Latches
A paddle handle activates the top and bottom spring-loaded latching points to secure large cabinet doors. The handle does not latch. Mount this latch vertically or horizontally. It has two connecting rods that can be cut to fit 3-ft. to 8-ft. high doors.
For technical drawings and 3-D models, click on a part number.
Latch Bolt Housing | For Cutout | Latch Bolt | Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Door Thick. | Ht. | Wd. | Ht. | Wd. | Projection | Rear Projection | Projection | Material | Mounting Hole Ctr.-to-Ctr. | Fasteners Included | Screw Size | Includes | Each | |
Mortise Mount | ||||||||||||||
Zinc-Plated Steel with Black Painted Zinc Handle | ||||||||||||||
| 2" | 4 1/2" | 2 1/4" | 4" | 1 11/16" | 1 3/16" | 1 13/16" | 5/8" | Plastic | 1 1/4", 1 3/4" | No | No. 10 | Mounting Bracket, Two 1/4" Dia. × 48" Lg. Connecting Rods | 00000000 | 0000000 |
Paddle-Handle Multipoint Locks
A paddle handle activates the top and bottom spring-loaded latching points to secure large cabinet doors. The handle does not latch. Mount these latches vertically or horizontally. They have two connecting rods that can be cut to fit 3-ft. to 8-ft. high doors.
Choose keyed alike locks when you need several locks that open with the same key.
Keyed differently locks each open with a different key.
For technical drawings and 3-D models, click on a part number.
Latch Bolt Housing | For Cutout | Latch Bolt | Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Keying | For Max. Door Thick. | Ht. | Wd. | Ht. | Wd. | Projection | Rear Projection | Projection | Material | Mounting Hole Ctr.-to-Ctr. | Fasteners Included | Screw Size | No. of Keys Included | Includes | Each | |
Mortise Mount | ||||||||||||||||
Zinc-Plated Steel with Black Powder Coated Zinc Handle | ||||||||||||||||
| Keyed Alike | 2" | 4 1/2" | 2 1/4" | 4" | 1 11/16" | 1 3/16" | 1 13/16" | 5/8" | Plastic | 1 1/4", 1 3/4" | No | No. 10 | 2 | Mounting Bracket, Two 1/4" Dia. × 48" Lg. Connecting Rods | 0000000 | 0000000 |
| Keyed Differently | 2" | 4 1/2" | 2 1/4" | 4" | 1 11/16" | 1 3/16" | 1 13/16" | 5/8" | Plastic | 1 1/4", 1 3/4" | No | No. 10 | 2 | Mounting Bracket, Two 1/4" Dia. × 48" Lg. Connecting Rods | 00000000 | 000000 |
| For Keying | Key Number | Each | |
| Keyed Alike | TM904 | 0000000 | 000000 |
Resettable Combination Cam Locks
Set a combination and reset it at any time. After dialing the combination, turn the knob to unlatch. Select the turn direction when mounting the cam. Each lock comes with two straight cams and a reversible offset cam to accommodate different latching distances.
For technical drawings and 3-D models, click on a part number.
Straight Cam | Offset Cam | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Thick. | Latching Distance | For Through Hole Dia. | Head Dia. | Lg. | Wd. | Lg. | Wd. | Mounting Fasteners Included | No. of Possible Combinations | For Use On | Each | |
Black Painted Zinc | ||||||||||||
| 3/8" | 1/8", 3/8", 5/8" | 3/4" | 1 1/2" | 3/4", 1 1/2" | 1/2" | 1 1/2" | 1/2" | Yes | 1,000 | Metal, Plastic, Wood | 0000000 | 000000 |
| 5/8" | 3/8", 5/8", 7/8" | 3/4" | 1 1/2" | 3/4", 1 1/2" | 1/2" | 1 1/2" | 1/2" | Yes | 1,000 | Metal, Plastic, Wood | 0000000 | 00000 |
| 7/8" | 5/8", 7/8", 1 1/8" | 3/4" | 1 1/2" | 3/4", 1 1/2" | 1/2" | 1 1/2" | 1/2" | Yes | 1,000 | Metal, Plastic, Wood | 0000000 | 00000 |
Chrome-Plated Zinc—Polished | ||||||||||||
| 3/8" | 1/8", 3/8", 5/8" | 3/4" | 1 1/2" | 3/4", 1 1/2" | 1/2" | 1 1/2" | 1/2" | Yes | 1,000 | Metal, Plastic, Wood | 0000000 | 00000 |
| 5/8" | 3/8", 5/8", 7/8" | 3/4" | 1 1/2" | 3/4", 1 1/2" | 1/2" | 1 1/2" | 1/2" | Yes | 1,000 | Metal, Plastic, Wood | 0000000 | 00000 |
| 7/8" | 5/8", 7/8", 1 1/8" | 3/4" | 1 1/2" | 3/4", 1 1/2" | 1/2" | 1 1/2" | 1/2" | Yes | 1,000 | Metal, Plastic, Wood | 0000000 | 00000 |
| 1 1/8" | 7/8", 1 1/8", 1 3/8" | 3/4" | 1 1/2" | 3/4", 1 1/2" | 1/2" | 1 1/2" | 1/2" | Yes | 1,000 | Metal, Plastic, Wood | 0000000 | 00000 |
Manual-Locking Resettable-Combination Locker Locks
Close the locker door and turn the dial to lock. For security, change the combination in seconds. The back of each lock has a push-button combination changer that allows switching between five three-number combinations. A control key (sold separately) overrides the combination.
All of these locks are factory registered with an exclusive keying system that is unique to your locks. They have concealed mounting bolts to prevent tampering. To determine door swing direction, stand facing the locker. If the hinges are on the right, select a right lock; if they're on the left, select a left lock. Note: When ordering a new system, order a control key (sold separately). When matching an existing group of locks, please specify key number.
For technical drawings and 3-D models, click on a part number.
Case | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Door Swing Direction | For Max. Door Thick. | For Through Hole Dia. | Latch Bolt Projection | Ht. | Wd. | Mounting Hole Ctr.-to-Ctr. | Mounting Fasteners Included | Latching Direction | Material | Dial Material | Choose For New or Existing Systems | Each | |
For Lockers With Automatic Bar-and-Rod Release or Metal Mesh Lockers | |||||||||||||
| Right | 1/8" | 11/16" | 9/32" | 2 7/8" | 1 7/8" | 2 3/16" | Yes | Horizontal | Steel | Black Plastic | 0000000 | 000000 | |
| Left | 1/8" | 11/16" | 9/32" | 2 7/8" | 1 7/8" | 2 3/16" | Yes | Horizontal | Steel | Black Plastic | 0000000 | 00000 | |
Key-Controlled Resettable Combination Padlocks
Open shackle one of two ways: With a control key or with the combination, which you can set and change at any time. Control key is sold separately.
For technical drawings and 3-D models, click on a part number.
Weather-Resistant Extra-Clearance Resettable Combination Padlocks
Vertical shackle clearance is greater than 1". These corrosion-resistant padlocks are well suited for refineries and marine applications. Set your own combination and change it at any time.
Brass-body locks are the most corrosion resistant. Epoxy-coated hardened steel body locks are the strongest lock body and are coated for corrosion resistance.
Locks with hardened steel shackles are more cut resistant than locks with stainless steel shackles. Boron-carbide shackles are the most cut resistant.
Shackle | Body | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Vertical Clearance | Horizontal Clearance | Dia. | Material | Ht. | Wd. | Thick. | Manufacturer and Model No. | Combination Type | No. of Possible Combinations | Features | Each | ||
Solid Epoxy-Coated Hardened Steel Body | |||||||||||||
| A | 2" | 7/8" | 7/16" | Hardened Steel | 2 1/4" | 2 1/2" | 1 3/8" | Super Sesamee K637 | Four Numbers | 10,000 | __ | 0000000 | 000000 |
Solid Brass Body | |||||||||||||
| A | 2 1/4" | 1" | 5/16" | Hardened Steel | 1 11/16" | 1 7/8" | 7/8" | Sesamee 437 | Four Numbers | 10,000 | __ | 000000 | 00000 |
| A | 2 1/2" | 15/16" | 5/16" | Stainless Steel | 1 23/32" | 2 1/16" | 15/16" | Abus Lock 180IB/50HB63 | Four Numbers | 10,000 | __ | 0000000 | 00000 |
| A | 4" | 1" | 5/16" | Hardened Steel | 1 11/16" | 1 7/8" | 7/8" | Sesamee K440 | Four Numbers | 10,000 | __ | 000000 | 00000 |
| B | 2 1/16" | 15/16" | 3/8" | Boron Carbide | 2" | 2 1/4" | 1 1/4" | Pro Master Lock 1175LH | Four Numbers | 10,000 | Octagonal Shackle | 0000000 | 00000 |
| B | 2 1/16" | 15/16" | 3/8" | Boron Carbide | 2" | 2 1/4" | 1 1/4" | Pro Master Lock 1175LHRS | Four Numbers | 10,000 | __ | 0000000 | 00000 |
| B | 2 1/16" | 1" | 5/16" | Stainless Steel | 1 13/16" | 2 1/4" | 1 1/4" | __ | Four Numbers | 10,000 | __ | 0000000 | 00000 |
Weather- and Cut-Resistant Resettable Combination Padlocks
Shackle is concealed to make it difficult to cut. Set your own combination and change it at any time.
Hardened steel-body lock is stronger than brass-body lock and epoxy coated to provide corrosion resistance.
Brass-body lock is more corrosion resistant than hardened steel-body lock. It also has a boron carbide shackle, which is harder and more corrosion resistant than a hardened steel shackle.
For technical drawings and 3-D models, click on a part number.
Shackle | Body | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Vertical Clearance | Horizontal Clearance | Dia. | Material | Ht. | Wd. | Thick. | Color | Manufacturer and Model No. | Manufacturer Series | Combination Type | No. of Possible Combinations | Each | ||
Solid Brass Body | ||||||||||||||
| A | 1 1/16" | 15/16" | 3/8" | Boron Carbide | 2" | 2 1/4" | 1 1/4" | __ | Master Lock 1177D | Pro | Four Numbers | 10,000 | 0000000 | 000000 |
Solid Epoxy-Coated Hardened Steel Body | ||||||||||||||
| B | 1" | 7/8" | 7/16" | Hardened Steel | 3" | 2 1/2" | 1 3/8" | Black | Sesamee K646 | Super Sesamee | Four Numbers | 10,000 | 0000000 | 00000 |
Extra-Clearance Key-Controlled Resettable Combination Padlocks
Vertical shackle clearance is greater than 1”. Open shackle one of two ways: With a control key or with the combination, which you can set and change at any time. Control key is sold separately.
For technical drawings and 3-D models, click on a part number.
Padlock | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shackle | Body | Control Key | ||||||||||||
| Vertical Clearance | Horizontal Clearance | Dia. | Material | Ht. | Wd. | Thick. | Manufacturer and Model No. | Combination Type | No. of Possible Combinations | No. of Tumbler Pins | Each | Each | ||
Solid Brass Body | ||||||||||||||
| 2 1/8" | 1" | 5/16" | Hardened Steel | 1 7/8" | 2" | 15/16" | Master Lock 176LH | Four Numbers | 10,000 | 4 | 0000000 | 000000 | 0000000 | 00000 |
Key-Controlled Combination Padlocks
Open the shackle with a control key as well as the combination. Control keys are sold separately.
Factory-registered locks give you an exclusive keying system that is unique to your locks. If matching factory-registered locks to an existing system, please specify the key number of the existing system.
For technical drawings and 3-D models, click on a part number.
Padlocks | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shackle | Body | Control Keys | |||||||||||
| For New or Existing Systems | Vertical Clearance | Horizontal Clearance | Dia. | Material | Dia. | Thick. | Manufacturer and Model No. | Combination Type | No. of Tumbler Pins | Each | Each | ||
Padlocks | |||||||||||||
Solid Stainless Steel Body | |||||||||||||
| __ | 3/4" | 13/16" | 9/32" | Hardened Steel | 1 7/8" | 1" | Master Lock 1525 | Three Numbers | 4 | 0000000 | 000000 | 0000000 | 00000 |
Factory-Registered Padlocks | |||||||||||||
Solid Stainless Steel Body | |||||||||||||
| New | 3/4" | 13/16" | 9/32" | Hardened Steel | 1 7/8" | 1" | Master Lock 1525 | Three Numbers | 4 | 00000000 | 00000 | 00000000 | 0000 |
| Existing | 3/4" | 13/16" | 9/32" | Hardened Steel | 1 7/8" | 1" | Master Lock 1525 | Three Numbers | 4 | 00000000 | 00000 | 00000000 | 0000 |
Weather-Resistant Resettable Combination Padlocks
Set your own combination and change it at any time.
Hardened steel-body lock is the strongest lock and epoxy coated for corrosion resistance. Zinc-body lock is more corrosion resistant than hardened steel-body lock, while brass-body lock is the most corrosion resistant.
For technical drawings and 3-D models, click on a part number.
Shackle | Body | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Vertical Clearance | Horizontal Clearance | Dia. | Material | Ht. | Wd. | Thick. | Color | Manufacturer and Model No. | Manufacturer Series | Combination Type | No. of Possible Combinations | Each | |
Solid Brass Body | |||||||||||||
| 1" | 1" | 5/16" | Hardened Steel | 1 11/16" | 1 7/8" | 7/8" | __ | Sesamee 436 | __ | Four Numbers | 10,000 | 000000 | 000000 |
Solid Epoxy-Coated Zinc Body | |||||||||||||
| 1" | 1" | 5/16" | Hardened Steel | 1 11/16" | 1 7/8" | 7/8" | Black | Sesamee K500 3/4 | __ | Four Numbers | 10,000 | 000000 | 00000 |
Solid Epoxy-Coated Hardened Steel Body | |||||||||||||
| 1" | 7/8" | 7/16" | Hardened Steel | 2 1/4" | 2 1/2" | 1 3/8" | Black | Sesamee K636 | Super Sesamee | Four Numbers | 10,000 | 0000000 | 00000 |
High-Security Key-Controlled Combination Padlocks
Compared to other combination padlocks, these have a reinforced body and dial, making the lock more difficult to shim and pull apart. The dial rim is also recessed to prevent tampering.
Open the shackle with a control key as well as the combination. All of these locks are factory registered to give you an exclusive keying system that is unique to your locks. If matching factory-registered locks to an existing system, please specify the key number of the existing system. Control keys are sold separately.
For technical drawings and 3-D models, click on a part number.
Padlocks | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shackle | Body | Control Keys | |||||||||||
| For New or Existing Systems | Vertical Clearance | Horizontal Clearance | Dia. | Material | Dia. | Thick. | Manufacturer and Model No. | Combination Type | No. of Tumbler Pins | Each | Each | ||
Factory-Registered | |||||||||||||
Solid Stainless Steel Body | |||||||||||||
| New | 1" | 15/16" | 5/16" | Hardened Steel | 2 3/16" | 1 1/2" | Master Lock 2010 | Three Numbers | 4 | 00000000 | 000000 | 00000000 | 00000 |
| Existing | 1" | 15/16" | 5/16" | Hardened Steel | 2 3/16" | 1 1/2" | Master Lock 2010 | Three Numbers | 4 | 00000000 | 00000 | 00000000 | 0000 |
Combination Padlocks
For technical drawings and 3-D models, click on a part number.
Shackle | Body | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Vertical Clearance | Horizontal Clearance | Dia. | Material | Dia. | Thick. | Manufacturer and Model No. | Combination Type | Each | |
Solid Stainless Steel Body | |||||||||
| 3/4" | 13/16" | 9/32" | Hardened Steel | 1 7/8" | 1" | Master Lock 1500 | Three Numbers | 0000000 | 00000 |
TSA-Accessible Resettable Combination Padlocks
Lock secures your equipment cases during travel, but allows Transportation Security Administration personnel to open your luggage. An opened indicator changes from green to red to alert you if the lock was opened. You can set your own combination and change it at any time.
For technical drawings and 3-D models, click on a part number.
Shackle | Body | Cover | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Vertical Clearance | Horizontal Clearance | Dia. | Material | Ht. | Wd. | Thick. | Color | Material | Combination Type | No. of Possible Combinations | Each | |
Solid Aluminum Body | ||||||||||||
| 3/4" | 1/2" | 1/8" | Hardened Steel | 1 7/16" | 1 5/16" | 9/16" | Black | Plastic | Three Numbers | 1,000 | 000000 | 00000 |
Extra-Clearance Combination Padlocks
Vertical shackle clearance is greater than 1”.
For technical drawings and 3-D models, click on a part number.
Extra-Clearance Resettable Combination Padlocks
Vertical shackle clearance is greater than 1”. Set your own combination and change it at any time.
Zinc-body locks are more corrosion resistant than steel-body locks, but not as strong.
For technical drawings and 3-D models, click on a part number.
Shackle | Body | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Vertical Clearance | Horizontal Clearance | Dia. | Material | Ht. | Wd. | Thick. | Color | Manufacturer and Model No. | Bumper Color | Combination Type | No. of Possible Combinations | Each | |
(A) Solid Zinc Body | |||||||||||||
| 1 1/8" | 1 3/8" | 1/4" | Hardened Steel | 1 1/4" | 2 3/4" | 1 1/4" | Black | __ | __ | Five Letters | 50,000 | 000000 | 000000 |
(B) Laminated Nickel-Plated Steel Body | |||||||||||||
| 2 1/4" | 15/16" | 5/16" | Hardened Steel | 1 1/2" | 2" | 1 1/4" | __ | __ | Black | Four Numbers | 10,000 | 00000000 | 00000 |
(C) Solid Chrome-Plated Steel Body | |||||||||||||
| 2" | 1 1/8" | 5/16" | Hardened Steel | 2 1/16" | 2" | 3/4" | __ | Abus Lock 160/50HB/50 | __ | Four Numbers | 10,000 | 0000000 | 00000 |
Choose-a-Color Resettable Combination Padlocks
Set your own combination and change it at any time.
For technical drawings and 3-D models, click on a part number.
Extra-Clearance Key-Controlled Combination Padlocks
Vertical shackle clearance is greater than 1". Open the shackle with a control key as well as the combination. Control keys are sold separately.
Factory-registered locks give you an exclusive keying system that is unique to your locks. If matching factory-registered locks to an existing system, please specify the key number of the existing system.
For technical drawings and 3-D models, click on a part number.
Padlocks | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shackle | Body | Control Keys | |||||||||||
| For New or Existing Systems | Vertical Clearance | Horizontal Clearance | Dia. | Material | Dia. | Thick. | Manufacturer and Model No. | Combination Type | No. of Tumbler Pins | Each | Each | ||
Padlocks | |||||||||||||
Solid Stainless Steel Body | |||||||||||||
| __ | 1 1/2" | 13/16" | 9/32" | Hardened Steel | 1 7/8" | 1" | Master Lock 1525 | Three Numbers | 4 | 0000000 | 000000 | 0000000 | 00000 |
Factory-Registered Padlocks | |||||||||||||
Solid Stainless Steel Body | |||||||||||||
| New | 1 1/2" | 13/16" | 9/32" | Hardened Steel | 1 7/8" | 1" | Master Lock 1525 | Three Numbers | 4 | 00000000 | 00000 | 00000000 | 0000 |
| New | 2" | 13/16" | 9/32" | Hardened Steel | 1 7/8" | 1" | Master Lock 1525 | Three Numbers | 4 | 00000000 | 00000 | 00000000 | 0000 |
| Existing | 1 1/2" | 13/16" | 9/32" | Hardened Steel | 1 7/8" | 1" | Master Lock 1525 | Three Numbers | 4 | 00000000 | 00000 | 00000000 | 0000 |
| Existing | 2" | 13/16" | 9/32" | Hardened Steel | 1 7/8" | 1" | Master Lock 1525 | Three Numbers | 4 | 00000000 | 00000 | 00000000 | 0000 |
Resettable Combination Padlocks
Set your own combination and change it at any time.
The aluminum-body locks are more corrosion resistant than the steel-body locks. The steel-body locks are the strongest.
Hardened steel shackles are stronger than steel shackles.
Shackle | Body | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Combination Type | No. of Possible Combinations | Vertical Clearance | Horizontal Clearance | Dia. | Material | Ht. | Wd. | Thick. | Manufacturer and Model No. | Bumper Color | Each | |
(A) Solid Aluminum Body | ||||||||||||
| Three Numbers | 1,000 | 1" | 9/16" | 3/16" | Nickel-Plated Steel | 2 3/4" | 1 3/16" | 19/32" | Master Lock 630D | __ | 0000000 | 000000 |
(A) Solid Steel Body | ||||||||||||
| Three Numbers | 1,000 | 11/16" | 3/8" | 1/8" | Steel | 2 1/4" | 13/16" | 1/2" | Master Lock 646D | __ | 0000000 | 0000 |
| Three Numbers | 1,000 | 15/16" | 3/8" | 3/16" | Steel | 2 1/4" | 1 3/16" | 19/32" | Master Lock 647D | __ | 0000000 | 0000 |
(B) Solid Brass-Plated Aluminum Body | ||||||||||||
| Four Numbers | 10,000 | 7/8" | 7/8" | 1/4" | Steel | 1 13/16" | 1 9/16" | 5/8" | Master Lock 643D | __ | 0000000 | 00000 |
(B) Solid Chrome-Plated Steel Body | ||||||||||||
| Four Numbers | 10,000 | 1" | 3/4" | 1/4" | Hardened Steel | 1 7/8" | 1 1/2" | 3/4" | Abus Lock 155/40 C | __ | 0000000 | 00000 |
(C) Solid Aluminum Body | ||||||||||||
| Four Letters | 10,000 | 7/8" | 7/8" | 1/4" | Steel | 3 3/16" | 1 9/16" | 19/32" | Master Lock 643DWD | __ | 0000000 | 00000 |
(D) Solid Chrome-Plated Steel Body | ||||||||||||
| Three Numbers | 1,000 | 7/8" | 15/16" | 1/4" | Hardened Steel | 1 3/4" | 1 1/2" | 3/4" | Abus Lock 160/40 | __ | 0000000 | 00000 |
(E) Solid Chrome-Plated Steel Body | ||||||||||||
| Four Numbers | 10,000 | 1" | 1 1/8" | 5/16" | Hardened Steel | 2 1/16" | 2" | 3/4" | Abus Lock 160/50 | __ | 0000000 | 00000 |
(F) Laminated Nickel-Plated Steel Body | ||||||||||||
| Three Numbers | 1,000 | 1" | 13/16" | 1/4" | Hardened Steel | 1 1/2" | 1 9/16" | 7/8" | __ | Blue | 00000000 | 00000 |