McMaster-Carr logo
    Filter by
    Number of Circuits
    Attribute Image
    Mounting Location
    Number of Terminals per Circuit
    System of Measurement
    For Thermocouple Wire Type
    DIN Rail Trade Size
    Maximum Temperature
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DIN Rail Height
    DFARS Specialty Metals
    RTD Probe Resistance
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    137 Products

    Mounting Location

    Pluggable

    Performance

    Terminal Blocks for RTD and Thermocouple Connection Heads

    Image of Product. Oblong. Front orientation. Terminal Blocks. Terminal Blocks for RTD and Thermocouple Connection Heads, Oblong, Screw-Terminal Wire Connection.
    Image of Product. Round. Front orientation. Terminal Blocks. Terminal Blocks for RTD and Thermocouple Connection Heads, Round, Screw-Terminal Wire Connection.

    Oblong

    Round

    These terminal blocks fit inside connection heads for thermocouples and RTD. Make sure the block has enough circuits for your probe, and use a wire that matches your probe type. You can insert stripped wire directly or attach a terminal to prevent damage from the fastener.
    Mounting
    Slots
    No. of
    Circuits
    For Max.
    Wire Ga.
    Wire
    Connection
    Dia.
    Ht.
    Wd.
    Dp.
    For Thermocouple
    Wire Type
    For RTD Probe Resistance,
    ohm
    Max. Temp.,
    ° F
    Material
    Ht.
    Wd.
    No.
    of
    Each
    Oblong
    214
    		Screw Terminal—1 3/8"2"1"J, JX, K, KK, KX, T, TX100; 1,0001,000Ceramic3/16"9/16"200000000000000
    314
    		Screw Terminal—1 3/8"2"1"J, JX, K, KK, KX, T, TX100; 1,0001,000Ceramic3/16"9/16"20000000000000
    414
    		Screw Terminal—1 3/8"2"1"J, JX, K, KK, KX, T, TX100; 1,0001,000Ceramic3/16"9/16"2000000000000
    614
    		Screw Terminal—1 3/8"2"1"J, JX, K, KK, KX, T, TX100; 1,0001,000Ceramic3/16"9/16"2000000000000
     
    Round
    214
    		Screw Terminal1 15/16"——3/4"J, JX, K, KK, KX, T, TX100; 1,0001,000Ceramic3/16"5/16"2000000000000
    314
    		Screw Terminal1 15/16"——3/4"J, JX, K, KK, KX, T, TX100; 1,0001,000Ceramic3/16"5/16"2000000000000
    414
    		Screw Terminal1 15/16"——3/4"J, JX, K, KK, KX, T, TX100; 1,0001,000Ceramic3/16"5/16"2000000000000
    614
    		Screw Terminal1 15/16"——3/4"J, JX, K, KK, KX, T, TX100; 1,0001,000Ceramic3/16"5/16"2000000000000
     

    Modular DIN-Rail Mount Terminal Blocks

    Image of System. Front orientation. Contains Annotated. Terminal Blocks. Modular DIN-Rail Mount Terminal Blocks.
    Mix and match these terminal blocks to get the exact number of circuits you need in a single setup. Add blocks for thermocouples, fuses, and grounding wire as needed. The blocks clip side by side onto DIN rail in control panels, creating tidy rows of circuits that you can identify and access on the spot.
    The screw-clamp terminals flatten your wire so it stays put when vibrated or pulled. If you need to change wiring frequently without adjusting a screw, consider a quick-connect terminal block with spring-clamp or lever-clamp terminals.
    Terminal Blocks with Screw-Clamp Terminals
    Image of Product. Front orientation. Terminal Blocks. Modular DIN-Rail Mount Terminal Blocks, Terminal Blocks with Screw-Clamp Terminals.
    Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.
    End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.
    Bar Jumpers—Metal poles create an electrical connection between blocks, so you can connect multiple components with a single wire. Blocks must be the same width for the jumpers to fit. Cut jumpers to size with a hacksaw or high-force wire cutter. Add covers so jumpers don't touch the screws on the outermost blocks.
    Insulation—Terminal blocks with insulated jumpers maintain their IP20 rating to prevent shocks and short circuits. Blocks with noninsulated jumpers lose their IP20 rating for touch protection because the jumpers introduce exposed metal to the circuit.
    Terminal Blocks
    Covers
    End Stops
    Bar Jumpers
    Each
    No. of
    Circuits
    No. of Terminals
    per Circuit
    For Wire
    Ga.
    Wd.,
    mm
    Ht.,
    mm
    For DIN Rail
    Trade Size
    Enclosure
    Rating
    Color
    1-24
    25-Up
    Each
    Each
    Insulation
    Each
     
    600V AC—32 amp per Circuit
    1622 to 12687.51, 3IP20
    		Black00000000000000000000———0———0————0
     
    630V AC/630V DC—24 amp per Circuit
    2222 to 12565.51, 3IP20
    		Beige00000000000000000000000000000000000000000Insulated00000000000000
    2222 to 12565.51, 3IP20
    		Blue000000000000000000000000000000000000000Insulated0000000000000
    2222 to 12565.51, 3IP20
    		Gray000000000000000000000000000000000000000Insulated0000000000000
     
    800V AC/800V DC—32 amp per Circuit
    1322 to 10651.51, 3IP20
    		Gray000000000000000000000000000000000000000Insulated0000000000000
    1422 to 10663.51, 3IP20
    		Gray000000000000000000000000000000000000000Insulated0000000000000
     
    Markers
    Image of Product. Front orientation. Terminal Block Markers. Blank.
    Image of Product. Front orientation. Terminal Block Markers. Numbered for Horizontal Rails.

    Blank

    Numbered

    for

    Horizontal

    Rails

    Image of Product. Front orientation. Terminal Block Markers. Numbered for Vertical Rails.

    Numbered

    for

    Vertical

    Rails

    Label your terminal block connections so you can identify them at a glance.
    Each
    For No. of
    Circuits
    For Terminal
    Block Wd., mm
    Number
    Range
    Markers
    per Card
    Color
    1-24
    25-Up
    Blank
    1, 25—100White000000000000000000
    1, 26—100White000000000000000
     
    Numbered for Horizontal Rails
    1, 251 to 100100White000000000000000
    1, 25101 to 200100White000000000000000
    1, 261 to 100100White000000000000000
    1, 26101 to 200100White000000000000000
     
    Numbered for Vertical Rails
    1, 251 to 100100White000000000000000
    1, 25101 to 200100White000000000000000
    1, 261 to 100100White000000000000000
    1, 26101 to 200100White000000000000000
     
    Ground Terminal Blocks with Screw-Clamp Terminals
    Image of Product. Front orientation. Terminal Blocks. Modular DIN-Rail Mount Terminal Blocks, Ground Terminal Blocks with Screw-Clamp Terminals.
    Connect grounding wire to DIN rail so fault currents can safely flow to ground. These terminal blocks should only be used for grounding circuits.
    End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.
    Terminal Blocks
    End Stops
    Each
    No. of
    Circuits
    No. of Terminals
    per Circuit
    For Wire
    Ga.
    Wd.,
    mm
    Ht.,
    mm
    Color
    For DIN Rail
    Trade Size
    Enclosure
    Rating
    1-24
    25-Up
    Each
    1422 to 10663.5Green/Yellow1, 3IP20
    		000000000000000000000000000000
    1722 to 12690Green/Yellow1, 3IP20
    		000000000000000000000000000000
     
    Markers
    Image of Product. Front orientation. Terminal Block Markers. Blank.
    Image of Product. Front orientation. Terminal Block Markers. Numbered for Horizontal Rails.
    Image of Product. Front orientation. Terminal Block Markers. Numbered for Vertical Rails.

    Blank

    Numbered

    for

    Horizontal

    Rails

    Numbered

    for

    Vertical

    Rails

    Label your terminal block connections so you can identify them at a glance.
    Each
    For No. of
    Circuits
    For Terminal
    Block Wd., mm
    Number
    Range
    Markers
    per Card
    Color
    1-24
    25-Up
    Blank
    1, 26—100White00000000000000000
     
    Numbered for Horizontal Rails
    1, 261 to 100100White000000000000000
    1, 26101 to 200100White000000000000000
     
    Numbered for Vertical Rails
    1, 261 to 100100White000000000000000
    1, 26101 to 200100White000000000000000
     
    Fuse Terminal Blocks with Screw-Clamp Terminals
    Image of Product. Front orientation. Terminal Blocks. Modular DIN-Rail Mount Terminal Blocks, Fuse Terminal Blocks with Screw-Clamp Terminals.
    Install a fuse in the built-in fuse holder so excess current doesn't damage your equipment. If the current exceeds the limit, the fuse will blow and cut power to connected components.
    Blown Fuse Indicator—A light goes on when the fuse blows, so you can spot an overloaded circuit without cutting power or touching equipment.
    Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.
    End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.
    Bar Jumpers—Metal poles create an electrical connection between blocks, so you can connect multiple components with a single wire. Blocks must be the same width for the jumpers to fit. Cut jumpers to size with a hacksaw or high-force wire cutter. Add covers so jumpers don't touch the screws on the outermost blocks.
    Insulation—Terminal blocks with insulated jumpers maintain their IP20 rating to prevent shocks and short circuits. Blocks with noninsulated jumpers lose their IP20 rating for touch protection because the jumpers introduce exposed metal to the circuit.
    Terminal Blocks
    Covers
    End Stops
    Bar Jumpers
    For Fuse
    Each
    No. of
    Circuits
    No. of Terminals
    per Circuit
    For Wire
    Ga.
    Wd.,
    mm
    Ht.,
    mm
    Overall
    Dia., mm
    Overall
    Lg., mm
    Type
    Circuit Status
    Indicator Type
    Blown Fuse Indicator
    Voltage
    For DIN Rail
    Trade Size
    Enclosure
    Rating
    Color
    1-24
    25-Up
    Each
    Each
    Insulation
    Each
     
    300V AC/300V DC—6.3 amp per Circuit
    2
    1 (Ground)    		2
    1 (Ground)    		20 to 12899520Ceramic, Glass——3IP20
    		Gray0000000000000000000000000000000000000000000000Noninsulated0000000000000
    2
    1 (Ground)    		2
    1 (Ground)    		20 to 12899520Ceramic, GlassBlown Fuse24V DC
    60V DC
    110V AC    		3IP20
    		Gray000000000000000000000000000000000000000000Noninsulated000000000000
    2
    1 (Ground)    		2
    1 (Ground)    		20 to 12899520Ceramic, GlassBlown Fuse110V AC
    230V AC    		3IP20
    		Gray000000000000000000000000000000000000000000Noninsulated000000000000
     
    600V AC—6.3 amp per Circuit
    2224 to 12885.5520Ceramic, GlassBlown Fuse110V AC
    230V AC    		1, 3IP20
    		Gray000000000000000000000000000000000000000000Insulated0000000000000
    2212
    		885.5520Ceramic, GlassBlown Fuse24V AC
    24V DC    		1, 3IP20
    		Gray000000000000000000000000000000000000000000Insulated0000000000000
     
    630V AC/630V DC—6.3 amp per Circuit
    2224 to 12885.5520Ceramic, Glass——1, 3IP20
    		Gray000000000000000000000000000000000000000000Insulated0000000000000
     
    Markers
    Image of Product. Front orientation. Terminal Block Markers. Blank.
    Image of Product. Front orientation. Terminal Block Markers. Numbered for Horizontal Rails.
    Image of Product. Front orientation. Terminal Block Markers. Numbered for Vertical Rails.

    Blank

    Numbered

    for

    Horizontal

    Rails

    Numbered

    for

    Vertical

    Rails

    Label your terminal block connections so you can identify them at a glance.
    Each
    For No. of
    Circuits
    For Terminal Block Wd., mm
    Number
    Range
    Markers
    per Card
    Color
    1-24
    25-Up
    Blank
    1, 28, 10, 12, 13, 16, 22—100White000000000000000000
     
    Numbered for Horizontal Rails
    1, 28, 10, 12, 13, 16, 221 to 100100White0000000000000000
    1, 28, 10, 12, 13, 16, 22101 to 200100White0000000000000000
     
    Numbered for Vertical Rails
    1, 28, 10, 12, 13, 16, 221 to 100100White0000000000000000
    1, 28, 10, 12, 13, 16, 22101 to 200100White0000000000000000
     
    Disconnect Terminal Blocks with Screw-Clamp Terminals
    Image of Product. Front orientation. Terminal Blocks. Modular DIN-Rail Mount Terminal Blocks, Disconnect Terminal Blocks with Screw-Clamp Terminals.
    Test and troubleshoot circuits without removing any wire. Flip the tab by hand or with a screwdriver to open and close the circuit.
    Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.
    End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.
    Adjacent Jumpers—Metal poles create an electrical connection between adjacent terminal blocks, so you can connect multiple components with a single wire. Blocks must be the same width for the jumpers to fit.
    Insulation—Terminal blocks with insulated jumpers maintain their IP20 rating to prevent shocks and short circuits. Blocks with noninsulated jumpers lose their IP20 rating for touch protection because the jumpers introduce exposed metal to the circuit.
    Terminal Blocks
    Covers
    End Stops
    Adjacent Jumpers
    Each
    No. of
    Circuits
    No. of Terminals
    per Circuit
    For Wire
    Ga.
    Wd.,
    mm
    Ht.,
    mm
    Color
    For DIN Rail
    Trade Size
    Enclosure
    Rating
    1-24
    25-Up
    Each
    Each
    Insulation
    Each
     
    320V AC/320V DC—10 amp per Circuit
    1212
    		544.5Gray/Orange1, 3IP20
    		000000000000000000000000000000000000000000Noninsulated0000000000000
     
    Markers
    Image of Product. Front orientation. Terminal Block Markers. Blank.
    Image of Product. Front orientation. Terminal Block Markers. Numbered for Horizontal Rails.
    Image of Product. Front orientation. Terminal Block Markers. Numbered for Vertical Rails.

    Blank

    Numbered

    for

    Horizontal

    Rails

    Numbered

    for

    Vertical

    Rails

    Label your terminal block connections so you can identify them at a glance.
    Each
    For No. of
    Circuits
    For Terminal
    Block Wd., mm
    Number
    Range
    Markers
    per Card
    Color
    1-24
    25-Up
    Blank
    1, 25—100White000000000000000000
     
    Numbered for Horizontal Rails
    1, 251 to 100100White000000000000000
    1, 25101 to 200100White000000000000000
     
    Numbered for Vertical Rails
    1, 251 to 100100White000000000000000
    1, 25101 to 200100White000000000000000
     
    Disconnect Terminal Blocks with Test Sockets and Screw-Clamp Terminals
    Image of Product. Front orientation. Terminal Blocks. Modular DIN-Rail Mount Terminal Blocks, Disconnect Terminal Blocks with Test Sockets and Screw-Clamp Terminals.
    Plug voltage meters into the built-in sockets to confirm the voltage is right for your application. You can also test and troubleshoot circuits without removing any wire. Push, turn, and release the knob to break your connection. When the knob is released, stick a wire through the hole so you can't accidentally reconnect the circuit—similar to a lockout tag.
    Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.
    End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.
    Adjacent Jumpers—Metal poles create an electrical connection between adjacent terminal blocks, so you can connect multiple components with a single wire. Blocks must be the same width for the jumpers to fit.
    Terminal Blocks
    Covers
    End Stops
    Adjacent Jumpers
    Test Plugs
    Each
    No. of
    Circuits
    No. of Terminals
    per Circuit
    For Wire
    Ga.
    Wd.,
    mm
    Ht.,
    mm
    Color
    For DIN Rail
    Trade Size
    Enclosure
    Rating
    1-24
    25-Up
    Each
    Each
    Insulation
    Each
    Each
     
    500V AC/500V DC—15 amp per Circuit
    1222 to 8855.5Gray/Black1, 3IP10
    		0000000000000000000000000000000000000000000Insulated00000000000000000000000000
    1222 to 8855.5Gray/Red1, 3IP10
    		000000000000000000000000000000000000000Insulated000000000000000000000000
    1222 to 8855.5Gray/Yellow1, 3IP10
    		000000000000000000000000000000000000000Insulated000000000000000000000000
     
    Markers
    Image of Product. Front orientation. Terminal Block Markers. Blank.
    Image of Product. Front orientation. Terminal Block Markers. Numbered for Horizontal Rails.
    Image of Product. Front orientation. Terminal Block Markers. Numbered for Vertical Rails.

    Blank

    Numbered

    for

    Horizontal

    Rails

    Numbered

    for

    Vertical

    Rails

    Label your terminal block connections so you can identify them at a glance.
    Each
    For No. of
    Circuits
    For Terminal Block Wd., mm
    Number
    Range
    Markers
    per Card
    Color
    1-24
    25-Up
    Blank
    1, 28, 10, 12, 13, 16, 22—100White000000000000000000
     
    Numbered for Horizontal Rails
    1, 28, 10, 12, 13, 16, 221 to 100100White0000000000000000
    1, 28, 10, 12, 13, 16, 22101 to 200100White0000000000000000
     
    Numbered for Vertical Rails
    1, 28, 10, 12, 13, 16, 221 to 100100White0000000000000000
    1, 28, 10, 12, 13, 16, 22101 to 200100White0000000000000000
     
    Thermocouple Terminal Blocks with Screw-Clamp Terminals
    Image of Product. Front orientation. Terminal Blocks. Modular DIN-Rail Mount Terminal Blocks, Thermocouple Terminal Blocks with Screw-Clamp Terminals.
    Run your thermocouple wire into these blocks so no signal is lost or destroyed. The metal in the terminals is compatible with multiple thermocouple wire types.
    Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.
    End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.
    Terminal Blocks
    Covers
    End Stops
    Each
    No. of
    Circuits
    No. of Terminals
    per Circuit
    For Wire
    Ga.
    Wd.,
    mm
    Ht.,
    mm
    For Thermocouple
    Wire Type
    Color
    For DIN Rail
    Trade Size
    Enclosure
    Rating
    1-24
    25-Up
    Each
    Each
     
    500V AC/500V DC
    1224 to 2644.5J, K, TGray1, 3IP20
    		00000000000000000000000000000000000000000000
     
    Markers
    Image of Product. Front orientation. Terminal Block Markers. Blank.
    Image of Product. Front orientation. Terminal Block Markers. Numbered for Horizontal Rails.
    Image of Product. Front orientation. Terminal Block Markers. Numbered for Vertical Rails.

    Blank

    Numbered

    for

    Horizontal

    Rails

    Numbered

    for

    Vertical

    Rails

    Label your terminal block connections so you can identify them at a glance.
    Each
    For No. of
    Circuits
    For Terminal
    Block Wd., mm
    Number
    Range
    Markers
    per Card
    Color
    1-24
    25-Up
    Blank
    1, 26—100White00000000000000000
     
    Numbered for Horizontal Rails
    1, 261 to 100100White000000000000000
    1, 26101 to 200100White000000000000000
     
    Numbered for Vertical Rails
    1, 261 to 100100White000000000000000
    1, 26101 to 200100White000000000000000
     

    Quick-Connect Modular DIN-Rail Mount Terminal Blocks

    Image of System. Front orientation. Contains Annotated. Terminal Blocks. Quick-Connect Modular DIN-Rail Mount Terminal Blocks.
    Pop wire in and out of these terminal blocks without adjusting a screw. Lift the clamp with a screwdriver or built-in lever, then release the clamp down onto the wire. Once clamped in place, the wire will stay put when vibrated, bent, or pulled.
    Mix and match these terminal blocks to get the exact number of circuits you need in a single setup. Add blocks for thermocouples, fuses, and grounding wire as needed. The blocks clip side by side onto DIN rail in control panels, creating tidy rows of circuits that you can identify and access on the spot.
    Terminal Blocks with Spring-Clamp Terminals
    Image of Product. Front orientation. Terminal Blocks. Quick-Connect Modular DIN-Rail Mount Terminal Blocks, Terminal Blocks with Spring-Clamp Terminals.
    Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.
    End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.
    Adjacent Jumpers—Metal poles create an electrical connection between adjacent terminal blocks, so you can connect multiple components with a single wire. Blocks must be the same width for the jumpers to fit.
    Alternate Jumpers—Connect terminals on two blocks of the same width, skipping a block in between. This reduces wire clutter and gives you flexibility to adjust your set-up in the future.
    Terminal Blocks
    Covers
    End Stops
    Adjacent Jumpers
    Alternate Jumpers
    Each
    No. of
    Circuits
    No. of Terminals
    per Circuit
    For Wire
    Ga.
    Wd.,
    mm
    Ht.,
    mm
    For DIN Rail
    Trade Size
    Choose a Color
    1-24
    25-Up
    Each
    Each
    Insulation
    Each
    Insulation
    Each
     
    300V AC/300V DC—15 amp per Circuit
    2228 to 125643
    Blue
    ,
    Gray
    		00000000000000000000000000000000000000000000Insulated0000000000000Insulated0000000000000
    3228 to 1251033
    Blue
    ,
    Gray
    		000000000000000000000000000000000000000000Insulated000000000000Insulated000000000000
     
    600V AC/600V DC—15 amp per Circuit
    1222 to 144.248.53
    Black
    ,
    Blue
    ,
    Gray
    ,
    Orange
    ,
    Red
    ,
    Yellow
    		0000000000000000000000000000000000000000Insulated000000000000Insulated000000000000
    1322 to 144.259.53
    Black
    ,
    Blue
    ,
    Gray
    ,
    Orange
    ,
    Red
    ,
    Yellow
    		0000000000000000000000000000000000000000Insulated000000000000Insulated000000000000
    1422 to 144.2703
    Black
    ,
    Blue
    ,
    Gray
    ,
    Orange
    ,
    Red
    ,
    Yellow
    		0000000000000000000000000000000000000000Insulated000000000000Insulated000000000000
     
    600V AC/600V DC—20 amp per Circuit
    1228 to 125533
    Black
    ,
    Blue
    ,
    Gray
    ,
    Orange
    ,
    Red
    ,
    Yellow
    		00000000000000000000000000000000000000Insulated000000000000Insulated000000000000
    1228 to 126593
    Black
    ,
    Blue
    ,
    Gray
    ,
    Orange
    ,
    Red
    ,
    Yellow
    		000000000000000000000000000000000000000Insulated000000000000Insulated000000000000
    1328 to 125643
    Black
    ,
    Blue
    ,
    Gray
    ,
    Orange
    ,
    Red
    ,
    Yellow
    		00000000000000000000000000000000000000Insulated000000000000Insulated000000000000
    1328 to 12673.53
    Black
    ,
    Blue
    ,
    Gray
    ,
    Orange
    ,
    Red
    ,
    Yellow
    		000000000000000000000000000000000000000Insulated000000000000Insulated000000000000
    1428 to 125753
    Black
    ,
    Blue
    ,
    Gray
    ,
    Orange
    ,
    Red
    ,
    Yellow
    		000000000000000000000000000000000000000Insulated000000000000Insulated000000000000
    1428 to 126863
    Black
    ,
    Blue
    ,
    Gray
    ,
    Orange
    ,
    Red
    ,
    Yellow
    		000000000000000000000000000000000000000Insulated000000000000Insulated000000000000
    2228 to 12673.53
    Blue
    ,
    Gray
    		00000000000000000000000000000000000000000Insulated000000000000Insulated000000000000
     
    600V AC/600V DC—30 amp per Circuit
    1224 to 10874.53
    Blue
    ,
    Gray
    ,
    Orange
    		000000000000000000000000000000000000000Insulated000000000000Insulated000000000000
    1324 to 108933
    Blue
    ,
    Gray
    ,
    Orange
    		000000000000000000000000000000000000000Insulated000000000000Insulated000000000000
     
    600V AC/600V DC—50 amp per Circuit
    1224 to 810783
    Blue
    ,
    Gray
    ,
    Orange
    		000000000000000000000000000000000000000Insulated000000000000Insulated000000000000
    1324 to 81097.53
    Blue
    ,
    Gray
    ,
    Orange
    		00000000000000000000000000000000000000000Insulated000000000000Insulated000000000000
     
    600V AC/600V DC—65 amp per Circuit
    1224 to 61294.53
    Blue
    ,
    Gray
    ,
    Orange
    		0000000000000000000000000000000000000000Insulated000000000000Insulated000000000000
    1324 to 612104.53
    Blue
    ,
    Gray
    ,
    Orange
    		00000000000000000000000000000000000000000————0Insulated000000000000
     
    600V AC/600V DC—115 amp per Circuit
    128 to 2161003
    Blue
    ,
    Gray
    		00000000000000000———0000000000000Insulated000000000000————0
     
    600V AC/600V DC—200 amp per Circuit
    124 to 4/0251073
    Blue
    ,
    Gray
    		00000000000000000———0000000000000Insulated0000000000000————0
     
    Markers
    Image of Product. Front orientation. Terminal Block Markers. Blank.
    Image of Product. Front orientation. Terminal Block Markers. Numbered for Horizontal Rails.
    Image of Product. Front orientation. Terminal Block Markers. Numbered for Vertical Rails.

    Blank

    Numbered

    for

    Horizontal

    Rails

    Numbered

    for

    Vertical

    Rails

    Label your terminal block connections so you can identify them at a glance.
    Each
    For Terminal Block Wd., mm
    Number
    Range
    Includes
    Markers
    per Card
    Color
    1-24
    25-Up
    Blank
    4.2——100White000000000000000000
    5, 6, 8, 10, 12, 16, 25——100White0000000000000000
     
    Numbered for Horizontal Rails
    4.21 to 50Two of Each Number100White00000000000000000
    5, 6, 8, 10, 12, 16, 251 to 50Two of Each Number100White00000000000000000
     
    Numbered for Vertical Rails
    4.21 to 50Two of Each Number100White000000000000000000
    5, 6, 8, 10, 12, 16, 251 to 50Two of Each Number100White000000000000000000
     
    Sensor Terminal Blocks with Spring-Clamp Terminals
    Image of Product. Front orientation. Terminal Blocks. Quick-Connect Modular DIN-Rail Mount Terminal Blocks, Sensor Terminal Blocks with Spring-Clamp Terminals.
    These blocks connect sensors and actuators with NPN and PNP outputs. An LED indicates whether the circuits are powered, making it easier to troubleshoot your system. Mix and match blocks to consolidate wiring for multiple sensors, such as light and photoelectric sensors on a conveyor line. Other terminals on the blocks connect PLCs, data loggers, and other components.
    For NPN Signal Output—These blocks light up when a connected NPN sensor sends a negative signal. They're common in Asian automation systems.
    For PNP Signal Output—These blocks light up when a connected PNP sensor sends a positive signal. They're common in North American and European automation systems.
    Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.
    End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.
    Adjacent Jumpers—Metal poles create an electrical connection between adjacent terminal blocks, so you can connect multiple components with a single wire. Blocks must be the same width for the jumpers to fit.
    Terminal Blocks
    Covers
    End Stops
    Adjacent Jumpers
    No. of
    Circuits
    No. of Terminals
    per Circuit
    For Wire
    Ga.
    Wd.,
    mm
    Ht.,
    mm
    Circuit Status
    Indicator Type
    Color
    For DIN Rail
    Trade Size
    Each
    Each
    Each
    Insulation
    Each
    For NPN Signal Output
     
    24V AC/24V DC—10 amp per Circuit
    4224 to 16781.1PowerGray3000000000000000000000000000000000000000Insulated0000000000000
     
    For PNP Signal Output
     
    24V AC/24V DC—10 amp per Circuit
    4224 to 16781.1PowerGray3000000000000000000000000000000000000Insulated000000000000
     
    Accessories for Terminal Blocks
    Markers
    Image of Product. Front orientation. Terminal Block Markers. Blank.

    Blank

    Label your terminal block connections so you can identify them at a glance.
    For Terminal
    Block Wd., mm
    Markers
    per Card
    Color
    Each
    Blank
    3.5100White0000000000000
     
    Marker Holders
    Image of Product. Bottom orientation. Terminal Block Marker Holders.
    Color
    Each
    Gray0000000000000

    Quick-Connect Plug-and-Socket Modular DIN-Rail Mount Terminal Blocks

    Image of System. Front orientation. Contains Annotated. Terminal Blocks. Quick-Connect Plug-and-Socket Modular DIN-Rail Mount Terminal Blocks.
    Cut power with the pull of a plug when you need to swap out equipment or adjust your circuit. One of the openings on these blocks is a socket, so you can wire a plug outside the enclosure and then attach it to the socket that’s already in place.
    The other connections are spring clamps, so you can pop wire in and out of these terminal blocks without adjusting a screw. Lift the clamp with a screwdriver, then release the clamp down onto the wire. Once clamped in place, the wire will stay put when vibrated, bent, or pulled.
    Mix and match these terminal blocks to get the exact number of circuits you need in a single setup. Add blocks for grounding wire as needed. The blocks clip side by side onto DIN rail in control panels, creating tidy rows of circuits that you can identify and access on the spot.
    Sockets with Spring-Clamp Terminals
    Image of Product. Front orientation. Terminal Blocks. Quick-Connect Plug-and-Socket Modular DIN-Rail Mount Terminal Blocks, Sockets with Spring-Clamp Terminals.
    Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.
    End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.
    Adjacent Jumpers—Metal poles create an electrical connection between adjacent terminal blocks, so you can connect multiple components with a single wire. Blocks must be the same width for the jumpers to fit.
    Terminal Blocks
    Covers
    End Stops
    Adjacent Jumpers
    No. of
    Circuits
    No. of Terminals
    per Circuit
    For Wire
    Ga.
    Wd.,
    mm
    Ht.,
    mm
    Color
    For DIN Rail
    Trade Size
    Each
    Each
    Each
    Insulation
    Each
     
    300V AC/300V DC—10 amp per Circuit
    1124 to 163.548.5Blue300000000000000000000000000000000000000Insulated0000000000000
    1124 to 163.548.5Gray300000000000000000000000000000000000Insulated000000000000
    1124 to 163.558.2Blue300000000000000000000000000000000000Insulated000000000000
    1124 to 163.558.2Gray300000000000000000000000000000000000Insulated000000000000
    1124 to 163.585.25Blue300000000000000000000000000000000000Insulated000000000000
    1124 to 163.585.25Gray300000000000000000000000000000000000Insulated000000000000
     
    Markers
    Image of Product. Front orientation. Terminal Block Markers. Blank.

    Blank

    Label your terminal block connections so you can identify them at a glance.
    For Terminal
    Block Wd., mm
    Markers
    per Card
    Color
    Each
    Blank
    3.5100White0000000000000
     
    Ground Sockets with Spring-Clamp Terminals
    Image of Product. Front orientation. Terminal Blocks. Quick-Connect Plug-and-Socket Modular DIN-Rail Mount Terminal Blocks, Ground Sockets with Spring-Clamp Terminals.
    Connect grounding wire to DIN rail so fault currents can safely flow to ground. These terminal blocks should only be used for grounding circuits.
    Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.
    End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.
    Adjacent Jumpers—Metal poles create an electrical connection between adjacent terminal blocks, so you can connect multiple components with a single wire. Blocks must be the same width for the jumpers to fit.
    Terminal Blocks
    Covers
    End Stops
    Adjacent Jumpers
    No. of
    Circuits
    No. of Terminals
    per Circuit
    For Wire
    Ga.
    Wd.,
    mm
    Ht.,
    mm
    Color
    For DIN Rail
    Trade Size
    Each
    Each
    Each
    Insulation
    Each
    1124 to 163.550.8Green/Yellow300000000000000000000000000000000000000Insulated0000000000000
    1124 to 163.561.8Green/Yellow300000000000000000000000000000000000Insulated000000000000
    1124 to 163.585.25Green/Yellow300000000000000000000000000000000000Insulated000000000000
     
    Markers
    Image of Product. Front orientation. Terminal Block Markers. Blank.

    Blank

    Label your terminal block connections so you can identify them at a glance.
    For Terminal
    Block Wd., mm
    Markers
    per Card
    Color
    Each
    Blank
    3.5100White0000000000000
     
    Plugs with Spring-Clamp Terminals
    Image of Product. Front orientation. Terminal Blocks. Quick-Connect Plug-and-Socket Modular DIN-Rail Mount Terminal Blocks, Plugs with Spring-Clamp Terminals.
    No. of
    Circuits
    No. of Terminals
    per Circuit
    For Wire
    Ga.
    Wd.,
    mm
    Ht.,
    mm
    Color
    Each
     
    300V AC/300V DC—10 amp per Circuit
    1124 to 163.540.5Gray0000000000000
    2224 to 167.748.9Gray0000000000000
     
    back to top