Twist these bumpers into a threaded hole. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces.

All of these bumpers are reinforced with a steel core for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. Twist them into a threaded hole.

All of these bumpers are reinforced with an embedded washer or base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. Install them with screws.

These nonslip bumpers protect equipment while minimizing the movement of objects that come in contact, making them good for positioning and robotic-gripping applications. Install them with adhesives or screws.

The stem on these bumpers compresses to fit into tight holes. Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.

Mount these bumpers on a threaded stud. All are reinforced with a steel core or base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines.

These bumpers withstand temperatures up to 300° F, which is at least twice as high as our other load rated bumpers. Use them in applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, these bumpers absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Mount them on a threaded stud.

Select these bumpers for applications that require specific load capacities. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. Press them into place with the adhesive backing. They're comparable to Bumpon bumpers.

Keep bumpers of various shapes, materials, and mounting styles on hand to solve whatever problems arise.

Simply adhere these silencers to the door frame—no need for an installation hole. Doors close firmly yet quietly with these silencers. They also eliminate the rattling of doors against their frames.

Install these stops in wood or concrete floors to protect walls from large doors in warehouses and manufacturing areas.

The half-dome shape won't catch mops and scrubbers. Install these stops in wood or concrete floors.

These stops have a metal stem and base for strength and durability. Use them to protect walls from doors in high-traffic applications.

Keep sliding doors and panels from damaging walls and door frames.

Made of rubber, this trim resists abrasion better than plastic trim. Often used on panels, boards, signs, and mirrors, it protects edges from impact.

A metal core adds strength and stability, making this trim more durable than standard rubber trim. Made of rubber, it resists abrasion better than plastic trim. Use it to protect the edges of panels, boards, signs, and mirrors from impact.

A metal core adds strength and stability, making this trim more durable than other high-temperature rubber trim. It withstands temperatures up to 400° F, which is generally twice as high as our standard rubber trim. Use it to protect the edges of panels, boards, and signs from impact. Made of rubber, it resists abrasion better than plastic trim.

This trim safeguards equipment from static electricity by diverting electrostatic charges quickly. Made of rubber, it resists abrasion better than plastic trim. Use it to protect the edges of electronics equipment and circuit boards from impact.

The raised bulb adds cushioning to absorb more impact than other surface guards to protect walls and other flat surfaces from impact.

Push these flexible grommets into place to protect wire, cable, and cords by turning rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration.

These flexible grommets withstand temperatures of 450° F or greater, which is approximately twice as high as our standard grommets. Push them into place to protect wire, cable, and cords by turning rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration.

Snap these grommets into place to hold wire, cable, and cords in wet locations and form a seal against dust, debris, and water.

Rated IP68, these grommets form liquid-tight seals around wire, cable, and cords to protect them against dust as well as submersion in a maximum of one meter of water.

Cut the center of these grommets with a utility knife to create custom IDs. The two‐piece design makes it easy to install and seal these grommets around wire, cable, and cords that are already in place. Use them to keep out dust, debris, and moisture.

Made of neoprene rubber, these mounts are oil resistant, so they're good for use under generators, HVAC equipment, electric motors, pumps, and blowers.

A two-piece design makes these mounts easier to install than one-piece mounts.

Specifically designed for light vertical loads, these mounts buckle to protect lightweight equipment such as small fans and pumps from vibration.

Designed for tight spaces such as inside machinery, these mounts fit into a cutout, so they so they have a low top profile.

Connect these mounts to your air supply for vibration and shock isolation in compression load applications.

Limit damage during moderate earthquakes.

The polyurethane base on these mounts resists solvents, gasoline, and oil, while the metal plate sustains heavy loads.

Higher deflection ratings translate to greater vibration and shock isolation than our other vibration-damping leveling mounts.

All-stainless steel construction stands up to water and chemicals and won't rust or corrode.

Bolt these mounts down to keep your equipment stationary.

Higher deflection ratings translate to greater vibration and shock isolation.

Cover the bottom of furniture legs.

Great for use outdoors, these feet are EPDM rubber, which withstands exposure to direct sunlight.

Ribbed bushings are more flexible than our smooth vibration-damping bushings, so they're easier to install.

In addition to having a wider temperature range than our other vibration-damping bushings, these have excellent weather resistance.

In addition to having a wider temperature range than our other vibration-damping washers, these have excellent weather resistance.

An economical choice for applications in corrosive environments that don't require high load capacities, these mounts have a plastic base.

Nickel-plated steel has some corrosion resistance.

Made of 303 stainless steel, these mounts resist corrosion from water and most chemicals.

An economical choice for applications in corrosive environments that don't require high load capacities, these mounts have a plastic base.

Yellow zinc-plated steel is more corrosion resistant than nickel-plated steel.

Black-oxide steel has a dull shine for areas where appearance is a concern.

Made of 303 stainless steel, these metric mounts resist corrosion from water and most chemicals.

Well-suited to damp environments, these mounts have a stainless steel stud and nut for corrosion resistance.

Punch-out holes in the base let you bolt down these metric mounts to keep your equipment stationary.

These dock bumpers absorb shock and prevent damage to docks and vehicles.

These springs handle higher loads than standard fastener-mount compression springs. Secure by inserting a fastener through the hole at the base.

Differently sized mounting holes on either side allow for mounting flexibility.

A quieter, more vibration-resistant alternative to traditional steel die springs, these polyurethane springs resist oxidation, oil, and abrasion in high-load, high-pressure applications.

These fabric-covered rubber springs stretch to up to three times their original length—much farther than traditional extension springs, tie downs, and shock cords.

These shelters are spring loaded, allowing them to retract and flex with trailers to provide a better seal than standard dock door shelters.

Slide these wedges under the door to hold it open.

Step on the spring-operated plunger to hold your door in place; tap on the release lever to free it.

Sunlight, ozone, and water won’t affect these washers.

Made of durable material, these washers resist wear from rubbing and scraping surfaces.

These SBR rubber washers are reinforced with cloth fibers.