These caps have excellent chemical resistance for masking parts during chemical finishing applications such as plating and anodizing.

Made of silicone, these caps withstand temperatures of 450° F for electroplating, paint-baking, and powder-coating applications. All of these flexible caps are tapered to fit a variety of unthreaded and threaded objects.

A vibrant yellow color makes these caps stand out. They are made of flexible rubber that conforms for a snug fit. Pull the tab for easy removal.

Also known as capacitor boots, these caps protect capacitors and wire connections from damage to extend their service life. They also insulate wire terminal connections to help reduce accidental shocks.

These plugs withstand temperatures up to 600° F to protect internally threaded NPT connections from contaminants during electropainting, paint baking, and powder coating applications.

These plugs have excellent chemical resistance for masking parts during chemical finishing applications such as plating and anodizing. Use the smaller end of the plug to pull the larger end into a through hole to form a tight seal.

Also known as mouse tails, these tiny plugs fit through-hole IDs as small as 0.022”, 0.025", or 0.03”.

Often used as laboratory stoppers, these rubber plugs have good impact and abrasion resistance. They’re tapered to fit a range of hole diameters.

The hollow construction allows these plugs to compress for a snug fit in threaded and unthreaded holes of varying diameters. Good for electroplating, paint baking, and powder-coating applications, they withstand temperatures up to 450° F.

Place a plug into an opening and tighten the wing nut—the sides expand to create a seal in holes of varying diameters. Good for paint baking and powder-coating applications, these plugs withstand temperatures up to 450° F.

Made of FDA listed materials, these plugs are suitable for food contact. They're tapered to fit a range of hole diameters.

The wings on these plugs expand against the sides of a hole to form a liquid-tight seal. Pierce the plugs with round wire, cable, or tubing and they function as a grommet to create insulated holes.

Even in temperatures as low as -50° F and as high as 220° F, this conduit stays flexible.

These cable ramps handle heavy pedestrian and equipment traffic.

Lay your cable in the slit on the top so it stays off the floor.

Made from thicker and denser fiberglass than standard spark-resistant sleeving, this sleeving is more abrasion resistant and provides better insulation. The silicone rubber coating protects against sparks and molten metal splash.

A specially formulated silicone rubber coating allows this sleeving to stretch over items during installation; it then tightens around its contents for a secure fit.

Organize and protect the cables on your Universal Robots arm without hindering its movement.

Use this shielded sleeving to protect wire and cable from signal distortion caused by nearby equipment and devices. It has a slit along the entire length so it easily wraps around wire and cable without disconnecting them.

A mica and silicone rubber blend allows this sleeving to withstand temperatures up to 2100° F. It can be quickly applied to hose or cable like tape, so it's a good option for emergency patches.

Resistant to diesel fuel, hydraulic fluid, and lubricating oil, this tubing is often used in vehicles.

Maintain a supply of tubing in a variety of sizes that withstand abrasion, moisture, and chemicals.

Use this wrap with heat-shrink tubing to create a moisture-resistant seal. Apply it like tape around wire and cable, then slide the tubing over the wrap. The wrap melts when tubing is heated and bonds to the underlying surface.

Cut with scissors or a utility knife to cover irregularly shaped electrical hazards.

More flexible and portable than glove boxes, these glove bags are temporary enclosures that protect you while you work with hazardous or unknown material and isolate the material from outside air and moisture.

Shield your robot arm from dirt and damage with these covers.

These flexible grommets withstand temperatures of 450° F or greater, which is approximately twice as high as our standard grommets. Push them into place to protect wire, cable, and cords by turning rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration.

Keep grommets of various sizes on hand to solve whatever problems arise.

Create a sanitary seal on through-wall piping, tubing, and cables in food-, cosmetic-, and pharmaceutical-processing areas.

Apply heat and these grommets shrink around wire, cable, and cords to keep out dust, debris, and moisture.

Cut the center of these grommets with a utility knife to create custom IDs. The two‐piece design makes it easy to install and seal these grommets around wire, cable, and cords that are already in place. Use them to keep out dust, debris, and moisture.

A metal core adds strength and stability, making this trim more durable than standard rubber trim. Made of rubber, it resists abrasion better than plastic trim. Use it to protect the edges of panels, boards, signs, and mirrors from impact.

A metal core adds strength and stability, making this trim more durable than other high-temperature rubber trim. It withstands temperatures up to 400° F, which is generally twice as high as our standard rubber trim. Use it to protect the edges of panels, boards, and signs from impact. Made of rubber, it resists abrasion better than plastic trim.

Guard the edges of panels, signs, glass, and other surfaces in food plants from frequent bumps and scrapes. This trim is FDA compliant, so it’s safe to directly touch food.

Black and yellow stripes create a visual alert to draw attention to equipment and obstructions. Designed to cushion during impact, this foam trim protects edges on posts, shelving, and other surfaces from damage.

Even in the dark, this black and yellow striped trim draws attention to equipment and obstructions. Designed to cushion during impact, it protects edges on posts, shelving, and other surfaces from damage.

Install these bumpers with screws. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces.

These bumpers are at a 90° angle to protect corners on equipment, walls, and docks from damage caused by carts, vehicles, and other moving objects. Install them with screws.

The stem on these bumpers compresses to fit into tight holes. Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.

Twist these bumpers into a threaded hole. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces.

All of these bumpers are reinforced with a steel core for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. Twist them into a threaded hole.

Mount these bumpers on a threaded stud. All are reinforced with a steel core or base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines.

These bumpers withstand temperatures up to 300° F, which is at least twice as high as our other load rated bumpers. Use them in applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, these bumpers absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Mount them on a threaded stud.

Press these bumpers into place with the adhesive backing. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. They're comparable to Bumpon bumpers.

Make bumpers the size and shape you need. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. Press them into place with the adhesive backing.

Install with a few taps of a hammer. In addition to protecting soft materials such as wood, fiberboard, and plastic, these bumpers are commonly used on table and chair legs to safeguard floors.

These thick, rigid bellows provide excellent durability.

Add cuff inserts to these flexible bellows for a custom fit.

Interlock bellows, mounting flanges, and links to create a custom-length bellows. These molded bellows are airtight to keep contaminants out.

Attach the cuff end with a hose clamp, and screw mount the flange end.

Secure the cuff ends with hose clamps.

Install these bellows over gas springs to protect their piston rods.

Protect U-joints to keep lubricants in and contaminants out.

Enclose ball joint linkages to keep lubricants in and contaminants out.

Slide these protectors over gas springs to keep debris out of their seals.

Use these dust caps and plugs to keep contaminants out of your hose line.

Seal unthreaded pipe ends with these plugs. They come with a band that clamps over the outside wall of your pipe and tightens with a screwdriver.

Twist the wing nut on these plugs to expand the seal.

Tighten the nut on these plugs to expand the seal.

Use the bypass tube on these plugs to add air, water, and other fluid to your pipeline or to relieve pressure while testing.

These extra-long plugs allow you to seal off two pipes at the same time. They have two separate inflation chambers to release back pressure gradually and prevent splash back as water clears the drain line.

Use the bypass tube on these plugs to add air, water, and other fluid to your pipeline or to relieve back pressure while testing.

These plugs are designed for metal and rigid plastic tubing.

These valves are made of corrosion-resistant materials for use in wet conditions and harsh environments.

Nonstandard-size containers are no problem—use the hook-and-loop closure to adjust these heaters to fit a range of diameters.

A magnetic pad holds fasteners and small metal parts on the back of your hand while you work. The palm of these gloves has a textured polyurethane coating that provides extra grip, yet is thin enough for assembly work, small parts handling, and operating touch-screen devices.

Operate touch-screen devices without removing your gloves. A coating on the palm adds wear and abrasion resistance.

Use these gloves to avoid damaging static-sensitive electronic parts.