Light up work without risking an explosion. NEC rated, these headlamps are safe to use in areas with ignitable concentrations of flammable or combustible gases, vapors, and liquids. Swap the elastic strap with the included rubber strap to wear them around a hard hat—no clips required. To attach them to a welding helmet, use the included snap-together fastener. IP rated, you can drop them in water and they’ll still work. These headlamps are tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Intrinsically safe headlamps cannot cause an explosion, so they're a better choice where hazardous material is present in normal operating conditions.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

Drop these headlamps in water and they’ll still work—they’re IP rated to withstand submersion for at least 30 minutes. Use them to shine light on your work while keeping your hands free. All can cast either a spot beam with a bright center for long distances, or a uniform flood beam for close-up tasks and inspection work. These headlamps are tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Styles A and B can be used as a flashlight—just snap them out of the strap. Wrap them around a hard hat with their rubber-coated elastic strap, or attach them with the included clips. The strap is reflective, so drivers will see you. These headlamps have a battery life indicator to let you know when to recharge. If you need these headlamps to work right away and can’t wait for them to charge, you can use disposable batteries instead of their rechargeable one. Style A works with two CR123 batteries. Style B works with three AAA batteries.

Style C fit on a welding helmet or hard hat without weighing down the front of your head. The battery pack is in the back to balance the weight. You can also hang the pack off your belt by adding the included extension cable. To connect these headlamps to a welding helmet, use the included snap-together fasteners. To wrap around a hard hat, attach the rubber strap—no clips required. A battery life indicator lets you know when to recharge.

Style D run on disposable alkaline batteries, but you can swap them out with lithium batteries to get brighter light in cold conditions. A lockout feature stops them from getting turned on by accident. Snap them onto a welding helmet with the included fasteners. They’ll also fit around a hard hat with no need for clips—just use the included rubber strap.

On headlamps with color options, the green beam shows more contrast than the red beam, but it can interfere with your ability to see in dark conditions. The red beam lets you see in low light without disrupting your night vision.

IP68-rated headlamps can be submerged in water for more than 30 minutes. They’re also sealed against dust.

Clip these headlamps right into a mount on your tactical or rescue helmet. You can also clip them onto your gear’s MOLLE strap. These headlamps all have multiple LED color options for different scenarios. Use the red or blue beam in low-light environments to preserve your night vision. The blue beam lets you see more details and color differences than the red beam—you can even read. The green beam shows more contrast than red and blue beams, but it can interfere with your ability to see in dark conditions. Meeting ANSI/Plato F1, these lights have been tested for light output, impact resistance, and run time.

Style C project light the farthest of these headlamps. Tilt them up to 90° to point light where you need it. To view clear images through night-vision goggles in dim light or pitch black, switch them to infrared light. A digital lockout option keeps the beam from turning on accidentally. IP07-rated for temporary submersion, they’ll keep working if you drop them in water. These headlamps are compatible with NVG mounts and include a strap if you want to wear them without a helmet.

Light up work while staying visible in high-risk areas. These headlamps have LEDs on the head band so forklift and truck drivers can see you. You can set the lights to shine steady or flash. These headlamps are tested against ANSI/Plato FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Styles A and B have lights all around the head band for 360° visibility. You can turn the front and band light on separately or simultaneously. Battery life is measured when all lights are on. They include a rubber strap you can wrap around a hard hat—no hard hat clips required. These headlamps are rated for temporary submersion in water.

Style A have a memory function that defaults to your preferred light combination when you first turn them on.

Style B headlamps will last a full shift. Quickly swap out their disposable batteries—no need to wait for a charge. Their reflective band keeps you visible to vehicles even when the light is turned off.

Style C are a lower cost alternative that has a red light in back so people can see you when it is dark. However, they don’t have lights all around the head band. The front light has a dial to dim the light anywhere from high to low for precise lighting control. They are a good choice for wearing on your head rather than on a hard hat. Rated IP54, they’re sealed against dust and splashing water.

Headlamps with a spot beam have a bright center for lighting up long distances. Headlamps with a flood beam cast a uniform spread of light that’s good for close-up tasks and inspection work.

On headlamps with color options, the red beam lets you see in low light without disrupting your night vision. The green beam shows more contrast than the red beam, but it can interfere with your ability to see in dark conditions.

Brighten things in your periphery without having to turn your head. These headlamps cast a beam that’s two to three times wider than traditional headlamps. Rated IP05, they’re sealed to resist splashes and dripping water. Use the included clips to secure the elastic strap to your hard hat.

Style B have a separate spotlight, so you can see farther away.

Hang these lights above your workspace—they shine through long tubes to distribute even light with minimal glare and shadows. Carry them where you need them and suspend them from pipes, beams, and other overhead surfaces. A plastic lens keeps drops and dings from breaking the lights.

Style A and C hang from included hooks at each end.

Lights with an SJO cord resist oil.

Light up damp areas—these lights seal out moisture and humidity. They’ll even work in areas with frequent washdowns. Rated NEMA 4X, they withstand spraying liquid, resist corrosion, and keep out dust. Use them with medium-base, screw-in CFL (compact fluorescent), halogen, incandescent, and LED bulbs (sold separately).

Tempered glass lenses are more durable than plastic lenses. They have a zinc-plated steel guard to protect them.