Loosen fine particles from the grip of vibrating-sifter screens with the bounce of rubber balls. Also use them as seals in pumps and check valves. They’re made from FDA-listed materials for use with food and beverage.

Greater strength than standard High-Temperature Silicone translates into better shock-absorbing qualities and longer life.

These platinum-cured silicone rubber sheets and strips meet the strict purity standards of USP Class VI.

FDA compliant for use with food and beverage, these rods fit into channels and other narrow spaces for sealing and cushioning.

Use these balls as seals in pumps and check valves, or let them bounce inside of vibrating sifters as an effective screen cleaner.

These natural rubber sheets and strips will stretch up to six times their length. Use them in dynamic applications, such as vibration isolators and shock mounts.

Safely use these balls in food and pharmaceutical environments to clean screens in vibrating sifters or to act as a seal in pumps and check valves.

Made from FDA-compliant materials for use with food and beverage, these sheets and strips won’t degrade from animal and vegetable oils.

Greater tensile strength than standard Food-Grade Oil-Resistant Buna-N rubber gives these sheets and strips better shock-absorbing qualities and longer life. They’re made from FDA-listed materials for use with food and beverage and offer good resistance to animal and vegetable oils.

Press these flexible grommets into holes and their tapered inner wall will expand when pipe or tubing is inserted to hold them snugly in place. They're often used for routing applications on metal, plastic, and fiberglass tanks.

Guard the edges of panels, signs, glass, and other surfaces in food plants from frequent bumps and scrapes. This trim is FDA compliant, so it’s safe to directly touch food.

These silicone foam cords meet NSF/ANSI 51 for food equipment materials. Use them to seal and cushion narrow spaces in food service equipment.

In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.

In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.

In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.

Also known as Tivar H.O.T., this material lasts up to 10 times longer in high-temperature applications than standard UHMW.

Often used in high-speed, high-precision, and high-impact applications, such as conveyor rollers and bearings, these rods stand up to scratches and scuffs better than our standard UHMW polyethylene rods. Also known as Tivar HPV.

If a chip of this material breaks off, it can be located by metal detectors to reduce contamination risks.

Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.

This cast nylon 6 material is easier to machine than other types of nylon. It’s comparable to Nylatron and Nycast.

This cast nylon 6 material is easier to machine than other types of nylon. It’s comparable to Nylatron and Nycast.

Practically nonabsorbent, HDPE won't swell when exposed to moisture. It is denser and more rigid than LDPE, plus it's more chemical resistant.

Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

An economical alternative to Delrin® acetal resin, this acetal copolymer offers similar wear resistance.

An economical alternative to Delrin® acetal resin, this acetal copolymer offers similar wear resistance.

A layer of soft LDPE is sandwiched between two thin layers of aluminum for strength and rigidity.

Because this polypropylene resists swelling when exposed to water, it’s often fabricated into containers and parts for laboratory equipment.

Because this polypropylene resists swelling when exposed to water, it’s often fabricated into containers and parts for laboratory equipment.

Polycarbonate maintains good impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.

Often fabricated into signs, packaging, and light duty housings, polystyrene is easy to thermoform.

Known for its electrical insulating properties, this polystyrene is often used for cable connectors, electrical housings, and in microwave applications. It is also known as Rexolite.

Polyester resists swelling in wet environments.

These black polyester sheets protect from UV rays better than off-white polyester. Strong and semi-rigid, they won't swell in moist environments, so they're often made into pump components and spacers.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

Manufactured from Rulon PTFE, a PTFE that's modified with filler material for a super-slippery, impact-resistant surface that resists wear.

Not only does PEEK provide superior wear resistance in repetitive processes, it is also resists wear caused by abrasion. PEEK can be used as a lightweight substitute for metal parts in chemical-processing applications.

Not only does PEEK provide superior wear resistance in repetitive processes, it is also resists wear caused by abrasion. PEEK can be used as a lightweight substitute for metal parts in chemical-processing applications.

Common in food and pharmaceutical plants, these PEEK sheets and bars help you identify contaminated batches.

Often used for circuit-breaker housings, manifolds, and semiconductor components, Ultem PEI offers excellent electrical-insulating properties.

Often used for circuit-breaker housings, manifolds, and semiconductor components, Ultem PEI offers excellent electrical-insulating properties.

Just as chemical resistant as PTFE, yet FEP offers greater impact strength. Use it to make valve components and gaskets.

Widely used to make parts that require autoclaving, polysulfone is a hard, rigid material that’s easy to machine and thermoform. It maintains its physical properties when heated, even when exposed to steam.

Stronger than PTFE, PVDF offers good chemical resistance. Comparable to Kynar and Solef, it’s widely used for pump parts, tank liners, and seals.

Stronger than PTFE, PVDF offers good chemical resistance. Comparable to Kynar and Solef, it’s widely used for pump parts, tank liners, and seals.

When excellent chemical resistance is combined with an ability to hold tight tolerances, the result is PPS—a material that’s widely machined into parts for chemical-processing applications. It is comparable to Techtron and Ryton.

Cast acrylic is easier to machine than extruded acrylic. It's comparable to Lucite and Plexiglas® Acrylic.

At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.

At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.

Because PVC resists acids and alkalies, it is often used in tanks and chemical-processing applications where visibility is essential.

PETG can be formed into complex shapes without sacrificing durability.

These Buna-N O-rings are made of FDA-listed material for use with food and beverage.

Softer than standard Viton® fluoroelastomer O-rings, these offer a better seal in low-pressure applications.

Made and bagged in an ISO Class 7 and Fed. Spec. Class 10,000 clean room.

Made of Kalrez 6230, these O-rings are for use when high purity is essential, such as with food and semiconductors.

If these O-rings deteriorate, they can be picked up by metal detection systems.

Made and bagged in an ISO Class 7 (Fed. Std. Class 10,000) clean room, these are the highest purity high-temperature O-rings we offer.

If these O-rings deteriorate, they can be picked up by metal detection systems.

Use these O-rings with metric sanitary fittings, which are also called aseptic fittings. Made of EPDM, they resist water, steam, ethanol, and ethylene glycol.

This cord stock is made of FDA-listed material for use with food and beverage. It resists citric acid, diluted salt solutions, glycerin, and sodium bicarbonate.

Made of FDA-listed material for use with food and beverage.