Provide an end point for a belt barrier.

Shield your robot arm from dirt and damage with these covers.

Vibrant colors create a visual alert to draw attention to equipment and obstructions. These guards protect corners on walls, posts, shelving, and other surfaces from damage.

With a raised bulb to absorb greater impact than standard corner guards, these guards protect walls, cabinets, and other surfaces.

Vibrant colors create a visual alert to draw attention to equipment and obstructions. These guards protect walls and other flat surfaces from impact.

Black and yellow stripes create a visual alert to draw attention to equipment and obstructions. Designed to cushion during impact, this foam trim protects edges on posts, shelving, and other surfaces from damage.

Even in the dark, this black and yellow striped trim draws attention to equipment and obstructions. Designed to cushion during impact, it protects edges on posts, shelving, and other surfaces from damage.

A metal core adds strength and stability, making this trim more durable than standard rubber trim. Made of rubber, it resists abrasion better than plastic trim. Use it to protect the edges of panels, boards, signs, and mirrors from impact.

A metal core adds strength and stability, making this trim more durable than other high-temperature rubber trim. It withstands temperatures up to 400° F, which is generally twice as high as our standard rubber trim. Use it to protect the edges of panels, boards, and signs from impact. Made of rubber, it resists abrasion better than plastic trim.

Guard the edges of panels, signs, glass, and other surfaces in food plants from frequent bumps and scrapes. This trim is FDA compliant, so it’s safe to directly touch food.

These bumpers are at a 90° angle to protect corners on equipment, walls, and docks from damage caused by carts, vehicles, and other moving objects. Install them with screws.

These nonslip bumpers protect equipment while minimizing the movement of objects that come in contact, making them good for positioning and robotic-gripping applications. Install them with adhesives or screws.

Make bumpers the size and shape you need. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. Press them into place with the adhesive backing.

Select these bumpers for applications that require specific load capacities. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. Press them into place with the adhesive backing. They're comparable to Bumpon bumpers.

Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.

Mount these bumpers on a threaded stud. All are reinforced with a steel core or base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines.

Select these bumpers for applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Mount these bumpers on a threaded stud.

Select these bumpers for applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Twist these bumpers into a threaded hole.

All of these bumpers are reinforced with a steel core for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. Twist them into a threaded hole.

A magnetic base makes it easy to attach, move, and replace these bumpers on metal surfaces. Use them for guarding, aligning, and positioning parts.

Remove the pin on your door's hinge, slide it through one of these stops, and then insert it back into the hinge to set and adjust the door's opening angle.

Designed to mount at the point of contact between a door handle and the wall, these stops prevent handles from damaging walls when doors swing open.

Simply screw these bumpers into baseboards with the attached self-tapping wood screw to prevent doors from damaging walls.

The half-dome shape won't catch mops and scrubbers. Install these stops in wood or concrete floors.

Press these silencers into a drilled hole in the door frame. Doors close firmly yet quietly with these silencers. They also eliminate the rattling of doors against their frames.

Push these flexible grommets into place to protect wire, cable, and cords by turning rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration.

Cut the thin layer of rubber in the center of these grommets to create custom IDs to securely hold and protect wire, cable, and cords. Push these grommets into place. They turn rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration. Also known as webbed grommets.

Create a tight seal around wire, cable, and cords with these grommets to keep out dust, debris, and moisture.

The two‐piece design makes it easy to install and seal these grommets around wire, cable, and cords that are already in place. Use them to keep out dust, debris, and moisture.

Snap these grommets into place to hold wire, cable, and cords in wet locations and form a seal against dust, debris, and water.

Seal T-slots, rail ends, and gaps between rails to keep out dust, debris, and other contaminants.

Provide a stable, nonmarring base for strut channel legs.

Mount brushes by inserting them into a holder. Holders can be cut with scissors.

Multiple layers of shock-absorbing rubber make these bumpers more chip and abrasion resistant than standard dock bumpers.

Slide these feet on ladder legs to add slip resistance.

These pads take up less space than creepers for use under extra-low-clearance equipment.

Designed for intermittent handling of hot pipes, engine parts, and castings, these gloves protect your hands from moderate heat and some abrasion.

Use these pads to protect your hands from intermittent exposure to direct heat when handling hot items.

Handle small items when dexterity is essential and full hand coverage isn't needed. These single-use cots cover fingers without restricting hand movement.

Boots extend above the ankle to provide more coverage than shoes. They protect your feet against workplace hazards, such as accidental impacts, water, and oil.

Keep feet warm and dry in frigid temperatures with these insulated boots.

Wear over mid-calf and knee-high boots. They protect boots from water, wear, and abrasion.

Taller than shoe covers, boot covers protect mid-calf and knee-high boots. They are lightweight and protect boots from dirt, grime, and liquid splashes.

These covers are rated ASTM F2413 for protection against electrical hazards.

Limit wrist movement and maintain a safe, neutral position.

The large domed head extends beyond the diameter of your pipe, rod, or tubing for added protection.

Good for electroplating, paint baking, and powder-coating applications, these caps withstand temperatures up to 440° F or 570° F.

A vibrant yellow color makes these caps stand out. They are made of flexible rubber that conforms for a snug fit. Pull the tab for easy removal.

Place a plug into an opening and tighten the wing nut—the sides expand to create a seal in holes of varying diameters.

These plugs have excellent chemical resistance for masking parts during chemical finishing applications such as plating and anodizing. Their tapered design fits a range of hole diameters.

Place a plug into an opening and tighten the wing nut—the sides expand to create a seal in holes of varying diameters. Good for paint baking and powder-coating applications, these plugs withstand temperatures up to 450° F.

Made of FDA listed materials, these plugs are suitable for food contact. They're tapered to fit a range of hole diameters.

Designed with a flange, these plugs protect countersunk holes during anodizing, electroplating, paint baking, and powder-coating applications. All withstand temperatures up to 600° F. Use the smaller end of the plug to pull the larger end into a through hole to form a tight seal.

These plugs have excellent chemical resistance for masking parts during chemical finishing applications such as plating and anodizing. Use the smaller end of the plug to pull the larger end into a through hole to form a tight seal.

Good for electroplating, paint baking, and powder-coating applications, these plugs withstand temperatures up to 600° F. To form a tight seal, use the smaller end of the plug to pull the larger end into a through hole.

Push these plugs into place for a finished appearance on both sides of a panel.

No need to drill mounting holes, this weatherstripping has a peel-and-stick adhesive backing.

Mount this weatherstripping to the sides and top of a door frame to seal gaps.

Also known as door sweeps, this weatherstripping closes the gap between the bottom of the door and the floor.

In addition to mounting to the door's face, this weatherstripping fits into cutouts (mortises) to mount flush with the door.

Seal the space between your double doors.

These shelters are spring loaded, allowing them to retract and flex with trailers to provide a better seal than standard dock door shelters.

The open top allows these foam U-channels to slide over and cushion an edge.

FDA compliant and NSF/ANSI 51 certified, these 90° angles are approved for direct contact with food.

With nearly twice the tensile strength of standard high-temperature silicone, these 90° angles absorb shock better and last longer.

More compressible than seals with a solid bulb, these seals have a hollow bulb.

These seals have an EPDM foam rubber bulb.

In addition to oil, these seals resist grease, salts, water, steam, and most detergents.

These seals have an EPDM foam rubber wiper, which is softer and more flexible than EPDM rubber wipers.

Made of silicone rubber, these seals can handle temperatures up to 500° F, plus they resist water and salts.

Push these T-seals into grooves and channels to block out moisture, dust, and debris.