We will reply to your message within an hour.
A silicone additive gives this material a self-lubricating surface that reduces friction and extends the life of your parts.
Stronger than natural rubber, these polyurethane rods combine the shock-absorbing qualities of rubber with the tear resistance of plastic. Use them to seal narrow spaces such as channels.
The thin profile seals narrow spaces such as channels and seams. Natural rubber will stretch up to six times its length.
Use these tubes as jackets, seals, and insulation in areas where rubbing and scraping could cause wear on rubber. They are made of polyurethane, which combines the shock-absorbing qualities of rubber with the tear resistance of plastic.
Use these polyurethane balls as seals in pumps and check valves or let them bounce inside of vibrating sifters for an effective screen cleaner. They are made of polyurethane, which combines the shock absorbing qualities of rubber with the strength of plastic.
Safely use these balls in food and pharmaceutical environments to clean screens in vibrating sifters or to act as a seal in pumps and check valves.
FDA compliant for direct contact with food, these balls are often used to clean screens in vibrating sifters in food, beverage, and other sanitary environments. You can also use them as seals in pumps and check valves.
Jackets, seals, and insulation are just a few of the many uses for rubber tubes.
The cylindrical shape fits into channels and other narrow spaces for sealing and cushioning.
Let these balls bounce inside of vibrating sifters for an effective screen cleaner or use them as seals in pumps and check valves.
Loosen fine particles from the grip of vibrating-sifter screens with the bounce of rubber balls. Also use them as seals in pumps and check valves. They’re made from FDA-listed materials for use with food and beverage.
FDA compliant for use with food and beverage, these rods fit into channels and other narrow spaces for sealing and cushioning.
Seal and cushion narrow spaces such as channels.
Meeting UL 94 V-0, these rods are flame retardant—use them to seal and cushion narrow spaces.
Stronger than standard high-temperature silicone rods, these rods are longer lasting and more shock absorbent.
These tubes are often used as jackets, seals, and insulation in hot environments.
Use these balls as seals in pumps and check valves, or let them bounce inside of vibrating sifters as an effective screen cleaner.
Use these small-diameter rods to seal narrow spaces.
These small-diameter rods provide a seal in narrow spaces.
Clean screens in vibrating sifters with the bounce of these balls, or use them as seals in pumps and check valves.
Seal and cushion narrow spaces, such as inside channels and seams.
Applications for these tubes include jackets, seals, and insulation.
Use these balls as seals in pumps and check valves or let them bounce inside of vibrating sifters for an effective screen cleaner.
Used to seal narrow spaces such as channels, these tubes offer more compression than solid EPDM rods.
Seal channels and other narrow spaces with these Santoprene rods.
Resistant to sunlight, ozone, and water, these rods are sized to seal narrow spaces such as channels.
Use this tubing in high-temperature applications up to 390° F.
Stretch it, bend it, compress it – this tubing will spring back to its original shape.
Thick walls give this tubing excellent abrasion resistance.
The lightweight, spongy walls provide thermal insulation, so the tubing won’t produce condensation when cold air or fluid runs through it.
This tubing won’t degrade when exposed to the damaging effects of UV light.
This self-extinguishing tubing meets UL 94 V-0 and UL 94 V-1 for flame retardance, so it delays the spread of flames to valuable equipment.
Protect sensitive equipment with this tubing—it is specially formulated to reduce the buildup of static electricity.
Multiple colors allow you to color-code your line for easy identification.
A braid reinforcement gives this tubing excellent strength in high-pressure applications up to 250 psi.
This multiple-line tubing holds together on its own, so there's no need for cable ties or tape.
With excellent resistance to abrasion and tearing, this tubing can hold up in rugged environments.
Static electricity will not build up in this tubing, so you can use it near sensitive equipment.
Keep your work site safe and clutter free–this coiled tubing extends when you need it and retracts out of the way when you don't.
Designed for use in welding applications, this tubing has multiple layers of material and is specially formulated to self-extinguish.
Commonly used in applications requiring movement, such as metering (peristaltic) pumps and robotics, this tubing can handle continuous bending and flexing.
With a diameter of 2" or larger, this tubing has the girth to handle high volumes of acids and other harsh substances.
Use this resilient tubing in high-temperature chemical applications up to 400° F.
Made of highly chemical-resistant materials, this tubing withstands harsh chemicals such as hydrochloric acid, sodium hydroxide, and sulfuric acid.
This tubing can withstand high-temperature chemical applications up to 400° F.
An internal reinforcement gives this tubing the strength to handle high-pressure applications up to 350 psi.
With a diameter of 2" or larger, this tubing has the girth to handle high-volume beverage and bulk food processing applications.
Not only can this tubing handle the highest temperatures of all our soft tubing for food, beverage, and dairy, it also has superior abrasion and crush resistance. Use in applications up to 450° F.
Silicone with a metal additive, this tubing routes liquids and ingredients as hot as 390° F through your food plant and is caught by metal detectors if a piece falls into your line.
Silver ions are blended into the walls of this tubing to inhibit the growth of odor-causing microbes.
Move high volumes of dry bulk food, powders, and pellets around your food processing plant while reducing the risk of contaminating the food.
Hot food and beverage applications won’t harm this tubing—it can handle temperatures up to 390° F.
Typically used in applications requiring movement, such as metering (peristaltic) pumps and robotics, this tubing can handle repeated bending and flexing.
Conductive material embedded in the walls, along with a metal strip, lets this tubing divert static buildup away from sensitive equipment when conveying dry materials such as flour, salt, and sugar. Tubing has a diameter of 4" or larger to handle bulk food processing applications.
Lighter than other plastic and rubber tubing, but extremely tough, this tubing stands up to the wear and tear of daily use.
Sized for vibrating sifters, screeners, hoppers, and packaging equipment, this tubing has a diameter of 4" or larger to handle a variety of bulk food processing applications.
Tough and durable, this tubing resists abrasion and tearing.
This tubing can handle continuous bending and flexing in applications requiring movement, such as metering (peristaltic) pumps and robotics.
Not only is this tubing cured with platinum and free of plasticizers like DEHP, it can handle higher temperatures than any of our other high-purity tubing. Use in applications up to 450° F.
With the best oil resistance of all our fuel and lubricant tubing, this tubing won’t deteriorate or become brittle when exposed to oil—even with long-term use.
This tubing can handle the highest temperatures of all of our fuel and lubricant tubing. Use it in applications up to 450° F.
This tubing is soft enough to handle continuous bending and flexing, yet tough enough to resist tearing and abrasion.
Tubing meets NSF/ANSI Standard 61 for drinking water.
Install these bumpers with screws. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces.
All of these bumpers are reinforced with an embedded washer or base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. Install them with screws.
Select these bumpers for applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Twist these bumpers into a threaded hole.
All of these bumpers are reinforced with a steel core for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. Twist them into a threaded hole.
These bumpers withstand temperatures up to 300° F, which is twice as high as our other load rated bumpers. Use them in applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, these bumpers absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Twist them into a threaded hole.
Twist these bumpers into a threaded hole. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces.
The stem on these bumpers compresses to fit into tight holes. Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.
Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.
A ridge on the stem provides a tighter grip than other push-in bumpers. Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.
Keep bumpers of various shapes, materials, and mounting styles on hand to solve whatever problems arise.
Press these bumpers into place with the adhesive backing. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. They're comparable to Bumpon bumpers.
Select these bumpers for applications that require specific load capacities. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. Press them into place with the adhesive backing. They're comparable to Bumpon bumpers.
Mount these bumpers on a threaded stud. All are reinforced with a steel core or base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines.
Select these bumpers for applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Mount these bumpers on a threaded stud.
These bumpers withstand temperatures up to 300° F, which is at least twice as high as our other load rated bumpers. Use them in applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, these bumpers absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Mount them on a threaded stud.
Install with a few taps of a hammer. In addition to protecting soft materials such as wood, fiberboard, and plastic, these bumpers are commonly used on table and chair legs to safeguard floors.
A magnetic base makes it easy to attach, move, and replace these bumpers on metal surfaces. Use them for guarding, aligning, and positioning parts.
With a split design, you can easily place these bumpers on tubing, rods, machinery legs, control shafts, and levers to protect them from impact, dents, and scratches. Use the concealed screw to secure them in place.
These neoprene foam cords stand up to water, sunlight, and oxidation, plus they resist swelling when they come into contact with oil.
Made of EPDM, this foam has the best resistance to water, sunlight, and oxidation of all the foam we offer.
An economical alternative to neoprene foam, these Santoprene foam cords stand up to water, sunlight, and oxidation but lack oil resistance.
Neoprene is blended with EPDM and polyethylene for foam tubes that offer good resistance to water, sunlight, and oxidation.
These EPDM foam tubes have the best resistance to water, sunlight, and oxidation of all the foam tubes we offer.
Use these foam half rounds as a cushioning bumper.
Use these flexible polyurethane foam cords and circles to cushion narrow spaces, such as channels and gaps.
These silicone foam cords meet NSF/ANSI 51 for food equipment materials. Use them to seal and cushion narrow spaces in food service equipment.
Seal and cushion narrow spaces in hot environments with these silicone foam cords.
Seal and damp vibration in high-temperature equipment with these rings.
Provide support for sealants in gaps—insert these backer rods into gaps and fill in with sealant.