The cylindrical shape fits into channels and other narrow spaces for sealing and cushioning.

Let these balls bounce inside of vibrating sifters for an effective screen cleaner or use them as seals in pumps and check valves.

Stronger than natural rubber, these polyurethane rods combine the shock-absorbing qualities of rubber with the tear resistance of plastic. Use them to seal narrow spaces such as channels.

Use these tubes as jackets, seals, and insulation in areas where rubbing and scraping could cause wear on rubber. They are made of polyurethane, which combines the shock-absorbing qualities of rubber with the tear resistance of plastic.

FDA compliant for direct contact with food, these balls are often used to clean screens in vibrating sifters in food, beverage, and other sanitary environments. You can also use them as seals in pumps and check valves.

FDA compliant for use with food and beverage, these rods fit into channels and other narrow spaces for sealing and cushioning.

Stronger than standard high-temperature silicone rods, these rods are longer lasting and more shock absorbent.

These tubes are often used as jackets, seals, and insulation in hot environments.

Used to seal narrow spaces such as channels, these tubes offer more compression than solid EPDM rods.

Seal channels and other narrow spaces with these Santoprene rods.

Applications for these tubes include jackets, seals, and insulation.

Use these small-diameter rods to seal narrow spaces.

These neoprene foam cords stand up to water, sunlight, and oxidation, plus they resist swelling when they come into contact with oil.

An economical alternative to neoprene foam, these Santoprene foam cords stand up to water, sunlight, and oxidation but lack oil resistance.

Seal and damp vibration in high-temperature equipment with these rings.

Seal and cushion narrow spaces in hot environments with these silicone foam cords.

Use these flexible polyurethane foam cords and circles to cushion narrow spaces, such as channels and gaps.

These compressible Buna-N rubber gaskets ensure a tight seal. They also resist water and salts.

Furnished with enough nuts and bolts to create a connection between two steel pipe flanges.

These neoprene gaskets also resist salts.

Aramid fibers and SBR rubber are blended for resistance to water, inert gases, and abrasion.

These blended carbon/Buna-N rubber gaskets are unaffected by oil and temperatures up to 650° F.

When working with water and steam, these gaskets ensure a tight seal.

These gaskets have a perforated plate to filter, separate, and strain liquids or dry materials in your line.

In addition to oil, these Buna-N gaskets resist water and salts.

Made from PTFE with an EPDM core, these gaskets have added resiliency resulting in a longer product life.

Resistant to fuel, oil, and acid condensates, these gaskets are made of fluoroelastomer.

If a piece wears off, fragments as small as 1 mm can be picked up by a metal-detection system to prevent contamination of your process line.

These gaskets meet Fed. Std. Class 10,000 and ISO Class 7 clean room requirements.

These gaskets meet Fed. Std. Class 10,000 and ISO Class 7 clean room requirements.

In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.

This material suppresses static charges to prevent dust from building up.

This oil-filled material is self-lubricating for an extra-slippery surface.

Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.

Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.

With glass reinforcement, this nylon 6/6 material is stronger than standard nylon, plus it can withstand higher temperatures. It’s widely used in high-stress applications, such as caster wheels and automotive parts.

Designed for extreme wear resistance, this Kevlar-filled nylon 6/6 material lasts up to 20 times longer than unfilled nylon. Also known as Hydlar Z, it is often used for parts that are continuously exposed to wear and abrasion, such as wear strips and bushings.

The addition of MDS results in a nylon with exceptional wear resistance as well as self-lubricating properties.

This cast nylon 6 material is easier to machine than other types of nylon. It’s comparable to Nylatron and Nycast.

A good choice for making sprockets and pulleys, these cast nylon 6 tubes withstand higher temperatures and are easier to machine than standard nylon 6/6 tubes.

This nylon stays lubricated over time because it’s filled with oil. Use it to fabricate parts for hard-to-reach places where adding lubricants would be difficult.

Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

The addition of PTFE provides a more slippery, wear-resistant surface than standard Delrin® acetal resin. It’s commonly fabricated into pump components, gears, and bearings.

A glass-fiber filler gives this material increased rigidity over standard Delrin® acetal resin. Use it to machine manifolds, impellers, and other parts that require rigidity.

An economical alternative to Delrin® acetal resin, this acetal copolymer offers similar wear resistance.

This material prevents the buildup of static charges.

Practically nonabsorbent, HDPE won't swell when exposed to moisture. It is denser and more rigid than LDPE, plus it's more chemical resistant.

Because ABS maintains its toughness even after thermoforming, it’s often made into storage cases, tote trays, equipment housings, and protective gear.

Because this polypropylene resists swelling when exposed to water, it’s often fabricated into containers and parts for laboratory equipment.

Because PVC resists many acids and alkalies, it’s widely used for tanks and in chemical-processing applications. Also known as PVC Type 1.

CPVC is just as chemical resistant as standard PVC Type 1 and can handle hotter temperatures up to 200° F.

Offering greater impact resistance than standard PVC Type 1 with similar chemical resistance, this PVC Type 2 is widely used for parts that are subject to shock.

The addition of glass fibers to this polycarbonate increases tensile strength for use in structural applications.

Use Noryl PPO for electrical insulating applications where moisture is a concern. It remains dimensionally stable over time, even when temperatures fluctuate.

Known for its electrical insulating properties, this polystyrene is often used for cable connectors, electrical housings, and in microwave applications. It is also known as Rexolite.

When moisture-resistant polyester is combined with PTFE, the result is this self-lubricating material. It’s also called Hydex and PBT.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

Also called reprocessed and mechanical-grade PTFE, this material is an economical alternative to standard PTFE.

This glass-filled PTFE is more rigid than standard PTFE for increased durability in high-stress applications.

Not only does PEEK provide superior wear resistance in repetitive processes, it is also resists wear caused by abrasion. PEEK can be used as a lightweight substitute for metal parts in chemical-processing applications.

Often used in food and pharmaceutical plants, these PEEK rods help you prevent contaminated products from leaving your facility.

Among the strongest plastic materials we offer, Torlon PAI has a slippery surface that resists wear. Use it to make high-friction compressor parts, bearings, and seals.

Often used for circuit-breaker housings, manifolds, and semiconductor components, Ultem PEI offers excellent electrical-insulating properties.

Stronger and more rigid than Torlon 4301 and 4203 because they’re filled with glass, these Torlon 5030 rods are also electrical insulators like Torlon 4203.

Widely used to make parts that require autoclaving, polysulfone is a hard, rigid material that’s easy to machine and thermoform. It maintains its physical properties when heated, even when exposed to steam.

Use PFA in place of PTFE and FEP for durability in repetitive processes, such as pump parts. It is chemical resistant across a wide temperature range.

Offering excellent resistance to shock, PPSU is frequently fabricated into vehicle parts and machine components that are subject to vibration. It withstands higher temperatures than polysulfone and can handle repeated autoclaving cycles.

At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.

At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.

Cast acrylic is easier to machine than extruded acrylic. It's comparable to Lucite and Plexiglas® Acrylic.

This extruded acrylic offers similar performance as cast acrylic at a lower cost.

This extruded acrylic offers similar performance as cast acrylic at a lower cost.

PETG can be formed into complex shapes without sacrificing durability.