This oil-filled material is self-lubricating for an extra-slippery surface.

Practically nonabsorbent, HDPE won't swell when exposed to moisture. It is denser and more rigid than LDPE, plus it's more chemical resistant.

Because PVC resists many acids and alkalies, it’s widely used for tanks and in chemical-processing applications. Also known as PVC Type 1.

Because PVC resists many acids and alkalies, it’s widely used for tanks and in chemical-processing applications. Also known as PVC Type 1.

Widely used for vehicle interiors and equipment housings, this blended material maintains its physical properties after thermoforming. It is comparable to Kydex.

CPVC is just as chemical resistant as standard PVC Type 1 and can handle hotter temperatures up to 200° F.

Offering greater impact resistance than standard PVC Type 1 with similar chemical resistance, this PVC Type 2 is widely used for parts that are subject to shock.

This nylon 6/6 material is modified with MDS for a self-lubricating surface that’s more slippery than standard nylon. It's often used in high-friction applications, such as gears and bearings.

Cast acrylic is easier to machine than extruded acrylic. It's comparable to Lucite and Plexiglas® Acrylic.

At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.

These sheets are stronger than our other plastic perforated sheets for greater impact and abrasion resistance.

This multiple-line tubing holds together on its own, so there's no need for cable ties or tape.

Also known as air brake tubing, this tubing meets D.O.T. FMVSS 106 or D.O.T. FMVSS 49 specifications for testing and performance requirements in motor vehicle brake systems.

All of these bumpers are reinforced with an embedded washer or base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. Install them with screws.

Press these bumpers into place with the adhesive backing. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. They're comparable to Bumpon bumpers.

Simply adhere these silencers to the door frame—no need for an installation hole. Doors close firmly yet quietly with these silencers. They also eliminate the rattling of doors against their frames.

Made of rubber, this trim resists abrasion better than plastic trim. Often used on panels, boards, signs, and mirrors, it protects edges from impact.

Designed to withstand temperatures up to 800° F, this stainless steel trim is good for use with ovens, boilers, and heat shields. It combines strength with flexibility to hold snugly on flat, round, and irregular-shaped edges.

Combine corner guards, surface guards, and end caps to create a system that protects walls and equipment from impact and wear. Often used in offices, hospitals, and schools, these systems protect against damage from small carts and chairs.

Often used to protect sheet metal during fiber and CO2 laser cutting, this film is also good for other fabrication processes such as bending, stamping, and forming. You can even leave this film on finished parts for protection against damage during shipping and storage.

Durable enough to be used in seat cushions, this flexible polyurethane foam provides gentle cushioning support.

Also known as Ethafoam.

Exceptionally strong, this lightweight ionomer foam offers excellent resistance to impact, UV light, and water. It stands up to wear caused by rubbing and scraping and is often used on bumpers and buoys.

Also called plucking foam, these scored foam sheets allow you to pull out individual cubes for custom-shaped packaging.

These sheets and strips will bounce back to shape, even after extended compression.

Even after extended compression, these sheets and strips will bounce back to shape.

Frequently called electrical-grade Garolite, this Garolite G-9 is strong, electrically insulating, and arc resistant in dry environments.

Made with a flame-retardant resin, this FRP fiberglass meets ASTM E84 Class A.

Also known as fishpaper.

Hard fiber is the easiest composite to machine, making it good for creating custom parts. Also known as vulcanized fiber.

Seal T-slots, rail ends, and gaps between rails to keep out dust, debris, and other contaminants.

Attach sensors, tubes, and other components to T-slotted framing rails and structures.

Route wires, cables, and tubing along T‐slotted rails.

This paper-thin material is commonly used for light-duty gasketing.

Able to withstand pressure up to 10,000 psi, this is our highest pressure-rated gasket material. It handles temperatures up to 850° F.

Made of vinyl rubber, these seals also resist salts and detergents. Hollow construction provides compressibility.

Made of solid silicone foam rubber, these seals also resist water and salts.

Hollow construction on these vinyl rubber seals provides better compressibility than seals with a foam core. They also resist salts and detergents.

This shim stock is color coded by thickness for easy identification. Cut it into custom shapes to fit your application.

Slide these shims behind your door’s hinge to align it in the jamb.

PVC threaded rods resist acids, alkalies, salt solutions, and alcohol.

Good for electroplating, paint baking, and powder-coating applications, these plugs withstand temperatures up to 600° F. To form a tight seal, use the smaller end of the plug to pull the larger end into a through hole.

Use these greaseproof mats where grease and oil are constantly present.

Use these antistatic, static-dissipative, or conductive mats to prevent static discharge that can harm sensitive electronics and equipment.

This dust-free, powder-like blend of minerals provides traction on slippery surfaces.

This tough, abrasion-resistant tape sticks to itself, so you can layer it over joints and seams to create an extra-strong bond. The thick adhesive conforms to fasteners and gaps to keep water out, even in extreme conditions.

No need for adhesive—this tape fuses to itself for a permanent seal and stretches to fit virtually any form. Also known as cold shrink tape.

Our most slippery tape, the slick surface allows items to glide smoothly over it.

This tape provides a slick surface along with excellent resistance to electrical current.

Also known as skived tape, this low-friction tape stretches to conform to irregular surfaces.

A silicon carbide coating over a carbon foam base combines the hardness, chemical resistance, and high temperatures silicon carbide is known for with the lightweight versaitility of foam. It’s often used for cores in composite layers and to filter molten metals and corrosive liquids.

These sheets are often used as shelves and supports in unsealed kilns or as a lining in metal processing equipment. They withstand high heat without sacrificing strength, thermal shock resistance, and chemical resistance.

Machine these rods into nozzles for acids, pins or supports for kilns, and other parts that require extreme hardness when exposed to quick temperature changes and chemicals. This nitride-bonded silicon carbide is better at transferring heat than most ceramics and expands without cracking when temperatures fluctuate.

To resist deforming, expanding, or cracking when compressed, bent, or exposed to quick temperature changes, these silicon-nitride ceramic discs have been pressed into ultra-dense discs. They’re just as strong and fracture resistant as zirconia ceramic, and hold their strength and shape at higher temperatures.

Often used as a protective shield in thermocouples and other conditions with drastic climate changes, these SiAlON ceramic tubes won't deform, expand, or crack when repeatedly exposed to large temperature changes.

A stainless steel insert makes this material stronger than standard compressible graphite.

Machine complicated shapes and precision parts from these glass-mica ceramic sheets in a fraction of the time it would take using other types of fired ceramic.

In addition to being oil resistant, this fabric protects against molten metal spatter when used vertically. Use as a heat shield or a welding curtain.

The lowest-density insulation we offer, these sheets are made of lightweight melamine foam.

Melamine has a lightweight construction that allows quick and easy installation. Use on cold and hot water piping and with refrigeration systems.

Wrap pipes, tubing, and fittings to prevent condensation from forming. These strips are for use on copper, iron, and steel.

Install these adhesive-back sheets to reduce noise from vibrating surfaces, such as duct and equipment housings.

The foil facing reflects heat. Use these sheets to quiet noisy areas and line machine enclosures. They’re made of humidity-resistant polyurethane foam.

Use these sheets to quiet noisy areas and line machine enclosures. They’re made of humidity-resistant polyurethane foam and have a smooth, easy-to-clean facing.

The best sound absorbers of all our rigid sheets, use to quiet noisy areas in your facility. They're peaked on one side for more sound-absorbing area than flat sheets. Made of melamine, they have an acrylic resin finish that resists dust and dirt and wipes clean.

Suspend these thin sheets to reflect sound and block noise from traveling to other parts of your facility.