Also known as starboard, these sheets and bars won’t degrade when exposed to salt water, humidity, and UV light.

This nylon stays lubricated over time because it’s filled with oil. Use it to fabricate parts for hard-to-reach places where adding lubricants would be difficult.

This nylon stays lubricated over time because it’s filled with oil. Use it to fabricate parts for hard-to-reach places where adding lubricants would be difficult.

When exposed to UV rays, these cores won’t become brittle or break down. Use them to add stiffness to composite sandwiches that may be used outdoors without adding a lot of weight.

Commonly called memory foam and Confor, these sheets and strips have the best cushioning qualities of all the foam we offer.

Protect sensitive equipment from heat buildup with this silicone foam. These sheets are commonly used to fill gaps and damp vibration in computers, battery installations, and pipe assemblies.

A good all-around choice, Garolite G-10/FR4 is strong, machinable, and electrically insulating. It meets UL 94 V-0 for flame retardance.

These rectangular tubes are flame retardant, machinable, and electrically insulating.

Use Garolite G-10 in place of Garolite G-10/FR4 for applications that are sensitive to halogen, such as in nuclear plants. It's strong, machinable, and electrically insulating.

Offering higher strength and better heat resistance than Garolite G-10/FR4, Garolite G-11 is suitable for continuous use in elevated temperatures.

Rated for temperatures down to -450° F, this Garolite G-10 CR performs better in cryogenic applications than other glass epoxies.

An alternative to wood in structural applications, FRP fiberglass is strong and lightweight.

An alternative to wood in structural applications, FRP fiberglass is strong and lightweight.

An alternative to wood in structural applications, FRP fiberglass is strong and lightweight.

This cotton fabric is treated to resist flames. Use as tarps.

These bumpers withstand temperatures up to 300° F, which is twice as high as our other load rated bumpers. Use them in applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, these bumpers absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Twist them into a threaded hole.

Stronger and able to withstand higher pressures than other types of aramid/Buna-N.

Each gasket comes with enough bolts and nuts to create a connection between two steel pipe flanges.

Often used in high-vibration applications that could cause standard thread sealants to fail, these never fully harden and remain pliable enough to self-heal and stop leaks before they start.

A high concentration of zinc gives these primers excellent corrosion resistance for protecting steel—when exposed to moisture and chemicals, the zinc rusts before the underlying steel can. They’re often used with structural steel.

Cover scratches and wear on storage racks and carts. Match the color to your manufacturers' equipment color.

Hide nicks and scratches on metal surfaces with this textured-finish paint. It stops rust from starting and prevents existing rust from spreading.

Stay organized with hooks, bin boxes, shelves, and tool holders that work with T-slotted framing.

Half the height and the same width as regular strut channel, this low-profile strut channel fits into tight spots and is compatible with many of the same brackets.

Run cable and tubing in the tightest spaces with channel that is one-quarter the height and one-half the width of regular strut channel.

This welded, one-piece strut channel combines two strut channels back-to-back.

This shim stock is color coded by thickness for easy identification. Cut it into custom shapes to fit your application.

Made of durable material, these washers resist wear from rubbing and scraping surfaces.

Made of polyester plastic, this tape resists tearing in high-temperature masking jobs, such as on circuit boards and when powder coating.

Outline and draw attention to safety zones and hazards with this tape.

Seal and label packages in one step.

Our thinnest duct tape, this tape is easy to unwind and tear by hand.

Good for electroplating, paint baking, and powder-coating applications, these plugs withstand temperatures up to 570° F. All are tapered to fit a range of hole diameters.

Designed with a flange, these plugs protect countersunk holes during anodizing, electroplating, paint baking, and powder-coating applications. All withstand temperatures up to 600° F. Use the smaller end of the plug to pull the larger end into a through hole to form a tight seal.

Make stairs, ramps, and walkways safer with this eye-catching, high-traction tape.

This solid fiberglass grating is good for wheel traffic and areas where you don't want small items and debris to fall through.

Multiple colors allow you to color-code your line for easy identification.

Designed for use in welding applications, this tubing has multiple layers of material and is specially formulated to self-extinguish.

This self-extinguishing tubing meets UL 94 V-0 or UL 94 V-2 for flame retardance to delay the spread of flames to valuable equipment.

Keep your work area tidy with this coiled tubing that extends when you need it and retracts out of the way when you don’t.

Use these dust caps and plugs to keep contaminants out of your hose line.

Great for use outdoors, these durable pads are neoprene rubber, which withstands exposure to direct sunlight.

Made of fiber-reinforced PVC, these pads endure exposure to corrosive chemicals, such as cleaning solvents, chlorine, and hydrochloric acid.

Capture intricate details when creating prototypes, molds, and linings with these easy-to-mix two-part compounds.

Add color when making plastic parts.

A good alternative to metal wool, nylon is waterproof and won’t rust, splinter, or shed.

Lap without the mess of pastes and slurries—abrasive is embedded in the surface of this waterproof film.

Build parts and prototypes from these filaments using Dremel fused filament fabrication (FFF) 3D printers.

Bumps, scrapes, and falls won’t damage these tough filaments. Known for their durability, they absorb impact without cracking or breaking, and won’t degrade when heated. Use them to print tool handles, storage cases, and other parts that are handled or dropped frequently.

Shield shafts and threaded parts from abrasion and chipping.

No need for a separate dispenser—these rolls already have dispensing handles.

Keep covered items dry with these UV-resistant tarps.

Let air in while keeping water out. Stronger than our other breathable tarps, these are UV, abrasion, and tear resistant.

The most puncture-, abrasion-, and tear-resistant tarps we offer.

Cover floors with these temporary protectors. Adhesive on the back keeps them in place better than taped paper, and they can be left for up to 30 days.

Plastic signs can be used outdoors.

Color code equipment and inventory.

These tags have a large hole for easy hanging.

Label totes, ingredient bags, racks, and other items to keep your food processing plant organized. These tags are laminated with aluminum, so they’ll set off metal detectors if they fall into your line.

A metal rim around the tag prevents warping.

Includes green, red, white, and yellow tags.

These tags have a matte surface so writing won't smudge or rub off accidentally. Write on them with a permanent marker.

Tags are laminated in plastic or aluminum so they hold up outdoors.

The messages on these tags display the status of your materials. Use them to mark equipment and track work in progress.

Indicate whether cylinders are full or empty.

Plastic tags withstand mild acids and are more corrosion resistant than metal tags.

Plastic tags withstand mild acids and are more corrosion resistant than metal tags.

Metal tags are more durable than plastic tags.

These tag protectors have an eyelet in each corner to band them around parts, cables, and other equipment. Insert a tag and then seal the laminating flap to protect the tag from moisture and wear.

Identify equipment, enclosures, or other areas at a glance.

Specify a starting number. Characters are imprinted and filled with black enamel for contrast.