Commonly used for tires, conveyor belts, and chutes, SBR (styrene butadiene rubber) is harder and offers better abrasion resistance than natural rubber.

Even after repetitive compression, these super-soft sheets and strips maintain their cushioning ability. Use them to dampen noise and isolate vibration.

These natural rubber sheets and strips will stretch up to six times their length. Use them in dynamic applications, such as vibration isolators and shock mounts.

With a thin metal backing, these sheets are good for use in bumpers, wear pads, machinery mounts, and other applications where some structural support is needed.

The thin profile seals narrow spaces such as channels and seams. Natural rubber will stretch up to six times its length.

Sunlight, ozone, and water won’t affect these sheets and strips.

Often used as inner tubes, butyl rubber won’t allow air, fumes, or gases to pass through.

Made from FDA-listed materials for use with food and beverage, these EPDM sheets and strips can be used in steamy environments.

Resistant to sunlight, ozone, and water, these rods are sized to seal narrow spaces such as channels.

Used to seal narrow spaces such as channels, these tubes offer more compression than solid EPDM rods.

Stronger than standard high-temperature silicone rods, these rods are longer lasting and more shock absorbent.

Meeting UL 94 V-0, these rods are flame retardant—use them to seal and cushion narrow spaces.

This rubber has better shock absorbing qualities and will provide longer life than Standard Multipurpose Neoprene.

Stronger and more durable than High-Strength Multipurpose Neoprene, this rubber can handle high-tension applications such as belting.

Meeting transportation industry standards for flames, smoke, and toxicity, these neoprene sheets and strips are used as cushioning pads in panels to reduce vibration and noise.

With one layer of nylon fabric for every 1/16” of thickness, these sheets have the strength to be used as flange gaskets, diaphragm packing, and anywhere heavy compression would squeeze nonreinforced neoprene out of place.

For every 1/4" of thickness there is one layer of super-strong fiberglass cloth that stands up to high stress and flex. Use these sheets as flange gaskets, diaphragm packing, and anywhere heavy compression would squeeze nonreinforced neoprene out of place.

Jackets, seals, and insulation are just a few of the many uses for rubber tubes.

Greater strength than standard High-Temperature Silicone translates into better shock-absorbing qualities and longer life.

Commonly used in electronics applications, these sheets transfer heat better than any other silicone we offer.

Filled with carbon black, these sheets won’t generate static charges and divert existing ones away from electronics. Use them as a conductor to protect components from static discharge.

One layer of fiberglass cloth is inserted between two layers of silicone rubber to give these sheets and strips the strength to stand up to high stress and flex. Use them as flange gaskets and anywhere heavy compression would squeeze nonreinforced silicone rubber out of place.

Seal and cushion corners with these 90° angles.

These 90° angles meet UL 94V0 for flame retardance.

Greater tensile strength than standard Food-Grade Oil-Resistant Buna-N rubber gives these sheets and strips better shock-absorbing qualities and longer life. They’re made from FDA-listed materials for use with food and beverage and offer good resistance to animal and vegetable oils.

Made from FDA-compliant materials for use with food and beverage, these sheets and strips won’t degrade from animal and vegetable oils.

Buna-N rubber resists fuel oil, hydraulic oil, ethylene glycol, and grease.

Because these sheets and strips are made from peroxide-cured Buna-N rubber, they have better heat resistance than standard Oil-Resistant Buna-N rubber sheets and strips.

Applications for these tubes include jackets, seals, and insulation.

Viton® fluoroelastomer stands up to tough chemicals, such as nitric acid, ethylene glycol, and isopropyl alcohol.

Even when temperatures rise to 445° F, these Kalrez sheets are resistant to virtually all classes of chemicals.

These small-diameter rods provide a seal in narrow spaces.

Temperatures as low as –70° F have no effect on these fluorosilicone sheets and strips.

This cord stock is softer and creates a better seal in low-pressure applications than standard Buna-N cord stock.

Made of FDA-listed material for use with food and beverage, this cord stock resists animal and vegetable oils, citric acid, sodium bicarbonate, and grease.

Create round-profile O-rings for sealing applications near ovens and other hot areas in your food plant.

This square-profile cord stock has flat edges on all four sides, which creates a better seal than round profile in static applications, such as hose, pipe, and faucet connections.

This cord stock resists benzene, boric acid, ethylene glycol, and isopropyl alcohol.

The X shape of this cord stock provides four points of contact for a better seal in dynamic applications than round profile. It also requires less compression to make a seal, so it offers a longer service life.

More chemical resistant than standard Viton® fluoroelastomer, this cord stock is made of Grade ETP Viton® fluoroelastomer. It resists harsh chemicals, such as calcium hydroxide, methyl ethyl ketone (MEK), and nitric and phosphoric acids.

This cord stock is softer and creates a better seal in low-pressure applications than standard fluoroelastomer cord stock.

Use neoprene cord stock to make O-rings for applications that come into contact with water.

These kits include everything you need to make your own Buna-N, fluoroelastomer, or EPDM O-rings.

These dual-material foam sheets and strips have ultra-soft polyurethane foam on one side and chemical-resistant polyethylene foam on the other. They are widely used in packaging applications to absorb shock and damp vibration.

When these sheets and strips are exposed to flames, the surface chars to create a protective barrier that prevents melting, dripping, and the possibility of spreading fire.

Good for tough vacuum-sealing and low closure-force applications, these polyurethane foam sheets and strips have open/closed cells to keep water, air, and gases from being absorbed when they are compressed at least 25%. Even after extended compression, all bounce back to shape faster than other foams we offer.

Made of FDA-listed materials, these polyethylene foam sheets are often used as packaging for food products to absorb shock and damp vibration.

These sheets and strips are made of cross-linked polyethylene, so they are stronger and more chemical resistant than other types of polyethylene foam.

Often used as padding in helmets, gloves, and boots, this super-strong EVA foam absorbs shock and resists tearing better than other types of foam.

Also called plucking foam, these scored foam sheets allow you to pull out individual cubes for custom-shaped packaging.

There are hundreds of cushioning pillows in every foot of these pliable mesh sheets. They're often used as a protective liner in drawers and cabinets and anywhere a nonskid surface is required.

Use these foam half rounds as a cushioning bumper.

The original mouse pad material. These natural foam rubber sheets have a crisscross-textured skin on one side for a nonslip gripping surface and a layer of polyester fabric on the other side that allows objects to smoothly slide across it.

In addition to having good resistance to water, sunlight, and oxidation, these neoprene foam sheets and strips resist swelling when they come into contact with oil.

Made of EPDM foam, these sheets and strips have the best resistance to water, sunlight, and oxidation of all the foam we offer.

EPDM is blended with neoprene and SBR to create a general-purpose foam that offers good resistance to water and wear.

These EPDM foam tubes have the best resistance to water, sunlight, and oxidation of all the foam tubes we offer.

Made of EPDM, this foam has the best resistance to water, sunlight, and oxidation of all the foam we offer.

This premium silicone is the most resilient foam we offer. It is equivalent to Cohrlastic and is also known as Norseal and silicone sponge.

These sheets and strips will bounce back to shape, even after extended compression.

Even after exposure to sunlight, rain, and snow, these silicone foam strips remain flexible.

Prevent the spread of flames with these self-extinguishing silicone foam sheets and strips.

A thin layer of aluminized fiberglass on this silicone foam reflects heat to protect sensitive equipment.

In addition to being lighter in weight than silicone foam, this polyimide foam also remains soft and conformable across a broader temperature range.

Seal and cushion narrow spaces in hot environments with these silicone foam cords.

Seal and damp vibration in high-temperature equipment with these rings.

Made of Buna-N foam, these sheets offer excellent oil resistance. They also resist fuel and solvents.

Made of Epichlorohydrin, an alternative to Buna-N, these foam sheets have excellent resistance to oil.

Protect electronic components from electrostatic shocks and chemicals while safeguarding them from bumps and drops during shipping and storing.

Offering excellent resistance to corrosive environments, these Viton® fluoroelastomer foam sheets and strips stand up to a wide variety of chemicals, fuels, and oils.

Made of rubber, this trim resists abrasion better than plastic trim. Often used on panels, boards, signs, and mirrors, it protects edges from impact.

A metal core adds strength and stability, making this trim more durable than standard rubber trim. Made of rubber, it resists abrasion better than plastic trim. Use it to protect the edges of panels, boards, signs, and mirrors from impact.

This trim safeguards equipment from static electricity by diverting electrostatic charges quickly. Made of rubber, it resists abrasion better than plastic trim. Use it to protect the edges of electronics equipment and circuit boards from impact.

This trim withstands temperatures up to 450° F, which is generally twice as high as our standard rubber trim. Use it to protect the edges of panels, boards, and signs from impact. Made of rubber, it resists abrasion better than plastic trim.

Black and yellow stripes create a visual alert to draw attention to equipment and obstructions. Designed to cushion during impact, this foam trim protects edges on posts, shelving, and other surfaces from damage.