We will reply to your message within an hour.
Use in food-processing environments for cutting surfaces, liners, and other high-wear applications. These sheets and strips are FDA compliant for direct contact with food.
FDA compliant for direct contact with food, these balls are often used to clean screens in vibrating sifters in food, beverage, and other sanitary environments. You can also use them as seals in pumps and check valves.
Made of FDA-listed materials, these sheets and strips are for use with food.
Made from FDA-compliant materials for use with food and beverage, these sheets and strips won’t degrade from animal and vegetable oils.
Temperatures as low as –70° F have no effect on these fluorosilicone sheets and strips.
Select these bumpers for applications that require specific load capacities. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Install them with a screw.
Twist these bumpers into a threaded hole. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces.
Select these bumpers for applications that require specific load capacities. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. Press them into place with the adhesive backing. They're comparable to Bumpon bumpers.
The polyurethane base on these mounts resists solvents, gasoline, and oil, while the metal plate sustains heavy loads.
Well-suited to moist environments, these mounts have a stainless steel plate for excellent corrosion resistance.
Good for electroplating, paint baking, and powder-coating applications, these plugs withstand temperatures up to 570° F. All are tapered to fit a range of hole diameters.
Good for electroplating, paint baking, and powder-coating applications, these plugs withstand temperatures up to 600° F. To form a tight seal, use the smaller end of the plug to pull the larger end into a through hole.
Designed with a flange, these plugs protect countersunk holes during anodizing, electroplating, paint baking, and powder-coating applications. All withstand temperatures up to 600° F. Use the smaller end of the plug to pull the larger end into a through hole to form a tight seal.
A time-saving alternative to threaded plugs, these plugs press in place and have an ergonomic pull tab for quick and easy removal. Use them to temporarily protect holes in objects from contaminants during storage, painting, and light fabrication.
These plugs withstand temperatures up to 600° F to protect internally threaded NPT connections from contaminants during electropainting, paint baking, and powder coating applications.
Tug on the pull tabs to stretch these caps onto the tips of bottles, beakers, flasks, and cylinders, creating an airtight seal.
Commonly called memory foam and Confor, these sheets and strips have the best cushioning qualities of all the foam we offer.
Also known as Ethafoam.
The open top allows these foam U-channels to slide over and cushion an edge.
Know at a glance when a tool is missing from a toolbox with this dual-color foam.
Similar to a sponge, this open-cell foam absorbs and holds up to 30 times its weight in liquid.
These fluorosilicone O-rings remain flexible at temperatures as low as -60° F. They resist ethanol, ethylene glycol, and isopropyl alcohol.
Flexible even at temperatures as low as -60° F, these fluorosilicone O-rings will keep your fittings free from leaks. They’re often used on fuel and coolant hose because fluorosilicone resists many chemicals, including ethanol and ethylene glycol.
If these O-rings deteriorate, they can be picked up by metal detection systems.
Inherently sticky, this silicone gel material conforms to irregular surfaces and stays in place for an effective moisture barrier.
Made from a blend of aramid fiber and Buna-N rubber.
In addition to oil, these blended aramid fiber/Buna-N rubber gaskets resist water and aliphatic hydrocarbons such as ethylene.
These blended aramid fiber/Buna-N rubber gaskets also resist water and aliphatic hydrocarbons such as ethylene.
Often called controlled swell gaskets, these gaskets absorb water near the inside of the flange and swell to fill gaps. Use them on uneven surfaces, such as grooved, corroded, or pitted flanges.
In addition to oil, these Buna-N gaskets resist water and salts.
To prevent contamination in your line, these gaskets set off metal detectors if a piece as small as 1 mm wears off. They’re EPDM, so the tight seal they form in stainless steel quick-clamp tube fittings withstands moist environments.
If a piece wears off, fragments as small as 1 mm can be picked up by a metal-detection system to prevent contamination of your process line.
Also resist aliphatic hydrocarbons, such as ethylene.
FDA compliant, these seals can directly touch food. They’re made of Buna-N foam, so they resist oil, grease, salts, water, and most detergents.
FDA compliant and made of silicone rubber, these seals are safe for direct contact with food and in temperatures up to 350° F.
Wrap this tape tightly around pipe and other surfaces to seal cracks and joints without having to shut down your system.
In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.
Compared to our standard UHMW polyethylene, these sheets and bars hold up better to scuffs and scrapes in high-speed, high-precision, and high-impact applications—such as conveyor equipment, chute liners, and machine guards. Also known as Tivar HPV.
Often used in high-speed, high-precision, and high-impact applications, such as conveyor rollers and bearings, these rods stand up to scratches and scuffs better than our standard UHMW polyethylene rods. Also known as Tivar HPV.
The addition of glass fibers makes this material more abrasion resistant than standard UHMW. It’s also known as Tivar 88.
If a chip of this material breaks off, it can be located by metal detectors to reduce contamination risks.
Often used to make gears and wear strips, these cast nylon 6 sheets and bars withstand higher temperatures and are easier to machine than standard nylon 6/6 sheets and bars.
A good choice for making sprockets and pulleys, these cast nylon 6 tubes withstand higher temperatures and are easier to machine than standard nylon 6/6 tubes.
Use these cast nylon 6 rods to make sheaves, bushings, and pulleys. All withstand higher temperatures and are easier to machine than standard nylon 6/6 rods.
A silicone additive gives this material a self-lubricating surface that reduces friction and extends the life of your parts.
Manufactured from Rulon PTFE, a PTFE that's modified with filler material for a super-slippery, impact-resistant surface that resists wear.
Common in food and pharmaceutical plants, these PEEK bars help you identify contaminated batches.
Often used in food and pharmaceutical plants, these PEEK rods help you prevent contaminated products from leaving your facility.
Use this tubing in high-temperature applications up to 390° F.
Multiple colors allow you to color-code your line for easy identification.
A braid reinforcement gives this tubing excellent strength in high-pressure applications up to 250 psi.
This multiple-line tubing holds together on its own, so there's no need for cable ties or tape.
Keep your work site safe and clutter free–this coiled tubing extends when you need it and retracts out of the way when you don't.
Designed for use in welding applications, this tubing has multiple layers of material and is specially formulated to self-extinguish.
Move high volumes of dry bulk food, powders, and pellets around your food processing plant while reducing the risk of contaminating the food.
Lighter than other plastic and rubber tubing, but extremely tough, this tubing stands up to the wear and tear of daily use.
Silicone with a metal additive, this tubing routes liquids and ingredients as hot as 390° F through your food plant and is caught by metal detectors if a piece falls into your line.
This tubing can handle the highest temperatures of all of our fuel and lubricant tubing. Use it in applications up to 450° F.
This tubing is soft enough to handle continuous bending and flexing, yet tough enough to resist tearing and abrasion.
Use these dust caps and plugs to keep contaminants out of your hose line.
Reduce the strain and fatigue of standing while working in food-processing and pharmaceutical plants, as well as in clean rooms.
Cushion where you stand without contaminating your line in food and pharmaceutical plants.
Create transparent molds to monitor fill levels, differentiate parts at a glance, and avoid damaging parts when cutting the mold away.
These silicone compounds offer good resistance to acids, oils and salt water.
Use these pads to protect your hands from intermittent exposure to direct heat when handling hot items.
Place either side of these mats against your work surface.
Bundle products in food plants while reducing the chance of contaminating the food.
Often used to bundle items in freezers, cold storage, and blast-chilling facilities, this banding retains its elasticity at low temperatures.