Made from FDA-listed materials for use with food.

FDA compliant for use with food and beverage, these rods fit into channels and other narrow spaces for sealing and cushioning.

Use these balls as seals in pumps and check valves, or let them bounce inside of vibrating sifters as an effective screen cleaner.

Use in food-processing environments for cutting surfaces, liners, and other high-wear applications. These sheets and strips are FDA compliant for direct contact with food.

FDA compliant for direct contact with food, these balls are often used to clean screens in vibrating sifters in food, beverage, and other sanitary environments. You can also use them as seals in pumps and check valves.

The addition of vinyl make these sheets the strongest Food Industry Oil-Resistant rubber we offer. Use them for high-tension applications, such as belting. They’re made from FDA-listed materials for use with food and offer good resistance to animal and vegetable oils.

Install these bumpers with screws. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces.

Press these bumpers into place with the adhesive backing. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. They're comparable to Bumpon bumpers.

Keep bumpers of various shapes, materials, and mounting styles on hand to solve whatever problems arise.

Made of EPDM foam rubber, these seals have hollow construction for more compressibility than solid seals.

Tested in accordance with UL and NFPA standards, these silicone rubber seals are for use on fire-rated doors.

Softer than standard Viton® fluoroelastomer O-rings, these offer a better seal in low-pressure applications.

Made of FDA-listed material for use with food and beverage, this cord stock resists animal and vegetable oils, citric acid, sodium bicarbonate, and grease.

Also resistant to inert gases and abrasion, this material is made from blended aramid fiber/SBR rubber.

Made of FDA-listed material for use with food and beverage.

Aramid fibers are blended with SBR rubber to resist inert gases. These gaskets also resist abrasion.

Even after extended compression, these sheets and strips will bounce back to shape.

These silicone foam cords meet NSF/ANSI 51 for food equipment materials. Use them to seal and cushion narrow spaces in food service equipment.

Durable enough to be used in seat cushions, this flexible polyurethane foam provides gentle cushioning support.

Made of FDA-listed materials, these polyethylene foam sheets are often used as packaging for food products to absorb shock and damp vibration.

There are hundreds of cushioning pillows in every foot of these pliable mesh sheets. They're often used as a protective liner in drawers and cabinets and anywhere a nonskid surface is required.

In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.

In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.

In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.

Also known as Tivar H.O.T., this material lasts up to 10 times longer in high-temperature applications than standard UHMW.

Because ABS maintains its toughness even after thermoforming, it’s often made into storage cases, tote trays, equipment housings, and protective gear.

Practically nonabsorbent, HDPE won't swell when exposed to moisture. It is denser and more rigid than LDPE, plus it's more chemical resistant.

Practically nonabsorbent, HDPE won't swell when exposed to moisture. It is denser and more rigid than LDPE, plus it's more chemical resistant.

Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

A glass-fiber filler gives this material increased rigidity over standard Delrin® acetal resin. Use it to machine manifolds, impellers, and other parts that require rigidity.

An economical alternative to Delrin® acetal resin, this acetal copolymer offers similar wear resistance.

An economical alternative to Delrin® acetal resin, this acetal copolymer offers similar wear resistance.

One of the softest and most flexible plastics we offer, LDPE is more formable than HDPE.

A polyester string reinforcement gives this material better tear resistance than standard LDPE film.

Because PVC resists many acids and alkalies, it’s widely used for tanks and in chemical-processing applications. Also known as PVC Type 1.

Widely used for vehicle interiors and equipment housings, this blended material maintains its physical properties after thermoforming. It is comparable to Kydex.

Because this polypropylene resists swelling when exposed to water, it’s often fabricated into containers and parts for laboratory equipment.

Because this polypropylene resists swelling when exposed to water, it’s often fabricated into containers and parts for laboratory equipment.

Widely used in semiconductor applications, this polypropylene meets UL flame-retardance standards.

Often fabricated into signs, packaging, and light duty housings, polystyrene is easy to thermoform.

The combination of high strength and water resistance, along with a variety of color choices, makes this opaque cast acrylic useful for outdoor signs and containers. It's also known as Lucite and Plexiglas® Acrylic.

This film is made with virgin Teflon® PTFE resins. It can handle extreme temperatures and resists most solvents.

Made with Teflon® PTFE resins, these sheets and bars surpass most plastics when it comes to chemical resistance and performance in extreme temperatures.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

Often used in assemblies that rub against each other, this powder blends into plastic, rubber, composites, and lubricants to keep them from sticking.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

Also called reprocessed and mechanical-grade PTFE, this material is an economical alternative to standard PTFE.

Just as chemical resistant as PTFE, yet FEP offers greater impact strength. Use it to make valve components and gaskets.

Use PFA in place of PTFE and FEP for durability in repetitive processes, such as pump parts. It is chemical resistant across a wide temperature range.

Stronger than PTFE, PVDF offers good chemical resistance. Comparable to Kynar and Solef, it’s widely used for pump parts, tank liners, and seals.

Made of FDA listed materials, these plugs are suitable for food contact. They're tapered to fit a range of hole diameters.

Designed with a flange, these plugs protect countersunk holes during anodizing, electroplating, paint baking, and powder-coating applications. All withstand temperatures up to 600° F. Use the smaller end of the plug to pull the larger end into a through hole to form a tight seal.

Use this tubing in high-temperature applications up to 390° F.

This multiple-line tubing holds together on its own, so there's no need for cable ties or tape.

Designed for use in welding applications, this tubing has multiple layers of material and is specially formulated to self-extinguish.

Not only can this tubing handle the highest temperatures of all our soft tubing for food, beverage, and dairy, it also has superior abrasion and crush resistance. Use in applications up to 450° F.

Hot food and beverage applications won’t harm this tubing—it can handle temperatures up to 390° F.

With a diameter of 2" or larger, this tubing has the girth to handle high volumes of acids and other harsh substances.

Replicate even the most complex details. These compounds flow smoothly into crevices.

Create lightweight molds with these two-part compounds.