About Durometer Hardness Scales
More
About Vibration-Damping Pads
More
Heavy Duty Unthreaded Bumpers
All of these bumpers are reinforced with an embedded washer or base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. Install them with screws. These bumpers are also known as recessed bumpers.
Bumpers with a hard and medium-hard rating withstand high levels of impact. The harder the bumper, the more impact it withstands.
Polyurethane bumpers have better abrasion resistance than SBR bumpers. They won't become brittle and crack when exposed to ozone, are nonmarking, and can be used outdoors.
Neoprene bumpers have good abrasion resistance. They can be used outdoors.
For technical drawings and 3-D models, click on a part number.
Mounting Hole | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg. | Wd. | Ht. | Mounting Surface Ht. | Counterbore Dia. | Dia. | Ctr.-to-Ctr. | Temp. Range, °F | For Use Outdoors | Hardness Rating | Hardness | Nonmarking | Color | Each | |
Polyurethane Rubber with Aluminum Base Plate | ||||||||||||||
1 1/2" | 1" | 3/4" | 1/8" | 13/32" | 9/32" | 3/4" | -40° to 200° | Yes | Hard | Durometer 80A | Yes | Red | 0000000 | 000000 |
1 3/4" | 1" | 1 3/4" | 1/8" | 13/32" | 9/32" | 1" | -40° to 200° | Yes | Hard | Durometer 80A | Yes | Red | 0000000 | 00000 |
2" | 1" | 1/2" | 1/8" | 7/16" | 9/32" | 1 1/4" | -40° to 200° | Yes | Hard | Durometer 80A | Yes | Red | 0000000 | 00000 |
2" | 1" | 3/4" | 1/8" | 7/16" | 9/32" | 1 1/4" | -40° to 200° | Yes | Hard | Durometer 80A | Yes | Red | 0000000 | 00000 |
2" | 1" | 1" | 1/8" | 7/16" | 9/32" | 1 1/4" | -40° to 200° | Yes | Hard | Durometer 80A | Yes | Red | 0000000 | 00000 |
2" | 1" | 1 1/2" | 1/8" | 7/16" | 9/32" | 1 1/4" | -40° to 200° | Yes | Hard | Durometer 80A | Yes | Red | 0000000 | 00000 |
2 1/2" | 1 1/4" | 3/4" | 1/8" | 7/16" | 9/32" | 1 3/4" | -40° to 200° | Yes | Hard | Durometer 80A | Yes | Red | 0000000 | 00000 |
2 1/2" | 1 1/4" | 1" | 1/8" | 7/16" | 9/32" | 1 3/4" | -40° to 200° | Yes | Hard | Durometer 80A | Yes | Red | 0000000 | 00000 |
2 1/2" | 1 1/4" | 1 1/2" | 1/8" | 7/16" | 9/32" | 1 3/4" | -40° to 200° | Yes | Hard | Durometer 80A | Yes | Red | 0000000 | 00000 |
3" | 1" | 1 3/4" | 1/8" | 9/16" | 13/32" | 1 3/4" | -40° to 200° | Yes | Hard | Durometer 80A | Yes | Red | 0000000 | 00000 |
3" | 1 1/2" | 3/4" | 1/8" | 7/16" | 9/32" | 2" | -40° to 200° | Yes | Hard | Durometer 80A | Yes | Red | 0000000 | 00000 |
3" | 1 1/2" | 1" | 1/8" | 7/16" | 9/32" | 2" | -40° to 200° | Yes | Hard | Durometer 80A | Yes | Red | 0000000 | 00000 |
3" | 1 1/2" | 1" | 1/8" | 1/2" | 11/32" | 2" | -40° to 200° | Yes | Hard | Durometer 80A | Yes | Red | 0000000 | 00000 |
3" | 1 1/2" | 1 1/2" | 1/8" | 7/16" | 9/32" | 2" | -40° to 200° | Yes | Hard | Durometer 80A | Yes | Red | 0000000 | 00000 |
4" | 1" | 3/4" | 1/8" | 13/32" | 9/32" | 1" | -40° to 200° | Yes | Hard | Durometer 80A | Yes | Red | 0000000 | 00000 |
Polyurethane Rubber with Steel Base Plate | ||||||||||||||
1 3/4" | 1" | 3/4" | 1/8" | 13/32" | 9/32" | 1" | -40° to 200° | Yes | Hard | Durometer 80A | Yes | Red | 0000000 | 00000 |
2 1/2" | 5/8" | 5/8" | 1/8" | 13/32" | 9/32" | 1 1/2" | -40° to 200° | Yes | Hard | Durometer 80A | Yes | Red | 0000000 | 00000 |
2 1/2" | 2" | 2" | 1/8" | 1/2" | 11/32" | 1 1/2" | -40° to 200° | Yes | Hard | Durometer 80A | Yes | Red | 0000000 | 00000 |
Neoprene Rubber with Aluminum Base Plate | ||||||||||||||
1 1/2" | 1" | 3/4" | 1/8" | 13/32" | 9/32" | 3/4" | -40° to 200° | Yes | Hard | Durometer 80A | No | Black | 0000000 | 00000 |
1 3/4" | 1" | 1 3/4" | 1/8" | 13/32" | 9/32" | 1" | -40° to 200° | Yes | Hard | Durometer 80A | No | Black | 0000000 | 00000 |
3" | 1" | 1 3/4" | 1/8" | 19/32" | 13/32" | 1 3/4" | -40° to 200° | Yes | Hard | Durometer 80A | No | Black | 0000000 | 00000 |
3" | 1 1/2" | 1" | 1/8" | 1/2" | 11/32" | 2" | -40° to 200° | Yes | Hard | Durometer 80A | No | Black | 0000000 | 00000 |
4" | 1" | 3/4" | 1/8" | 13/32" | 9/32" | 1" | -40° to 200° | Yes | Hard | Durometer 80A | No | Black | 0000000 | 00000 |
Neoprene Rubber with Steel Base Plate | ||||||||||||||
1 3/4" | 1" | 3/4" | 1/8" | 13/32" | 9/32" | 1" | -40° to 200° | Yes | Hard | Durometer 80A | No | Black | 0000000 | 0000 |
2 1/2" | 5/8" | 5/8" | 1/8" | 13/32" | 9/32" | 1 1/2" | -40° to 200° | Yes | Hard | Durometer 80A | No | Black | 0000000 | 0000 |
2 1/2" | 2" | 2" | 1/8" | __ | 11/32" | 1 1/2" | -40° to 200° | Yes | Hard | Durometer 80A | No | Black | 0000000 | 00000 |
2 1/2" | 2" | 2" | 1/8" | 1/2" | 11/32" | 1 1/2" | -40° to 200° | Yes | Hard | Durometer 80A | No | Black | 0000000 | 00000 |
Unthreaded Bumpers
Install these bumpers with screws. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. All have a hard rating to withstand high levels of impact. They're also known as recessed bumpers.
Polyurethane bumpers have better abrasion resistance than SBR bumpers. They won't become brittle and crack when exposed to ozone, are nonmarking, and can be used outdoors.
For technical drawings and 3-D models, click on a part number.
Lg. | Wd. | Ht. | Mounting Hole Dia. | Temp. Range, °F | For Use Outdoors | Hardness Rating | Hardness | Nonmarking | Color | Each | |
Polyurethane Rubber | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
2 7/16" | 1 5/8" | 1/2" | 15/32" | -10° to 170° | Yes | Hard | Durometer 75A | Yes | Black | 0000000 | 000000 |
Nonslip Unthreaded Bumpers
These nonslip bumpers protect equipment while minimizing the movement of objects that come in contact, making them good for positioning and robotic-gripping applications. All have an aluminum base plate that adds strength, but is flexible enough to bend around a curve. Made of Buna-N, these bumpers resist abrasion, oil, and grease. They can be used outdoors, and all have a medium-hard rating to withstand high levels of impact.
Smooth bumpers distribute gripping force evenly, which makes them good for applications involving motion, such as conveyor belts.
Fine criscross bumpers have better grip on irregular surfaces than smooth bumpers.
Crisscross bumpers have good grip on rough and irregular surfaces, even if there’s debris.
Unthreaded-hole bumpers mount with screws.
Adhesive-back bumpers allow for easy installation.
Drill-your-own hole/glue-on bumpers require contact adhesive or drilling your own holes and mounting them with screws.
For technical drawings and 3-D models, click on a part number.
Mounting Hole | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg. | Wd. | Ht. | Base Plate Thick. | Counterbore Dia. | Dia. | Ctr.-to-Ctr. | Temp. Range, °F | For Use Outdoors | Hardness Rating | Hardness | Nonmarking | Color | Each | |
Buna-N Rubber with Aluminum Base Plate | ||||||||||||||
Unthreaded Hole | ||||||||||||||
1 3/4" | 1" | 1/4" | 1/16" | 5/16" | 11/64" | 1" | -60° to 170° | Yes | Medium Hard | Durometer 60A | No | Black | 00000000 | 000000 |
1 3/4" | 1" | 1/2" | 1/16" | 5/16" | 11/64" | 1" | -60° to 170° | Yes | Medium Hard | Durometer 60A | No | Black | 00000000 | 00000 |
2 1/2" | 5/8" | 1/4" | 1/16" | 5/16" | 11/64" | 1 1/2" | -60° to 170° | Yes | Medium Hard | Durometer 60A | No | Black | 00000000 | 00000 |
2 1/2" | 5/8" | 1/2" | 1/16" | 5/16" | 11/64" | 1 1/2" | -60° to 170° | Yes | Medium Hard | Durometer 60A | No | Black | 0000000 | 00000 |
Adhesive Back | ||||||||||||||
1 3/4" | 1" | 1/4" | 1/16" | __ | __ | __ | -60° to 170° | Yes | Medium Hard | Durometer 60A | No | Black | 00000000 | 00000 |
1 3/4" | 1" | 1/2" | 1/16" | __ | __ | __ | -60° to 170° | Yes | Medium Hard | Durometer 60A | No | Black | 00000000 | 00000 |
2 1/2" | 5/8" | 1/4" | 1/16" | __ | __ | __ | -60° to 170° | Yes | Medium Hard | Durometer 60A | No | Black | 00000000 | 00000 |
2 1/2" | 5/8" | 1/2" | 1/16" | __ | __ | __ | -60° to 170° | Yes | Medium Hard | Durometer 60A | No | Black | 0000000 | 00000 |
6" | 1 1/4" | 1/4" | 1/16" | __ | __ | __ | -60° to 170° | Yes | Medium Hard | Durometer 60A | No | Black | 00000000 | 00000 |
6" | 1 1/4" | 1/2" | 1/16" | __ | __ | __ | -60° to 170° | Yes | Medium Hard | Durometer 60A | No | Black | 00000000 | 00000 |
Drill-Your-Own Hole/Glue On | ||||||||||||||
6" | 1 1/4" | 1/4" | 1/16" | __ | __ | __ | -60° to 170° | Yes | Medium Hard | Durometer 60A | No | Black | 00000000 | 00000 |
6" | 1 1/4" | 1/2" | 1/16" | __ | __ | __ | -60° to 170° | Yes | Medium Hard | Durometer 60A | No | Black | 00000000 | 00000 |
Textured
Surface
Mounting Hole | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg. | Wd. | Ht. | Base Plate Thick. | Counterbore Dia. | Dia. | Ctr.-to-Ctr. | Temp. Range, °F | For Use Outdoors | Hardness Rating | Hardness | Nonmarking | Color | Each | |
Buna-N Rubber with Aluminum Base Plate | ||||||||||||||
Unthreaded Hole | ||||||||||||||
1 3/4" | 1" | 1/4" | 1/16" | 5/16" | 11/64" | 1" | -60° to 170° | Yes | Medium Hard | Durometer 60A | No | Black | 00000000 | 000000 |
1 3/4" | 1" | 1/2" | 1/16" | 5/16" | 11/64" | 1" | -60° to 170° | Yes | Medium Hard | Durometer 60A | No | Black | 00000000 | 00000 |
2 1/2" | 5/8" | 1/4" | 1/16" | 5/16" | 11/64" | 1 1/2" | -60° to 170° | Yes | Medium Hard | Durometer 60A | No | Black | 0000000 | 00000 |
2 1/2" | 5/8" | 1/2" | 1/16" | 5/16" | 11/64" | 1 1/2" | -60° to 170° | Yes | Medium Hard | Durometer 60A | No | Black | 0000000 | 00000 |
Adhesive Back | ||||||||||||||
1 3/4" | 1" | 1/4" | 1/16" | __ | __ | __ | -60° to 170° | Yes | Medium Hard | Durometer 60A | No | Black | 00000000 | 00000 |
2 1/2" | 5/8" | 1/4" | 1/16" | __ | __ | __ | -60° to 170° | Yes | Medium Hard | Durometer 60A | No | Black | 0000000 | 00000 |
2 1/2" | 5/8" | 1/2" | 1/16" | __ | __ | __ | -60° to 170° | Yes | Medium Hard | Durometer 60A | No | Black | 0000000 | 00000 |
6" | 1 1/4" | 1/4" | 1/16" | __ | __ | __ | -60° to 170° | Yes | Medium Hard | Durometer 60A | No | Black | 0000000 | 00000 |
6" | 1 1/4" | 1/2" | 1/16" | __ | __ | __ | -60° to 170° | Yes | Medium Hard | Durometer 60A | No | Black | 0000000 | 00000 |
Drill-Your-Own Hole/Glue On | ||||||||||||||
6" | 1 1/4" | 1/4" | 1/16" | __ | __ | __ | -60° to 170° | Yes | Medium Hard | Durometer 60A | No | Black | 0000000 | 00000 |
6" | 1 1/4" | 1/2" | 1/16" | __ | __ | __ | -60° to 170° | Yes | Medium Hard | Durometer 60A | No | Black | 0000000 | 00000 |
Mounting Hole | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg. | Wd. | Ht. | Base Plate Thick. | Counterbore Dia. | Dia. | Ctr.-to-Ctr. | Temp. Range, °F | For Use Outdoors | Hardness Rating | Hardness | Nonmarking | Color | Each | |
Buna-N Rubber with Aluminum Base Plate | ||||||||||||||
Unthreaded Hole | ||||||||||||||
1 3/4" | 1" | 1/4" | 1/16" | 5/16" | 11/64" | 1" | -60° to 170° | Yes | Medium Hard | Durometer 60A | No | Black | 00000000 | 000000 |
1 3/4" | 1" | 1/2" | 1/16" | 5/16" | 11/64" | 1" | -60° to 170° | Yes | Medium Hard | Durometer 60A | No | Black | 00000000 | 00000 |
2 1/2" | 5/8" | 1/4" | 1/16" | 5/16" | 11/64" | 1 1/2" | -60° to 170° | Yes | Medium Hard | Durometer 60A | No | Black | 00000000 | 00000 |
2 1/2" | 5/8" | 1/2" | 1/16" | 5/16" | 11/64" | 1 1/2" | -60° to 170° | Yes | Medium Hard | Durometer 60A | No | Black | 0000000 | 00000 |
Adhesive Back | ||||||||||||||
2 1/2" | 5/8" | 1/4" | 1/16" | __ | __ | __ | -60° to 170° | Yes | Medium Hard | Durometer 60A | No | Black | 00000000 | 00000 |
6" | 1 1/4" | 1/4" | 1/16" | __ | __ | __ | -60° to 170° | Yes | Medium Hard | Durometer 60A | No | Black | 00000000 | 00000 |
Drill-Your-Own Hole/Glue On | ||||||||||||||
6" | 1 1/4" | 1/4" | 1/16" | __ | __ | __ | -60° to 170° | Yes | Medium Hard | Durometer 60A | No | Black | 00000000 | 00000 |
6" | 1 1/4" | 1/2" | 1/16" | __ | __ | __ | -60° to 170° | Yes | Medium Hard | Durometer 60A | No | Black | 00000000 | 00000 |
Adhesive-Back Bumpers
Press these bumpers into place with the adhesive backing. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. They're comparable to Bumpon bumpers.
Bumpers with a medium and medium-soft rating offer a balance of cushioning and impact resistance. The softer the bumper, the more it cushions. Bumpers with an extra-hard and medium-hard rating withstand higher levels of impact than softer bumpers. The harder the bumper, the more impact it withstands.
Polyurethane bumpers have good abrasion resistance. They're also nonmarking.
For technical drawings and 3-D models, click on a part number.
Lg. | Wd. | Ht. | Temp. Range, °F | For Use Outdoors | Hardness Rating | Hardness | Nonmarking | Color | Pkg. Qty. | Pkg. | |
Polyurethane Rubber | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
1/2" | 1" | 1/8" | -20° to 190° | No | Extra Hard | Durometer 90A | Yes | Black | 10 | 000000000 | 000000 |
1/2" | 1" | 1/8" | -20° to 190° | No | Medium Hard | Durometer 65A | Yes | Black | 10 | 000000000 | 00000 |
1/2" | 1" | 1/8" | -20° to 190° | No | Medium Soft | Durometer 40A | Yes | Black | 10 | 000000000 | 00000 |
1" | 2" | 1/4" | -20° to 190° | No | Extra Hard | Durometer 90A | Yes | Black | 5 | 000000000 | 00000 |
1" | 2" | 1/4" | -20° to 190° | No | Medium Hard | Durometer 65A | Yes | Black | 5 | 000000000 | 00000 |
1" | 2" | 1/4" | -20° to 190° | No | Medium Soft | Durometer 40A | Yes | Black | 5 | 000000000 | 00000 |
2" | 3" | 1/4" | -20° to 190° | No | Extra Hard | Durometer 90A | Yes | Black | 2 | 000000000 | 00000 |
2" | 3" | 1/4" | -20° to 190° | No | Medium Hard | Durometer 65A | Yes | Black | 2 | 000000000 | 00000 |
2" | 3" | 1/4" | -20° to 190° | No | Medium Soft | Durometer 40A | Yes | Black | 2 | 000000000 | 00000 |
Threaded Bumpers
Mount these bumpers on a threaded stud. All are reinforced with a steel core or base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. All of these bumpers can be used outdoors.
Bumpers with an extra-hard, hard, and medium-hard rating withstand high levels of impact. The harder the bumper, the more impact it withstands.
Neoprene bumpers have good abrasion resistance.
For technical drawings and 3-D models, click on a part number.
Thread | Mounting Hole | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Dp. | Lg. | Wd. | Ht. | Ctr.-to-Ctr. | Dp. | Base Plate Thick. | Temp. Range, °F | For Use Outdoors | Hardness Rating | Hardness | Nonmarking | Color | Each | |
Neoprene Rubber with Steel Base Plate | |||||||||||||||
5/16"-18 | 1/8" | 4" | 2 1/2" | 2" | 3 1/4" | 1" | 1/8" | -40° to 200° | Yes | Hard | Durometer 80A | No | Black | 0000000 | 000000 |
Liquid-Tight Sealing Grommets
Rated IP68, these grommets form liquid-tight seals around wire, cable, and cords to protect them against dust as well as submersion in a maximum of one meter of water. They’re often used in lighting cable applications. Made of rubber, all of these grommets have a flange to securely fasten them to surfaces with screws.
Grommets for outdoor use are commonly used in marine and antenna cable applications.
For technical drawings and 3-D models, click on a part number.
UV-Resistant Vibration-Damping Pads
Great for use outdoors, these durable pads are neoprene rubber, which withstands exposure to direct sunlight. They're also resistant to oils and solvents. Place pads under equipment, such as drill presses, milling machines, saws, and air-conditioning units to minimize vibration and noise transmitted to and from machinery.
Crisscross-textured pads provide stability and a secure grip between your machinery and the floor.
For technical drawings and 3-D models, click on a part number.
Lg. | Wd. | Thick. | Capacity per Mounting Point, lbs./sq. in. | Deflection @ Capacity | Hardness | Hardness Rating | Shape | Material | Temperature Range, °F | Each | |
Crisscross | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
20" | 40" | 1" | 500 | 0.16" | Durometer 90A | Extra Hard | Rectangular | Green Neoprene Rubber | 0° to 175° | 0000000 | 0000000 |
Smooth | |||||||||||
20" | 40" | 9/16" | 500 | 0.06" | Durometer 90A | Extra Hard | Rectangular | Green Neoprene Rubber | 0° to 175° | 0000000 | 000000 |
Vibration-Damping Pads for Heavy Machinery
These pads are heavy duty and made for use under heavy machinery and equipment. They're nitrile rubber, which is resistant to oil and solvents. Place pads under equipment, such as drill presses, milling machines, saws, and air-conditioning units to minimize vibration and noise transmitted to and from machinery.
For technical drawings and 3-D models, click on a part number.
Lg. | Wd. | Thick. | Capacity per Mounting Point, lbs./sq. in. | Deflection @ Capacity | Hardness | Hardness Rating | Material | Temperature Range, °F | Each | |
Rectangular | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
12" | 24" | 1/8" | 1,500 | 0.04" | Durometer 80A | Hard | Black Nitrile Rubber | -65° to 200° | 0000000 | 000000 |
12" | 24" | 1/4" | 1,500 | 0.09" | Durometer 80A | Hard | Black Nitrile Rubber | -65° to 200° | 0000000 | 000000 |
12" | 24" | 3/8" | 1,500 | 0.14" | Durometer 80A | Hard | Black Nitrile Rubber | -65° to 200° | 0000000 | 000000 |
12" | 24" | 1/2" | 1,500 | 0.15" | Durometer 80A | Hard | Black Nitrile Rubber | -65° to 200° | 0000000 | 000000 |
12" | 24" | 1" | 1,500 | 0.28" | Durometer 80A | Hard | Black Nitrile Rubber | -65° to 200° | 0000000 | 000000 |
Vibration-Damping Pads
These vibration-damping pads resist abrasion and tears, providing excellent durability. Place pads under equipment to minimize vibration and noise transmitted to and from machinery.
Recycled rubber pads have a higher capacity for heavier equipment than natural rubber pads. They have excellent oil and weather resistance.
For technical drawings and 3-D models, click on a part number.
Lg. | Wd. | Thick. | Capacity per Mounting Point, lbs./sq. in. | Deflection @ Capacity | Hardness | Hardness Rating | Temperature Range, °F | Each | |
Black Recycled Rubber | |||||||||
---|---|---|---|---|---|---|---|---|---|
Rectangle | |||||||||
23" | 11 1/2" | 9/16" | 225 | 0.5" | Durometer 55A | Medium | -20° to 200° | 00000000 | 000000 |
Oil-Resistant Vibration-Damping Pads
Made of nitrile rubber, these pads have excellent resistance to oil and solvents. Place them under equipment to minimize vibration and noise transmitted to and from machinery.
For technical drawings and 3-D models, click on a part number.
Fabric-Reinforced Vibration-Damping Pads for Heavy Machinery
Reinforced with fabric so extreme compression won’t deform them, these pads protect surfaces from impact, dampen vibration and noise, and act as stable connection points. Use them to mount forging hammers, stamping presses, rock crushers, shearing machines, vibratory feeders, and other heavy machinery. They also create uniform weight-bearing areas between steel and concrete columns, even if there are surface irregularities. Made of nitrile—also known as NBR, Buna-N, and acrylonitrile butadiene—they resist oil and solvents. All meet MIL-C-882, which tests the quality, density, capacity, compression, deflection, and oil- and mold-resistance of materials used in military construction. They’re commonly known as bearing pads.
Length | Width | Thickness | Capacity per Mounting Point, lbs./sq. in. | Deflection @ Capacity | Hardness | Hardness Rating | Reinforcement Material | Temperature Range, °F | Specifications Met | Each | |
Orange Nitrile Rubber | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Rectangle | |||||||||||
24" | 12" | 1/8" | 2,000 | 0.02" | Durometer 90A | Extra Hard | Cotton/Polyester Fabric | -40° to 200° | MIL-C-882 | 0000000 | 0000000 |
24" | 12" | 1/2" | 2,000 | 0.07" | Durometer 90A | Extra Hard | Cotton/Polyester Fabric | -40° to 200° | MIL-C-882 | 0000000 | 000000 |
24" | 12" | 1" | 2,000 | 0.14" | Durometer 90A | Extra Hard | Cotton/Polyester Fabric | -40° to 200° | MIL-C-882 | 0000000 | 000000 |
Chemical-Resistant Vibration-Damping Pads
Made of PVC, these pads endure exposure to corrosive chemicals, such as cleaning solvents, chlorine, and hydrochloric acid. Place them under equipment to minimize vibration and noise transmitted to and from machinery.
PVC/cork blend pads provide increased deflection and vibration damping.
Crisscross-textured pads provide stability and a secure grip between your machinery and the floor. Those with a 7/8" thickness are best for protecting systems from disturbances.
Lg. | Wd. | Thick. | Capacity per Mounting Point, lbs./sq. in. | Deflection @ Capacity | Hardness | Hardness Rating | Temperature Range, °F | Each | |
Green PVC Plastic | |||||||||
---|---|---|---|---|---|---|---|---|---|
Crisscross Texture | |||||||||
20" | 10" | 9/32" | 174 | 0.04" | Durometer 85A | Hard | 32° to 150° | 000000 | 000000 |
39" | 20" | 9/32" | 174 | 0.04" | Durometer 85A | Hard | 32° to 150° | 000000 | 00000 |
Smooth Texture | |||||||||
20" | 10" | 9/16" | 363 | 0.04" | Durometer 90A | Extra Hard | 32° to 150° | 0000000 | 00000 |
39" | 20" | 9/16" | 363 | 0.04" | Durometer 90A | Extra Hard | 32° to 150° | 0000000 | 000000 |
Green PVC/Cork Blend | |||||||||
Crisscross Texture | |||||||||
20" | 10" | 5/8" | 116 | 0.05" | Durometer 80A | Hard | 32° to 150° | 000000 | 00000 |
20" | 10" | 7/8" | 58 | 0.13" | Durometer 65A | Medium Hard | 32° to 150° | 0000000 | 00000 |
39" | 20" | 5/8" | 116 | 0.05" | Durometer 80A | Hard | 32° to 150° | 000000 | 000000 |
39" | 20" | 7/8" | 58 | 0.13" | Durometer 65A | Medium Hard | 32° to 150° | 000000 | 000000 |
Conformable Cushioned Round Grips
Add or replace worn grips on round and irregularly shaped handles on hammers, axes, and other hand tools. These grips have a removable spiral-wound core. Slide them on a handle and use the tab to pull out the core. The grips contract and conform to your handle as the core is removed. Made of EPDM foam, they insulate and cushion vibration. For a proper fit, choose grips with the smallest diameter range that will fit over your handle.
For technical drawings and 3-D models, click on a part number.
Adhesive-Back Cushioned Wrap-On Grips
The adhesive backing keeps these grips in place. Made of EPDM foam, they are three times thicker than standard wrap-on grips to insulate and cushion vibration. Wrap them onto handles of any shape or size and secure with the included finishing tape.
For technical drawings and 3-D models, click on a part number.
Cushioned Wrap-On Grips
Thicker than standard wrap-on grips, these cushioned grips are made of EPDM foam to insulate and cushion vibration. Wrap them onto handles of any shape or size.
3/4” wide grips include finishing tape to secure grips onto handles.
For technical drawings and 3-D models, click on a part number.