We will reply to your message within an hour.
For use with a single line, these clamps brace pipe, tubing, and conduit directly against the mounting surface.
A cushion covering the clamp reduces vibration and wear from clamp edges. Clamps surround lines of pipe, tubing, and conduit completely while holding them close to the mounting surface.
These clamps completely surround single lines of pipe, tubing, and conduit while holding them close to the mounting surface.
Also known as pipe shields, these cradles provide additional support and prevent insulation from tearing when routing insulated pipe through loop hangers.
Reduce movement in your line with hangers that are more rigid than strap hangers and fit tighter around pipe, conduit, and tube than loop hangers.
For a strong, secure connection, mount these hangers by welding them to a rod.
Cut as much strap as you need to hang duct, pipe, and other materials.
A durable rubber cushion and mounting plate prevent corrosion and wear caused by metal-to-metal contact. The mounting plate is removable, so the U-bolts can be installed onto an existing line without needing to disassemble it.
Mount these general purpose U-bolts into an existing bracket, or combine with a mounting plate for a secure hold at the mounting surface.
A mounting plate provides a more secure hold at the mounting surface.
Suspend and route flat-bottomed objects such as strut channel and small duct.
These U-shaped supports allows access to pipe and conduit after installation.
Also known as bridle rings, routing rings have an open-eye design that allows you to quickly install wire and cable.
Mount these ringbolts into a threaded hole, or use the nut for through-hole mounting. The pivoting ring allows material to move freely.
Hang cable and other flexible material beneath wire to prevent it from sagging and swaying. To install, hook the two ends of the ring around the wire—no fasteners required.
Route bundles of wire and cable through a single hook. A wide opening allows access for installation, adjustment, and removal.
These clamps must be oriented with the saddle on the long (live) end and the U-bolt on the short (dead) end. They’re also known as wire rope clips.
Constructed with a saddle for both the long (live) end and the short (dead) end, these clamps apply equal pressure without crimping or crushing the wire rope, so orientation doesn't matter. Also known as fist grip wire rope clips.
Use in noncritical applications, such as fencing, where the strength of a forged clamp is not required. Install clamps so the saddle is on the long (live) end and the U-bolt is on the short (dead) end. They’re also known as wire rope clips.
Join duct and fittings with quick-release clamps for faster disassembly and cleanout than other duct systems.
Secure grating to your support structure.
Add hardware to strut channel without having to hold the washer in place or reach inside the channel.
Keep hardware centered in the strut channel slot.
Use with hex nuts to connect threaded rod.
Notches on these washers grip the channel to keep them in place.
A spring plus serrated grooves that grip the lip of the channel provide a more secure hold than standard strut channel nuts.
Along with fencing, these staples can also be used to install suspended ceilings and to secure insulation.