These harnesses have leather-insulated metal components and meet ASTM F887 when used with an arc flash-resistant lanyard. They have a D-ring on the back that attaches to a lanyard. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.

Made of heat-resistant Nomex, these harnesses withstand temperatures up to 700° F. They have a D-ring on the back that attaches to a lanyard. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.

Prevent suspension trauma when hanging motionless. Strap attaches to a harness and has a foot loop so workers can flex legs while suspended.

D-rings on each hip provide a stable working position. Harnesses have a D-ring on the back that attaches to a lanyard for fall protection. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.

Polyester/elastomer harnesses expand and contract with your movements.

These versatile harnesses have one D-ring on the chest for use with ladder-climbing systems as well as one D-ring on each hip to provide a stable working position. Attach harness to a ladder-climbing system using a carabiner. Harnesses have a D-ring on the back that attaches to a lanyard for fall protection. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.

With D-rings on the shoulders, these harnesses allow you to raise and lower workers. They have a D-ring on the back that attaches to a lanyard. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.

For adequate fall clearance, you must have at least 18 1/2 ft. of clearance. Use in conjunction with a harness for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.

Polyester/elastomer lanyards expand and contract with your movements.

Hook-over lanyards have a large snap hook that attaches directly to a rated structure such as a scaffold or pipe to create an anchor point.

Wraparound lanyards loop around a rated structure such as an I-beam and then attach to themselves to create an anchor point.

Made of Kevlar, these lanyards meet ASTM F887 when used with an arc flash-resistant harness. Wrap the lanyard around a rated structure such as an I-beam and then attach it to itself to create an anchor point. For adequate fall clearance, you must have at least 18 1/2 ft. of clearance. Use in conjunction with a harness for a complete fall-arrest system.

Made of steel, these durable lanyards hold up in abrasive and high-heat applications. Attach the large snap hook directly to a rated structure such as a scaffold or pipe to create an anchor point. For adequate fall clearance, you must have at least 20 ft. of clearance. Use in conjunction with a harness for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.

Made of Kevlar, these lanyards meet ASTM F887 when used with an arc flash-resistant harness. For adequate fall clearance, you must have at least 18 1/2 ft. of clearance. Use in conjunction with a harness and an anchor for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.

Dual-leg lanyard attaches to two anchors at once.

Made of steel, these durable lanyards hold up in abrasive and high-heat applications. For adequate fall clearance, you must have at least 20 ft. of clearance. Use in conjunction with a harness and an anchor for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.

Dual-leg lanyard attaches to two anchors at once.

For adequate fall clearance, you must have at least 18 1/2 ft. of clearance. Use in conjunction with a harness and an anchor for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.

Polyester/elastomer lanyards expand and contract with your movements.

Dual-leg lanyards attach to two anchors at once.

Add a seat belt to your vehicle seat for a safer ride.

Standard belts are tightened by pulling the strap.

Retractable belts retract automatically when buckled. Belts with lap and shoulder straps restrain both the lower and upper body during impact. Belts with a switch won't allow a vehicle to operate unless the belt is buckled. They include a standard automotive plug that you can cut off to expose two wire leads.

Wraparound belts, also known as endless belts, wrap completely around the seat. Buckle the belt and pull the strap to tighten. No need for mounting hardware.

Seat belt mounting bars allow equipment seats that do not have a seat belt mounting bracket to accept seat belts.

Encourage seat belt compliance by making it easy to spot when someone is not wearing a seat belt. These seat belt covers have reflective strips and come in fluorescent colors. Wrap them over a seat belt and secure with the hook-and-loop. Covers fit standard-width seat belts.

Scale wooden poles to perform inspections and maintenance.

Climbing belts work in conjunction with positioning straps to provide a leverage point for climbing. Attach the positioning strap and your fall-arrest lanyard to the metal D-rings on the belt. Belts are fixed, so they do not allow side-to-side movement of the D-rings. Belts also hold your tools while climbing. They have a glove-bag ring, a tape holder, a two-way knife snap, four suspender rings, and four tool loops. To find your trade size, measure from one hip bone around the back to the other hip bone, then add 2". For example, if the length you measure is 20", then your trade size is 22D.

Positioning straps wrap around the pole to provide support while at height, freeing both hands for work. Connect them to the D-rings on your climbing belt with the locking snap hooks. They adjust up to 2 feet in length.

Pole climbers have cushioned leather pads for comfort, wide stirrups for solid foot support, and spikes that penetrate even hard, salt-treated poles for secure climbing. Adjust the length in 1/4" increments by removing and repositioning the screws in the leg irons. To determine your length, measure from your instep to 1" below your knee.

Replacement climber pads cannot be sold to Canada due to import regulations.

Note: Pole climbing equipment is not a substitute for fall-arrest equipment. Always use pole climbing equipment in conjunction with a fall-arrest harness, lanyard, and anchor point.