Component Component |
|---|
|
|
Material Material |
|---|
|
Length Length |
|---|
|
|
Connection Type Connection Type |
|---|
|
Harness End Connection Type Harness EndConnection Type |
|---|
|
|
Attachment Style Attachment Style |
|---|
|
|
Harness Type Harness Type |
|---|
|
Specifications Met Specifications Met |
|---|
|
Housing Material Housing Material |
|---|
|
Anchor Point Attachment Style Anchor PointAttachment Style |
|---|
 |  |
| Hook Over | Wraparound |
Harness End Connector Material Harness EndConnector Material |
|---|
|
Anchor End Connector Material Anchor EndConnector Material |
|---|
|
Carabiner Material Carabiner Material |
|---|
|
Quick-Stop Fall-Arrest Lanyards
A quick-stop lanyard must be used when you have less than 18 1/2 ft. of fall clearance as it will stop your fall within a few inches. Use in conjunction with a harness and an anchor for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.
Single-leg lanyards require a carabiner to connect to a harness.
Dual-leg lanyard attaches to two anchors at once.
Use the shock-absorbing attachment (sold separately) to increase the capacity of 310-lb. polyester lanyards to 400 lbs.
Harness End Connection | Anchor End Connection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Capacity, lbs. | Material | Construction | Type | Material | Type | Material | Snap Hook Opening Size | Housing Material | Specifications Met | Each | |
Single Leg | ||||||||||||
| 6 | 400 | Polyester | Webbing | Snap Hook | Steel | Snap Hook | Steel | 3/4" | Plastic | ANSI Z359.1 | 0000000 | 0000000 |
| 9 | 310 | Polyester | Webbing | Shackle | Stainless Steel | Snap Hook | Steel | 3/4" | Aluminum, Plastic | ANSI Z359.1 | 0000000 | 000000 |
| 11 | 310 | Polyester | Webbing | Shackle | Stainless Steel | Snap Hook | Steel | 3/4" | Plastic | ANSI Z359.1 | 0000000 | 000000 |
| 15 | 420 | Stainless Steel | Wire Rope | Swivel Eye | Stainless Steel | Snap Hook | Stainless Steel | 3/4" | Plastic | ANSI Z359.14 | 0000000 | 000000 |
| 20 | 310 | Stainless Steel | Wire Rope | Swivel Eye | Steel | Snap Hook | Steel | 3/4" | Aluminum, Plastic | ANSI Z359.1 | 0000000 | 000000 |
| 20 | 420 | Nylon | Webbing | Swivel Eye | Steel | Snap Hook | Steel | 3/4" | Plastic | ANSI Z359.14 | 0000000 | 000000 |
| 30 | 310 | Stainless Steel | Wire Rope | Swivel Eye | Steel | Snap Hook | Steel | 3/4" | Aluminum, Plastic | ANSI Z359.1 | 0000000 | 00000000 |
| 50 | 420 | Stainless Steel | Wire Rope | Swivel Eye | Steel | Snap Hook | Steel | 3/4" | Aluminum, Stainless Steel | ANSI Z359.1 | 0000000 | 00000000 |
Dual Leg | ||||||||||||
| 6 | 400 | Polyester | Webbing | Pin Retainer | Steel | Snap Hook/Snap Hook | Steel | 3/4" | Plastic | ANSI Z359.1 | 0000000 | 000000 |
Quick-Stop Fall-Arrest Lanyards with Anchor Point
These lanyards form their own anchor point by attaching directly to a rated structure. A quick-stop lanyard must be used when you have less than 18 1/2 ft. of fall clearance. Use in conjunction with a harness for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.
Hook-over lanyard has a large snap hook that attaches directly to a rated structure such as a scaffold or pipe to create an anchor point.
Wraparound lanyard loops around a rated structure such as an I-beam and then attaches to itself to create an anchor point.
Harness End Connection | Anchor End Connection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Capacity, lbs. | Material | Construction | Type | Material | Type | Material | Snap Hook Opening Size | Housing Material | Specifications Met | Each | |
Hook Over Single Leg | ||||||||||||
| 6 | 400 | Polyester | Webbing | Carabiner | Steel | Snap Hook | Steel | 2 1/2" | Plastic | ANSI Z359.1 | 0000000 | 0000000 |
Wraparound Single Leg | ||||||||||||
| 7 1/2 | 400 | Polyester | Webbing | Snap Hook | Steel | Snap Hook | Steel | 3/4" | Plastic | ANSI Z359.1 | 0000000 | 000000 |
Shock-Absorbing Fall-Arrest Lanyards
 |  Dual Leg |
 |
For adequate fall clearance, you must have at least 18 1/2 ft. of clearance. Use in conjunction with a harness and an anchor for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.
Dual-leg lanyards attach to two anchors at once.
Harness End Connection | Anchor End Connection | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Lg. After Fall, ft. | Capacity, lbs. | Material | Construction | Type | Material | Type | Material | Snap Hook Opening Size | Each | |
Dual Leg | |||||||||||
| 6 | 9 1/2 | 420 | Polyester | Webbing | Snap Hook | Steel | Snap Hook/Snap Hook | Steel | 3/4" | 000000 | 0000000 |
Webbing Boom Strap Fall-Arrest Anchor Points
Attach to the arm of a bucket truck. The strap has a cinching buckle for a snug, nonslip fit.
| For Max. Dia. | Capacity, lbs. | Material | Construction | Connection Type | Features | Each | |
Wraparound | |||||||
|---|---|---|---|---|---|---|---|
| 42" | 350 | Polyester | Webbing | D-Ring | Cinching Buckle | 00000000 | 000000 |
Stationary I-Beam Fall-Arrest Anchor Points
Mount this anchor to vertical and horizontal I-beams.
For I-Beam Flange | ||||||
|---|---|---|---|---|---|---|
| Wd. | Thick. | Capacity, lbs. | Material | Connection Type | Each | |
Clamp On | ||||||
| 4" to 8" | 5/8" | 310 | Steel | D-Ring | 00000000 | 0000000 |
Bolt-On Fall-Arrest Anchor Points
Mounting Holes | |||||||
|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Material | Connection Type | Dia. | No. of | Fasteners Included | Each | |
Bolt On | |||||||
| 310 | Steel | D-Ring | 9/16" | 2 | No | 00000000 | 000000 |
Nail-On Fall-Arrest Anchor Points for Roofs
| Capacity, lbs. | Material | Connection Type | Fasteners Included | Each | |
Nail On | |||||
|---|---|---|---|---|---|
| 310 | Steel | D-Ring | No | 00000000 | 000000 |
Push-In Fall-Arrest Anchor Points for Concrete
Wedge this anchor into a drilled mounting hole—it's good for vertical and horizontal concrete applications.
| For Mounting Hole Dia. | Capacity, lbs. | Material | Connection Type | Each | |
Push In | |||||
|---|---|---|---|---|---|
| 3/4" | 310 | Stainless Steel | Ring | 00000000 | 0000000 |
Fall-Arrest Anchor Points with Winch
This system provides support when lowering workers into and retrieving them from tight spaces. Use the hand-operated winch to control lifting and lowering. You supply a harness.
The system comes with an adjustable mast and a separate portable base. For fixed-base installation, use the wall-mount or floor-mount base—weld or bolt the base to a concrete or steel structure and insert the mast into the opening.
| Wire Rope Lg., ft. | Ht. | Arm Lg. | Capacity, lbs. | Material | Snap Hook Material | Wire Rope Material | Features | Specifications Met | Each | |
| 65 | 79" to 100" | 12" to 29" | 350 | Aluminum | Steel | Galvanized Steel | Portable Base | ANSI A10.32, ANSI Z359.1 | 0000000 | 000000000 |
Fall-Arrest Harnesses for Ladder Climbing and Positioning
These versatile harnesses have one D-ring on the chest for use with ladder-climbing systems as well as one D-ring on each hip to provide a stable working position. Attach harness to a ladder-climbing system using a carabiner. Harnesses have a D-ring on the back that attaches to a lanyard for fall protection. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.
| Capacity, lbs. | Harness Material | D-Ring Location (No. of) | Size | Waist Size | Specifications Met | Each | |
Pullover Harness with Traditional Thigh Buckle | |||||||
|---|---|---|---|---|---|---|---|
| 400 | Polyester | Back (1), Chest (1), Hips (2) | One Size Fits All | 32" to 48" | ANSI Z359.1 | 0000000 | 0000000 |
Fall-Arrest Harnesses
Harnesses have a D-ring that attaches to a lanyard. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.
Polyester/elastomer harnesses expand and contract with your movements.
| Capacity, lbs. | Harness Material | D-Ring Location (No. of) | Size | Waist Size | Specifications Met | Each | |
Pullover Harness with Traditional Thigh Buckle | |||||||
|---|---|---|---|---|---|---|---|
| 400 | Polyester | Back (1); Chest (1) | One Size Fits All | 32" to 48" | ANSI Z359.1 | 0000000 | 0000000 |
Tool Lanyards
Keep your equipment close and prevent accidental drops.
| For No. of Tools | Connection Type | Capacity, lbs. | Lg. | Material | Construction | For Min. Tool Opening | Carabiner Material | Specifications Met | Each | |
| 1 | Carabiner × Elastic Loop | 10 | 35" | Nylon | Webbing | 3/8" | Aluminum | __ | 0000000 | 00000 |
| 1 | Carabiner × Elastic Loop | 15 | 33" | Nylon | Webbing | 1/4" | Aluminum | ANSI/ISEA 121 | 0000000 | 00000 |
| 1 | Carabiner × Detachable Elastic Loop | 5 | 38" | Nylon | Webbing | 3/8" | Aluminum | __ | 0000000 | 00000 |
| 1 | Carabiner × Carabiner | 10 | 35" | Nylon | Webbing | 1/4" | Aluminum | __ | 0000000 | 00000 |
| 2 | Carabiner × Carabiner × Carabiner | 15 | 35" | Nylon | Webbing | 1/4" | Stainless Steel | __ | 0000000 | 00000 |
| Replacement Detachable Elastic Loop | 0000000 | Each | 00000 |
Hard-Hat Lanyards
Attach to your hard hat to prevent accidental drops.
| Lg. | Material | Construction | Connection Type | Each | |
| 23 1/4" | Polyester/Rubber | Webbing | Elastic Strap with Cinching Buckle × Cinching Buckle | 0000000 | 00000 |
Hard-Hat Chin Straps
Hold your hard hat securely on your head with these chin straps. Clip them into the slots in your hard hat and adjust the strap length with a slider for a snug fit.
For extra comfort, use straps with chin guard. These contoured cups hug your chin and protect it from scrapes.