Framed in aluminum T-slotted extrusions, these customizable machine guards provide multiple points of attachment for other components and structures.

These panels lift on and off their posts in seconds, so you can protect machinery while providing access for maintenance.

Start with two bases and then stack rails to the desired height.

These are the same guardrails you see along roadways.

Restrict and grant access to an area—these bollards act as a strong physical barrier and have a hinge to fold flat against the ground in either direction.

Prevent damage to dock doors using these bright yellow guards, which act as a barrier and catch the eye of vehicle operators.

A two-piece design lets you wrap these guards around a column.

Place these guards over a skylight to protect against falls.

Mount near a machine to deflect debris away from the immediate area. Guards bend and twist in any direction.

Move these panels to partition workspaces and separate workers.

With an easy-to-see frame and clear panels, these partitions let you safely establish sections or distance between people in your workspace.

Shield forklift operators from rain, snow, wind, and dust while keeping a clear, unobstructed view for safety. These covers are sized to fit most forklift cabs.

Wrap these guards around grip pullers, presses, and other moving equipment to protect yourself from flying debris.

Connect rails and posts with included slip-on fittings to quickly assemble a railing.

Combine bases, rails, gates, and toeboards to create a barrier customized to your needs. Base is weighted to allow installation without drilling holes.

Slip these posts and rails together for a complete railing—no fittings required.

Create a temporary barrier around hazards such as open manholes.

Keep personnel safe when transferring material between areas with different floor heights.

No need to shut these gates behind you—springs automatically do it for you.

Provide an end point for your belt barrier.

No need for mounting hardware—these barriers have a magnetic housing and belt end to attach to metal surfaces.

To make a complete unit, team one or more belt barriers with a wall receptacle or receiver post.

Mix-and-match posts and chain to create a barrier that suits your needs.

You can fill these with water for added stability and drain when not in use for easy transport.

This barrier tape has a long-lasting woven construction.

Add panels to T-slotted framing to create machine guards, strip doors, and welding curtains.

These rails have continuous T-slots for attaching fittings. Use this versatile framing to configure machine guards, enclosures, carts, and workstations.

Use hinges to add doors, lids, and machine guards to T-slotted framing.

Route wires, cables, and tubing along T-slotted rails.

Slide drawers, panels, and doors with these tracks and rollers.

Pivots provide smooth motion at the junction between two T-slotted rails.

Add rollers to T-slotted framing to create flow rails, ball transfer tables, and other manual conveyors.

For repetitive workholding, mount these clamps to T-slotted framing to hold and release parts.

Distribute compressed air, hydraulic fluid, or water from a single supply to multiple locations.

Mount components to these load-rated bearings and track rollers to add linear motion along T-slotted rails.

Add a convenient grip to steer carts or open and close doors, windows, and drawers made of T-slotted framing.

Attach and position phones, tablets, monitors, and other displays on T-slotted rails.

Mount these bull's eye levels to workstation and table frames made of T-slotted framing for easy leveling in all directions on the horizontal plane.

Create posts of varying lengths.

In addition to being lightweight and strong, this plastic framing is nonconductive with good resistance to chemicals and salt water.

Made of 316 stainless steel, this framing has excellent resistance to chemicals and salt water.

A tab on the end of these shelf brackets fits inside the strut channel for extra stability.

Push these brackets into strut channel and tighten the included cam screws for a partially concealed connection.

Brackets mount on the outside of strut channel to allow trolley movement.

Run cable and tubing in the tightest spaces with channel that is one-quarter the height and one-half the width of regular strut channel.

A spring plus serrated grooves that grip the lip of the channel provide a more secure hold than standard strut channel nuts.

Keep a rod securely centered against the strut channel.

Create a four-sided raceway for cable, or give a more finished look to strut channel structures.

These brackets have narrow slots compatible with quick-connect clamps for securing pipe and conduit on the channel side of struts without screws or tools.

Slide the strut channel into the tube for telescoping length adjustments.

Designed to wrap around the sides of strut channel, these brackets provide a stronger hold than other strut channel brackets.

With welded ends, these short lengths of strut channel provide a finished look when mounting clamps and accessories to machines and surfaces.

Securely fasten strut channel to the floor.

Notches on these washers grip the channel to keep them in place.

Support the corners of strut channel structures.

Half the height and the same width as regular strut channel, this low-profile strut channel fits into tight spots and is compatible with many of the same brackets.

Up to two times the height of regular strut channel, this high-profile channel is stronger than regular strut channel.

Provide a stable, nonmarring base for strut channel legs.

Connect two channels to create a stacked channel.

This welded, one-piece strut channel combines two strut channels side-to-side.