These general purpose mats provide cushion to reduce the fatigue and strain of standing while working.

Thicker than standard antifatigue mats, these mats have more cushion for greater comfort.

Made of polyurethane foam, these mats are the ultimate in durability and comfort.

Durable and cushioned, these mats combine the comfort of an antifatigue sponge mat with wear-resistant construction.

These general purpose mats provide cushion to reduce the fatigue and strain of standing while working.

Designed to repel sparks and hot metal shards, these mats are for use in welding applications.

Rated for use in Fed. Spec. Class 100 and ISO Class 5 clean rooms, these mats release a low number of particles into the air.

These general purpose mats provide a walking surface in wet environments that allows liquids to drain beneath your feet.

Use these mats where drainage and slip resistance are a priority.

Rigid and lightweight, these polyethylene mats resist acids, salt, gasoline, solvents, and chemicals.

Use these greaseproof mats where grease and oil are constantly present.

Rigid mats are more durable than flexible mats, withstanding heavy loads and rough use.

These mats meet NSF/ANSI standards for use in food-processing areas.

Tested to withstand the stated dielectric test voltage, these mats protect workers from electrical shock when working around high-voltage equipment.

These mats have a smooth bottom for use on hard floor surfaces.

Spray these mats with a hose to remove mud and other debris.

These mats have an abrasive fiber surface to scrape off dirt, mud, and snow.

These mats have an abrasive scraping surface and absorb water.

This tape has an odorless, pressure-sensitive adhesive on both sides to secure mats to the floor.

Protect sensitive clean room electronics from harmful static charges. Commonly used in pharmaceutical and laboratory Fed. Std. Class 100 and ISO Class 5 clean rooms, these mats release a low number of particles into the air.

Keep feet warm in cold, drafty rooms.

Gripping teeth on the bottom hold these mats in place on carpet.

Add edging to vinyl-backed mats for a finished look.

These mats are designed to absorb shock from falling objects and protect floors as well as equipment. They stand up to prolonged loads and are often used to store heavy industrial parts.

These mats are made up of layers of adhesive-coated sheets. When the top sheet gets dirty, pull the tab to remove it and expose the next clean sheet.

With a raised disc surface that can be felt with feet and canes, these tiles alert individuals with visual impairments to an upcoming intersection or an edge of a walkway.

Prevent personnel from getting too close to dangerous equipment while it’s running. Step anywhere on these mats and they can turn on warning lights and alarms or shut down equipment.

With a smaller footprint than other switch mats, these fit in confined spaces.

Customize the length of these switches by cutting them from a 25-foot roll.

Step or press anywhere along the switch to control doors, lights, or alarms.

These narrow switches are also thin enough to be hidden under carpeting or installed anywhere space is limited.

These cable ramps handle heavy pedestrian and equipment traffic.

Curve these ramps to route cable around bends and corners in indoor areas with heavy pedestrian and equipment traffic.

Multiple channels let you separate different types of cable and cords.

These cable ramps are strong enough to withstand equipment traffic.

Cushion your knees while working on the ground.