Add numbers, abbreviations, and symbols to indicate specific hazards and the degree of hazard using these NFPA (National Fire Protection Association) signs.

The color stripes and reference chart identify the type of hazard. Write in the appropriate code numbers and list required personal protective equipment.

The illustrations on these signs help workers identify hazards at a glance.

Designate the area where machine oils, fuels, and gas cylinders are stored.

Specify the exact chemical and source of exposure to be printed on these signs.

The illustrations on these signs help workers identify restricted areas at a glance.

The illustrations on these signs help workers identify safety reminders at a glance. Use them to designate areas that require personal protective equipment, such as safety glasses, earmuffs, and face masks.

Clearly identify areas that require personal protective equipment, such as face masks, gloves, hard hats, safety glasses, and hearing protection.

These signs have the same message on each side. Place them where needed to clearly define and restrict access to dangerous areas, then fold them when not in use.

Warn against forklift traffic, mark pedestrian crossings, and provide safety reminders to drivers.

The illustrations on these signs help workers identify areas with moving vehicle hazards at a glance.

Notify workers of electrical hazards such as arc flashes, buried cable, and high-voltage equipment.

The illustrations on these signs help workers identify confined areas at a glance.

These large decals have a pebbled nonskid surface and an adhesive backing that sticks to most surfaces.

The illustrations on these signs help workers identify tripping hazards at a glance.

The illustrations on these signs help workers identify hazards at a glance.

Stack these signs when not in use. They have the same message printed on all four sides to help prevent accidents around slippery floors.

Collapse these signs when not in use. They have the same message printed on all three sides to help prevent accidents around slippery floors.

Specify the printed message you'd like to appear under the header.

To limit the spread of illness by helping people social distance, these decals have brightly-colored symbols and text that make them easy to see and understand.

For spaces where you can’t mount to a wall, these signs stand on tables or floors to remind people to social distance or wear a mask, preventing the spread of illness. Fold flat to store.

Remind your team to lock out machines during maintenance work to avoid accidental startups.

Visually identify a slow-moving vehicle.

Communicate two- or four-way stops with one freestanding stop sign.

These signs have a handle for guiding pedestrians and vehicle traffic manually.

Designate parking spaces that are accessible.

These large decals have a pebbled nonskid surface and an adhesive backing that adheres to most surfaces.

Engraved letters and beveled edges provide a polished look.

Communicate your policy regarding the possession and use of firearms on a work site.

Point personnel to first-aid equipment in case of an emergency.

Provide information about CPR, treating minor burns, and other emergency first-aid measures.

Specify the message you'd like printed on your sign.

Mark the location of fire alarms, extinguishers, and other fire safety equipment, so you can find them quickly in an emergency.

Clearly label fire hydrants to show their flow rates, if they're out of service, or write your own message.

Project messages and warnings in areas with high traffic or that require frequent cleaning.

These signs meet federal regulations for the visually impaired and help comply with the Americans with Disabilities Act (ADA) when installed properly.

Communicate smoking policies.

Mark areas where people can wait for assistance going down stairs in an emergency.

Remind employees to wash hands before returning to work.

These large decals have a pebbled nonskid surface and an adhesive backing that adheres to most surfaces.

Clearly mark areas of your facility with these signs.

Expose these signs to ambient light and they stay visible in the dark.

Illuminate exits during power failures and other emergencies—these signs have battery-powered emergency lights. The backlit message meets UL 924 regulations for visibility.

Mount these signs perpendicular to the wall to view the same message on each side.

Remind workers how to lift and carry loads safely.

Write on these signs with a dry-erase marker or use adhesive-back numbers.

Mark shelter locations for hazardous weather conditions.

Mount these signs perpendicular to the wall to view the same message on each side.

These signs are rated NEMA 4X for corrosion resistance and washdown environments.

Add these symbols to an existing label or use alone to communicate hazards at a glance.

Remind people working near conveyors about hazards and unsafe practices that can cause injuries. These labels meet CEMA Brochure No. 201 standards. They also have colors and headers that meet OSHA/ANSI standards for indicating hazards.

Indicate voltage and identify power lines, conduit, fuse boxes, switches, and other electrical equipment.

Stick these symbols to terminals to show the location of grounded wires.

Provide appropriate code numbers for hazards with these NFPA (National Fire Protection Association) labels.

A reference chart explains the NFPA (National Fire Protection Association) color and number designations for hazards. Provide the appropriate code number using the NFPA diamond.

The illustrations on these labels help workers identify flammable hazards and corrosive materials at a glance.

Clearly mark containers so you know what’s inside.

Add symbols to an existing label or use them alone to communicate the presence of hazardous materials.

The graphics on these labels identify hazardous materials and provide safety reminders.

Mark hazardous materials with standard symbols so users know to handle them with care. These labels come with stickers that have GHS pictograms, which were designed by the UN to clearly identify chemicals as flammable, toxic, corrosive, and more.

Wrap these labels around padlocks to comply with lockout/tagout procedures.

Prevent injuries from unexpected machine startups during maintenance and repair—these labels remind you to lock out equipment.

The headers and illustrations on these labels help workers identify lockout reminders at a glance.

Stick these labels onto barrier posts to point out hazards or restricted areas.

Specify the printed message you’d like to appear under the header of these labels.

Add symbols to an existing label or use them alone to communicate slippery floors, tripping hazards, or low headroom. These labels meet ISO and ANSI safety color and symbol standards, so their message is universally understood with a quick glance.

Stick these ISO symbols on existing labels or use them on their own to warn of vehicle hazards at a glance.

The illustrations on these labels help workers identify confined spaces at a glance.

Designate areas that require personal protective equipment such as safety glasses and ear plugs.

Share warnings or safety instructions with drivers. The images on these labels help them understand the message at a glance.

Identify confined spaces that require authorized entry.

Mark doors with clear instructions or information.

Clearly mark first-aid equipment so it’s easy to spot in an emergency.

Specify a custom message to identify equipment and materials, and we'll create a label for you.

When removed, the adhesive separates from the backing to reveal the words "Open" and "Void".

Tags are laminated in plastic so they hold up outdoors.

Sign and date these tags and then seal the laminating flap to protect the text from smudging and wear.

Remind workers to use lockout devices and procedures to prevent unexpected machine startups during maintenance and repair work.

Use these tags to describe equipment and lockout/tagout procedures.

Designed for use in the food industry, these tags remind workers to use lockout devices and procedures to prevent unexpected machine startups during maintenance and repair work while reducing the risk of contaminating the food.

Mark sources of water and electricity so they’re easy to find when you service equipment.

Hang these tags on a doorknob to show a room is in use or off-limits.

The color stripes on these tags identify the type of hazard. Write in the appropriate code numbers to indicate the severity.

Tags are laminated in plastic so they hold up outdoors.

Specify a message and starting number.

Specify a message and starting number.

Specify a message and starting number.

Specify a message and starting number.

Specify a message and starting number.

These tags are stamped with "SEALED" and a random number.

These tags are stamped with "SEALED" and are numbered consecutively, starting with a random number.

Mark potentially dangerous gases, batteries, and other hazardous materials.