Often used with machine guards, these switches mount to a door frame.

Delay access to hazardous areas until conditions are safe; use these switches with machines that take time to stop after they are turned off. They mount to a door frame.

Shorter and thinner than other safety limit switches, these are sized to fit tight spaces.

Stack these slim switches together, or fit them into tight spaces. They're rated IP67 for protection from temporary submersion.

These switches actuate with the slightest push for a high degree of accuracy. They're rated IP67 for protection from wet locations and temporary submersion.

Sealed actuators prevent these switches from jamming, even when exposed to sand, mud, or dirt. They're rated IP67 for protection from temporary submersion.

These switches actuate with the slightest push for a high degree of accuracy.

Often used on conveyor systems and bin filling operations, these switches have the rapid-closing action of a snap-acting switch but have a large actuator for sensing larger objects.

Prevent automatic doors from closing on a person or an object—these switches immediately turn machinery off when actuated with minimal force.

Prevent unauthorized use—these switches require coded magnets to actuate. They cannot be bypassed using ordinary magnets.

Wire contacts to an alarm system to alert when doors or windows are opened.

It takes two hands to activate these switches, minimizing the risk of accidental equipment start up.

Protected by a steel enclosure, these switches withstand tougher conditions than switches in a plastic housing. Also known as safety switches, they have quick-make/quick-break action to eliminate arcing and prolong switch life.

Install these switches in a panel cutout.

Mount these switches inside your enclosure to prevent it from opening when power is on—actuating the switch disconnects power and releases the door.

These metal plates indicate the location for turning switches off in emergency situations.