Mount these stations next to a sink—water flow is activated by swinging the unit 90° from the storage position.

No plumbing required—this station holds 16 gal. of eye wash solution.

Plug this station in and the thermostat keeps eye wash solution at a comfortable temperature in environments as cold as -32° F.

Plug this station in and the thermostat keeps water at a comfortable temperature in environments as cold as -20° F.

With a built-in eye cup, these eye washes concentrate the flow of solution over the eye.

Station comes ready to attach to your faucet. An on/off valve allows the faucet to function normally after installation.

Use these in addition to an ANSI-compliant station for areas that need immediate access to eye wash.

Mount your eye wash station over this container to capture used fluid when a floor drain isn't available.

With a large label showing where and how to activate them, these push handles help your eye wash station meet ANSI standards.

Stations are FM approved for Class I, Division 2, Groups B, C, and D hazardous locations. They are heated and can be fully exposed to the elements without freezing in temperatures as low as -50° F.

You can install the shower head and eye wash in an unheated area, but the valve must be installed indoors to keep water flowing at a comfortable temperature.

Bolt in the floor-mount flange and connect the pipe to your facility's plumbing on the top or side to use these freestanding stations.