Salt Water Flexible Impeller Pumps

	For Use With For Use With

	Maximum Flow Rate Maximum Flow Rate

	Voltage Voltage

	Power Source Power Source

	Discharge Pipe Size Discharge Pipe Size

	Housing Material Housing Material

	Pump Type Pump Type

	Intake Pipe Size Intake Pipe Size

	Power Power

	Phase Phase

Single

Three

	Maximum Temperature Maximum Temperature

	Duty Cycle Duty Cycle

Continuous

Intermittent

	Maximum Feet of Head Maximum Feet of Head

	Impeller Material Impeller Material

Stainless Steel

Plastic

Rubber

	Intake Connection Style Intake Connection Style

	Discharge Connection Type Discharge Connection Type

	Overall Height Overall Height

	Intake Connection Type Intake Connection Type

Pipe

Inlet

Hose

	Pump Activation Type Pump Activation Type

	Current Current

	Electrical Connection Type Electrical Connection Type

Hardwire

Plug

	RoHS (Restriction of Hazardous Substances) RoHS (Restriction of Hazardous Substances)

RoHS Compliant

RoHS Compliant with
Exemptions

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

Forward

How can we improve?

73 Products

About Sump, Water-Removal, Condensate, and Submersible Pumps

How to Prime Your Pump

How to Determine Feet of Head

About Process Pumps

These pumps have the best chemical resistance of all our circulation pumps. Instead of a shaft seal, they use magnets to turn the impeller, reducing wear and leakage. The motor is totally enclosed fan-cooled (TEFC) for use in dusty, dirty, and damp environments. Pumps are gravity fed and require an elevated liquid source. Do not run dry or use with solids.

Pumps that cannot be sold to Canada are restricted due to energy efficiency regulations.

Note: If flow control is needed, place valves or reducers on the discharge side; never restrict the inlet of a pump with a valve or reducer.

Pumps
	Flow Rate, gpm										Pipe Size		Overall						Maintenance Kits		Replacement Impellers
Max. Flow Rate, gpm	@ 10 ft. of Head	@ 20 ft. of Head	@ 30 ft. of Head	@ 40 ft. of Head	@ 50 ft. of Head	@ 60 ft. of Head	Max. ft. of Head	Max. Viscosity, cP	hp	Current, A	Intake (Gender)	Discharge (Gender)	Lg.	Wd.	Ht.	Cannot Be Sold To		Each		Each		Each
120V AC, 240V AC, Single Phase—Without Thermal Overload Protection
Hardwire
23	__	20	10	__	__	__	35	__	1/4	2.1/4.1	1 (Female)	1 (Female)	14 3/8"	5 1/8"	7 7/8"	__	0000000	000000000	00000000	000000	00000000	0000000
26	__	26	12	__	__	__	35	__	1/3	3.2/6.8	1 (Female)	1 (Female)	16 5/16"	6 1/8"	8 3/16"	__	0000000	00000000	00000000	00000	00000000	000000
240V AC, 460V AC, Three Phase—Without Thermal Overload Protection
Hardwire
57	57	53	30	25	__	__	45	__	1/2	1.1/2.2	1 1/2 (Female)	1 1/2 (Female)	18 3/8"	8 7/8"	11 5/16"	__	0000000	00000000	00000000	00000	00000000	000000
90	90	84	74	61	49	__	70	__	1	1.5/3	1 1/2 (Female)	1 1/2 (Female)	18 7/8"	6 5/16"	10 1/8"	__	0000000	00000000	00000000	00000	00000000	000000
120V AC, 208–240V AC, Single Phase—With Thermal Overload Protection
Hardwire
38	36	32	27	21	__	__	49	5	1/2	7.5/3.7-3.7	1 (Female)	3/4 (Male)	15 1/2"	9"	8 1/4"	__	0000000	00000000	00000000	0000	00000000	000000
53	53	46	40	33	23	2	60	5	1	9.2/6.3-4.6	1 1/2 (Female)	1 (Male)	17 13/16"	9 1/8"	8 3/16"	__	0000000	00000000	00000000	0000	00000000	000000
208–240V AC, 460V AC, Three Phase—Without Thermal Overload Protection
Hardwire
30	31	26	20	7	__	__	41	5	1/3	0.6/1.3-1.2	1 (Female)	3/4 (Male)	15 1/16"	9 1/4"	7 3/8"	__	0000000	000000	00000000	0000	00000000	000000
38	36	32	27	21	__	__	49	5	1/2	1.7/1.7-0.8	1 (Female)	3/4 (Male)	15 1/16"	9 1/8"	7 3/16"	__	0000000	00000000	00000000	0000	00000000	000000
53	53	46	40	33	23	2	60	5	1	1.1/3.3-2.2	1 1/2 (Female)	1 (Male)	16 9/16"	9 1/8"	7 3/8"	__	0000000	00000000	00000000	0000	00000000	000000
82	82	82	81	80	71	61	85	5	2	2.4/4.9-4.8	2 (Male)	1 1/2 (Male)	20 11/16"	10 3/8"	10"	Canada	0000000	00000000	00000000	00000	00000000	00000000
120	120	120	120	112	105	92	95	5	3	3.9/8-7.8	2 (Male)	1 1/2 (Male)	24 3/8"	11 1/2"	10 1/2"	__	0000000	00000000	00000000	00000	00000000	00000000

Stainless Steel Circulation Pumps for Chemicals

A 316 stainless steel housing sealed with fluoroelastomer resists mild chemicals and acids, such as coolant, oil, and phosphoric acid. These pumps have a totally enclosed fan-cooled (TEFC) motor for use in dusty, dirty, and damp environments. They are gravity fed and require an elevated liquid source. Do not run dry or use with solids.

Note: If flow control is needed, place valves or reducers on the discharge side; never restrict the inlet of a pump with a valve or reducer.

Pumps
	Flow Rate, gpm												Intake (NPT)		Discharge (NPT)		Overall					Replacement Impellers
Max. Flow Rate, gpm	@ 20 ft. of Head	@ 30 ft. of Head	@ 40 ft. of Head	@ 50 ft. of Head	@ 60 ft. of Head	@ 70 ft. of Head	Max. ft. of Head	Max. Pressure, psi	Max. Solids Dia.	Max. Viscosity, cP	hp	Current, A	Pipe Size	Gender	Pipe Size	Gender	Lg.	Wd.	Ht.		Each		Each
120/240V AC, Single Phase—With Thermal Overload Protection
Hardwire
32	__	22	10	__	__	__	44	100	1/8"	50	1/3	5.6/2.8	3/4	Female	1/2	Female	15"	9"	7 1/2"	0000000	0000000	0000000	0000000
32	__	32	32	20	__	__	62	100	3/32"	50	3/4	10.6/5.3	1 1/4	Female	3/4	Female	16"	9"	7 3/4"	0000000	000000	0000000	000000
36	__	30	22	__	__	__	54	100	1/8"	50	1/2	7.6/3.8	3/4	Female	1/2	Female	15"	9"	7 1/2"	0000000	000000	0000000	000000
38	__	33	27	18	__	__	59	100	1/8"	50	3/4	10.6/5.3	3/4	Female	1/2	Female	15"	9"	7 1/2"	0000000	000000	0000000	000000
90	82	63	35	__	__	__	60	100	3/32"	50	1	12.6/6.3	1 1/2	Female	1 1/4	Female	16"	9"	8 3/4"	0000000	00000000	0000000	000000
240/460V AC, Three Phase—With Thermal Overload Protection
Hardwire
75	47	15	__	__	__	__	34	100	3/16"	50	1	2.9/1.4	1 1/2	Female	1 1/4	Female	16"	9"	8 3/4"	0000000	00000000	0000000	000000
95	80	55	20	__	__	__	49	100	3/16"	50	1 1/2	3.9/2	1 1/2	Female	1 1/4	Female	16"	9"	8 3/4"	0000000	00000000	0000000	000000
110	100	80	58	28	__	__	70	100	3/32"	50	1 1/2	3.9/2	1 1/2	Female	1 1/4	Female	16"	9"	8 3/4"	0000000	00000000	0000000	000000
115	__	__	55	__	__	__	52	100	3/16"	50	2	5.3/2.7	2	Female	1 1/2	Female	16"	9"	8 3/4"	0000000	00000000	0000000	000000
130	__	__	__	90	60	__	82	100	3/32"	50	2	5.3/2.7	2	Female	1 1/2	Female	16"	9"	8 3/4"	0000000	00000000	0000000	000000
130	__	__	__	95	55	__	79	100	3/16"	50	3	7.6/3.8	2	Female	1 1/2	Female	16"	9"	8 3/4"	0000000	00000000	0000000	000000
140	__	__	__	__	85	55	88	100	3/32"	50	3	7.6/3.8	2	Female	1 1/2	Female	16"	9"	8 3/4"	0000000	00000000	0000000	000000

Maintenance Kit for Pumps with 1/8" Max. Solids Dia.	0000000	Each	0000000
Maintenance Kit for Pumps with 3/16" or 3/32" Max. Solids Dia.	0000000	Each	000000

Self-Priming Circulation Pumps without Motor for Oil

Use these pumps to move lubricating oil such as hydraulic and motor oil. Also known as flexible impeller pumps, they create a suction force that can draw liquid upward to fill the pump chamber when your liquid source is below the pump. The impeller resists clogging and wear. Select a spark-free air motor for hazardous environments or attach an electric motor with a speed reducer or a belt pulley to alter the pump speed.

Repair kits (sold separately) include components such as impellers, O-rings, and seal lips.

Note: Pumps must be filled with liquid before use. They need a constant flow of liquid and cannot run dry.

For technical drawings and 3-D models, click on a part number.

						Intake (NPT)		Discharge (NPT)		Shaft			Overall
Max. Flow Rate, gpm	Max. Ft. of Head, ft.	Max. Pressure, psi	Max. Viscosity	Temp. Range, °F	Required hp	Gender	Pipe Size	Gender	Pipe Size	Dia.	Lg.	Ctr.-to-Base Lg.	Ht.	Lg.	Wd.		Each
For 500 rpm-2,100 rpm Motor Speed
11.5	50	21	Not Rated	50° to 180°	1/3 hp	Female	1/2	Female	1/2	5/8"	1 1/8"	1 15/16"	3 13/16"	4 1/2"	4 1/8"	0000000	0000000
25	50	26	Not Rated	50° to 180°	3/4 hp	Female	1	Female	1	5/8"	2 1/4"	1 7/8"	3 9/16"	6 3/8"	4 3/4"	0000000	000000

Maintenance Kit for Pump with 25 gpm Max. Flow Rate	0000000	Each	0000000
Maintenance Kit for Pump with 11.5 gpm Max. Flow Rate	0000000	Each	00000

Self-Priming Circulation Pumps without Motor for Water

Also known as flexible impeller pumps, these create a suction force that can draw liquid upward to fill the pump chamber when your liquid source is below the pump. The impeller resists clogging and wear. Select a spark-free air motor for hazardous environments or attach an electric motor with a speed reducer or a belt pulley to alter the pump speed.

Repair kits (sold separately) include components such as impellers, O-rings, and seal lips.

Note: Pumps must be filled with liquid before use. They need a constant flow of liquid and cannot run dry.

For technical drawings and 3-D models, click on a part number.

						Intake (NPT)		Discharge (NPT)		Overall			Shaft
Max. Flow Rate, gpm	Max. ft. of Head	Max. Pressure, psi	Max. Viscosity	Temp. Range, °F	Required hp	Gender	Pipe Size	Gender	Pipe Size	Ht.	Lg.	Wd.	Dia.	Lg.	Ctr.-to-Base Lg.		Each
For 500 rpm-2,100 rpm Motor Speed
13	60	26	Not Rated	50° to 180°	1/3	Female	1/2	Female	1/2	3 13/16"	4 1/2"	4 1/8"	5/8"	1 1/8"	1 15/16"	0000000	0000000
27.9	60	26	Not Rated	50° to 180°	3/4	Female	1	Female	1	3 9/16"	6 3/8"	4 3/4"	5/8"	2 1/4"	1 7/8"	0000000	000000

Maintenance Kit for Pump with 27.9 gpm Max. Flow Rate	0000000	Each	0000000
Maintenance Kit for Pump with 13 gpm Max. Flow Rate	0000000	Each	00000

Compact Water-Removal Pumps

Also known as bilge pumps, these remove fresh and salt water from spots where other pumps don’t fit. They have an internal sensor, so they turn on when they detect water and turn off when the water is removed. Pumps are fully submersible. They are gravity fed and require an elevated liquid source to fully fill the pump before turning on.

Pumps for 12 volts DC work with 12-volt batteries.

Pumps for 120 volts AC are for use in debris-free water.

12V DC, Single Phase

12 Volts DC

Max. Flow Rate, gpm								Discharge		Overall
@ 5 Ft. of Head	@ 10 Ft. of Head	Max. Ft. of Head, ft.	Removes Water Down To	Temp. Range, °F	Sensor Time Interval	Horsepower	Current, A	For Tube ID	Gender	Dia.	Ht.		Each
ABS Plastic Housing
Hardwire with 2 ft. Cord
5	1	11	1/4"	30° to 140°	2.5 min.	Not Rated	1.6	3/4"	Male	3"	4"	0000000	000000
10	3	10	1/4"	30° to 140°	2.5 min.	Not Rated	3.7	1", 1 1/8"	Male	3"	5"	0000000	000000

120V AC, Single Phase

120 Volts AC

Max. Flow Rate, gpm								Discharge			Overall
@ 5 Ft. of Head	@ 10 Ft. of Head	Max. Ft. of Head, ft.	Removes Water Down To	Temp. Range, °F	Sensor Time Interval	Horsepower	Current	Pipe Size	Thread Type	Gender	Dia.	Ht.	Includes		Each
ABS Plastic Housing
Plug with 8 ft. Cord
20	13	18	1"	40° to 140°	2.5 min.	Not Rated	Not Rated	3/4	NPT	Male	5"	8"	Garden Hose Adapter	0000000	0000000
Plug with 24 ft. Cord
20	13	18	1"	40° to 140°	2.5 min.	Not Rated	Not Rated	3/4	NPT	Male	5"	8"	Garden Hose Adapter	0000000	000000

Harsh-Environment Self-Priming Water-Removal Pumps

This pump has a totally enclosed nonventilated (TENV) motor that is cooled by the liquid being pumped. Also known as a flexible impeller pump, it creates a suction force that can draw liquid upward to fill the pump chamber when your liquid source is below the pump. Mount up to 6 feet above your liquid source. Pump can pass solids up to 1/4" in diameter without clogging, so there’s no need to filter sediment and debris. A handle makes it convenient for on-the-go removal of bilge water, waste oil, and spills. Pump can also be used to cool marine engines and drain liquid from holding tanks.

Note: Pump must be filled with liquid before use. It needs a constant flow of liquid and cannot run dry.

									Overall
Max. Flow Rate, gpm	Max. Ft. of Head, ft.	Max. Solids Dia.	Max. Viscosity, cP	Temp. Range, °F	Horsepower	Current, A	Intake Size	Discharge Size	Ht.	Wd.	Lg.		Each
120V AC, Single Phase—With Thermal Overload Protection
Plug with 8 ft. Cord
5 4/5	30	1/4"	125	60° to 180°	1/4 hp	4.2	1/2 NPT Female, 3/4 GHT Male	1/2 NPT Female, 3/4 GHT Male	9"	5 5/8"	7 3/8"	0000000	0000000

Battery-Operated Water-Removal Pumps

Remove water in locations without power with these battery-operated pumps. Do not run dry.

Continuous duty pumps attach to a 12-volt battery. They are gravity fed and require an elevated liquid source to fully fill the pump before turning on.

For technical drawings and 3-D models, click on a part number.

Continuous Duty Pumps

Continuous Duty

Max. Flow Rate, gpm										Discharge		Overall
@ 4 Ft. of Head	@ 5 Ft. of Head	@ 8 Ft. of Head	@ 10 Ft. of Head	@ 15 Ft. of Head	@ 20 Ft. of Head	Max. Flow Rate	Max. Ft. of Head, ft.	Temp. Range, °F	Current, A	For Tube OD	Gender	Ht.	Wd.	Lg.		Each
45	42	28	25	13	__	65 gpm	22	30° to 120°	20	2"	Female	10 1/2"	5 1/2"	7"	0000000	0000000
92	83	57	51	28	8	133 gpm	24	30° to 120°	30	3"	Female	8 1/2"	12"	13 1/2"	0000000	000000

Hand-Operated Water-Removal Pumps

Install these pumps right in your line and engage the lever handle to start pumping. They have few moving parts that can fail for an extended service life. Pumps are gravity fed and require an elevated liquid source to fully fill the pump before turning on. Do not run dry.

					Intake			Discharge			Overall
Max. Flow Rate, oz./stroke	Max. Ft. of Head, ft.	Max. Viscosity, cP	Max. Solids Dia.	Temp. Range, °F	For Hose ID	Hose Connection Type	Gender	For Hose ID	Hose Connection Type	Gender	Ht.	Wd.	Lg.		Each
14	35	100,000	1/8"	35° to 150°	1"	Barbed	Male	1"	Barbed	Male	4 3/8"	4 3/8"	12 3/4"	0000000	000000
17	35	100,000	1/8"	35° to 150°	1 1/2"	Barbed	Male	1 1/2"	Barbed	Male	4 1/4"	4 3/8"	13 1/8"	0000000	000000

Corrosion-Resistant Gasoline-Powered Water-Removal Pumps

Built with high-chromium stainless steel components, this pump stands up to salt water with up to 25% sand by volume and resists wear caused by abrasive particles. Fill the fuel tank with gasoline to remove water at sites without power. Pump is self-priming, which means it creates a suction force to draw liquid upward and fill the pump chamber. Mount up to 20 feet above your liquid source. Pump has a pull-start engine. It is not submersible. This pump cannot be sold to Canada due to import regulations.

Wheel kits (sold separately) include two 10" diameter wheels, hardware, and fasteners.

Note: Pump must be filled with liquid before use. It needs a constant flow of liquid and cannot run dry.

Max. Flow Rate, gpm										Intake			Discharge			Overall
@ 20 Ft. of Head	@ 50 Ft. of Head	@ 70 Ft. of Head	@ 90 Ft. of Head	Max. Feet of Head, ft.	Max. Solids Dia.	Removes Water Down To	Tank Cap., qt.	Temp. Range, °F	Horsepower	Pipe Size	Thread Type	Gender	Pipe Size	Thread Type	Gender	Ht.	Wd.	Lg.	Cannot Be Sold To		Each
153	125	93	58	98	1/2"	10 ft.	3.8	40° to 160°	5 hp	2	NPT	Female	2	NPT	Female	20"	20"	25"	Canada	0000000	000000000

Wheel Kit

00000000

Each

0000000

Hose Kits

Includes		Each
20 ft. of PVC Suction Hose (2 NPS Male × 2 NPS Female) 50 ft. of PVC Discharge Hose (2 NPS Male × 2 NPS Female) Suction Strainer Two Steel Adapters (2 NPS Male × 2 NPT Male)	0000000	0000000

Submersible Pumps for Salt Water

Circulate salt water in submerged and open-air applications. These pumps use magnets to turn the impellers so there is no shaft seal to wear out. They must be wired to a plug (not included) to activate. Do not run dry.

Max. Flow Rate, gpm						Intake			Discharge			Overall
@ 1 Ft. of Head	@ 5 Ft. of Head	Max. Ft. of Head, ft.	Temp. Range, °F	Horsepower	Current, A	Pipe Size	Thread Type	Gender	Pipe Size	Thread Type	Gender	Ht.	Wd.	Dp.		Each
120V AC, Single Phase—With Thermal Overload Protection
Hardwire
5	3.8	13	35° to 130°	1/50 hp	0.9	3/8 × 3/4	NPT × NPT	Female × Male	1/4	NPT	Male	4 1/8"	6 1/8"	4 7/8"	00000000	0000000
8.5	8	19	35° to 130°	1/20 hp	2	3/4	NPT	Female	1/2	NPT	Male	4 7/8"	7 3/8"	4 3/4"	00000000	000000

Email Us

About Sump, Water-Removal, Condensate, and Submersible Pumps

How to Prime Your Pump

How to Determine Feet of Head

About Process Pumps

Extended-Life Plastic Circulation Pumps for Chemicals

Stainless Steel Circulation Pumps for Chemicals

Self-Priming Circulation Pumps without Motor for Oil

Self-Priming Circulation Pumps without Motor for Water

Compact Water-Removal Pumps

Harsh-Environment Self-Priming Water-Removal Pumps

Battery-Operated Water-Removal Pumps

Hand-Operated Water-Removal Pumps

Corrosion-Resistant Gasoline-Powered Water-Removal Pumps

Submersible Pumps for Salt Water