We will reply to your message within an hour.
Extract samples of thick liquids, such as oil, with a maximum viscosity of 100 cP.
These samplers are cleaned and bagged in a Class 7 clean room. Each bag is marked with a lot number. Use these samplers to extract thick liquids, such as oil, with a maximum viscosity of 100 cP.
Often used to collect environmental water samples, these samplers are cleaned and packaged in accordance with EPA protocol B.
To prevent contaminating samples, these samplers are sterilized by gamma irradiation and individually bagged. Throw them away after you collect and transfer liquid to avoid cross contamination.
Collect liquid samples from drums, tanks, and other containers.
Lower these samplers into large tanks with a chain or cable to collect samples from the bottom. They are also known as bomb samplers.
Pump the handle to draw liquid out of a tank or drum through a hose into sample bottles. Only the hose and hose weight come into contact with the liquid, reducing the possibility of cross contamination.
Sterilized so they won’t contaminate your samples or lines, these liquid samplers are often used in food processing, pharmaceutical, and biotech applications.
Use this multi-layer sampler once and then throw away to reduce the risk of cross contamination.
Puncture bags of powders and bulk materials with the pointed tip, then twist the handle to collect samples from multiple layers.
These samplers are cleaned and bagged in a Class 7 clean room. Each bag is marked with a lot number.
Use the pointed blade to pierce bags to collect samples. Each sampler is cleaned and bagged in a Class 7 clean room. Each bag is marked with a lot number.
Press the button to fill the tip with a small quantity of powder. These samplers are also known as powder thieves.
Collect and measure buildup from the bottom of oil tanks, septic tanks, wastewater lagoons, and other areas. Unlike other samplers that only hold liquids, these samplers can draw in solids, too.
Puncture bags with the pointed tip to collect and transfer samples of powder and bulk materials.
Pick a handle, snap on a container, and you’re ready to scoop samples. These dippers have a telescoping handle, so you can reach vats, tanks, and ponds from feet away.
Made from PTFE plastic, these dippers are more chemical resistant than other plastic dippers.
Cleaned and individually bagged, these dippers reduce the risk of cross-contaminating samples.
Reach into large tanks and vats with these dippers with handles from 36" to 144" long.
Gather small amounts of sample material. These sets include four spoon sizes.
Scoop up small amounts of sample material.
Store flat, then fold the sides up to make a spoon.
Scoop up to a cup of ingredients for your food processing line.
Measure ingredients for your food processing line.
Quickly seal your sample for transport—these scoops screw directly into the included bottle to reduce the risk of contamination.
With a tighter tolerance than plastic syringes, these glass syringes are better at dispensing small, precise samples and leaving little left over.
Dispense corrosive and aggressive liquids with these syringes. They're made of stainless steel, so they're not only highly chemical resistant but also extremely durable—they're our longest-lasting syringes.
Collect gas and liquid samples without worrying about evaporation or leaks. These syringes have a locking valve that keeps your sample secure.
A turn of the threaded plunger dispenses extremely small quantities—as small as a speck of dust.
Hold these syringes like a pencil and press the trigger for controlled dispensing without hand fatigue.
Convert an everyday syringe into a gas sampling syringe. These valves allow you to collect, transport, and store gas samples without worrying about evaporation or leaks.
A thumbwheel on these spatulas creates small vibrations to dispense tiny amounts of liquids or powder. This makes them a great choice to transfer material bit by bit into a weighing dish.
Reach into beakers and other containers with narrow openings—these spatulas have a blade that is no more than 7/8" wide.
Cleaned and bagged in a Class 8 clean room, these spatulas won’t contaminate your samples.
Slice, spread, and smooth samples with these knives, then toss them when you’re done to avoid cross contamination.
Break down clumps and scrape stubborn collections of powder from bottle edges and corners.
Take liquid samples in sanitary environments—these sampling valves have a hygienic design, so they’re commonly used in breweries and wineries.
To test water quality without interrupting flow, drain a small amount of liquid through the sampling outlet.
Often installed on petroleum loading arms to test fuel quality without interrupting flow, these valves are fire-tested to meet American Petroleum Institute (API) 607, Edition 5, for securely isolating fluid and preventing the spread of fire.
An audible alarm and warning light alert you to the presence of propane, methane, hydrogen, and carbon monoxide. This detector has a relay for connection to auxiliary alarm systems.
Use the probe to test the air in a hazardous area before entering. Great for confined spaces.
When this detector senses high levels of combustible and toxic gases, it alerts you with an audible alarm, warning light, and vibrating alarm.
When your work area has too much or too little oxygen, these detectors alert you with an audible alarm, warning light, and vibrating alarm.
Measure and display real-time indoor ventilation quality.
Check your indoor air quality (IAQ) by measuring the amount of particles present. These counters are often used to monitor dust levels in workshops, check for particles in classrooms, and measure filter efficiency in HVAC systems.
Weigh liquids, powders, or crystals as you transfer them from one container to another with these spoons.
Access the inside of lines, so you can vent pressure, drain liquid, or take samples. Made of black-coated steel, these bleed rings should be used in dry environments to prevent rusting.
Create an access point in systems where corrosion is a concern. Made of stainless steel, these bleed rings resist rusting.
Keep equipment running and working conditions safe—these modules add air quality tracker capabilities to your development board.