For Use With For Use With |
|---|
|
For Holding For Holding |
|---|
|
Maximum Speed Maximum Speed |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Arbor Hole Arbor Hole |
|---|
|
For Manufacturer Model Number For ManufacturerModel Number |
|---|
|
|
Tire Hardness Tire Hardness |
|---|
|
About Sanding Abrasives
More
Sanding Sleeve Drums for Hand-Held Power Tools
Slide a sanding sleeve on the drum and tighten the nut or screw to securely hold the sleeve. Secure the shank into the collet or chuck of your tool. A drum is required to use a sanding sleeve.
For technical drawings and 3-D models, click on a part number.
Drum | ||||||
|---|---|---|---|---|---|---|
| Dia. | Lg. | Shank Dia. | Drum Material | Max. Speed, rpm | Each | |
| 1/4" | 1/2" | 1/8" | Rubber | 30,000 | 0000000 | 00000 |
| 1/4" | 3/4" | 1/8" | Rubber | 22,000 | 0000000 | 0000 |
| 1/4" | 1" | 1/8" | Rubber | 20,000 | 0000000 | 0000 |
| 3/8" | 1/2" | 1/8" | Rubber | 30,000 | 0000000 | 0000 |
| 3/8" | 1" | 1/8" | Rubber | 18,000 | 0000000 | 0000 |
| 1/2" | 1/2" | 1/8" | Rubber | 30,000 | 000000 | 0000 |
| 1/2" | 1/2" | 1/4" | Rubber | 30,000 | 0000000 | 0000 |
| 1/2" | 3/4" | 1/8" | Rubber | 18,000 | 0000000 | 0000 |
| 1/2" | 3/4" | 1/4" | Rubber | 25,000 | 0000000 | 0000 |
| 1/2" | 1" | 1/4" | Rubber | 20,000 | 0000000 | 0000 |
| 1/2" | 1 1/2" | 1/4" | Rubber | 14,000 | 0000000 | 0000 |
| 1/2" | 2" | 1/4" | Rubber | 10,000 | 0000000 | 0000 |
| 5/8" | 1/2" | 1/4" | Rubber | 27,000 | 0000000 | 0000 |
| 5/8" | 1" | 1/4" | Rubber | 19,000 | 0000000 | 0000 |
| 3/4" | 1/2" | 1/4" | Rubber | 27,000 | 0000000 | 0000 |
| 3/4" | 3/4" | 1/4" | Rubber | 24,000 | 0000000 | 0000 |
| 3/4" | 1" | 1/4" | Rubber | 19,000 | 0000000 | 0000 |
| 3/4" | 1 1/2" | 1/4" | Rubber | 12,000 | 0000000 | 0000 |
| 3/4" | 2" | 1/4" | Rubber | 9,000 | 0000000 | 0000 |
| 1" | 1/2" | 1/4" | Rubber | 18,000 | 0000000 | 0000 |
| 1" | 3/4" | 1/4" | Rubber | 15,000 | 0000000 | 0000 |
| 1" | 1" | 1/4" | Rubber | 15,000 | 0000000 | 0000 |
| 1" | 1 1/2" | 1/4" | Rubber | 10,000 | 0000000 | 0000 |
| 1" | 2" | 1/4" | Rubber | 8,000 | 0000000 | 0000 |
| 1" | 3" | 1/4" | Rubber | 5,000 | 0000000 | 0000 |
| 1 1/4" | 1" | 1/4" | Rubber | 14,000 | 0000000 | 0000 |
| 1 1/4" | 2" | 1/4" | Rubber | 7,000 | 0000000 | 0000 |
| 1 1/2" | 1" | 1/4" | Rubber | 14,000 | 0000000 | 0000 |
| 1 1/2" | 1 1/2" | 1/4" | Rubber | 10,000 | 0000000 | 0000 |
| 1 1/2" | 2" | 1/4" | Rubber | 7,000 | 0000000 | 0000 |
| 2" | 1" | 1/4" | Rubber | 11,000 | 0000000 | 0000 |
| 2" | 1 1/2" | 1/4" | Rubber | 8,000 | 0000000 | 0000 |
| 2" | 2" | 1/4" | Rubber | 6,000 | 0000000 | 0000 |
| 3" | 1" | 1/4" | Rubber | 3,000 | 0000000 | 00000 |
| 3" | 1" | 3/8" | Rubber | 3,000 | 0000000 | 00000 |
| 3" | 2" | 1/4" | Rubber | 3,000 | 0000000 | 00000 |
| 3" | 2" | 3/8" | Rubber | 3,000 | 0000000 | 00000 |
| 3" | 3" | 3/8" | Rubber | 3,000 | 000000 | 00000 |
Quick-Change Sanding Sleeve Drums for Hand-Held Power Tools
No tools required—twist the drum head by hand to tighten the sanding sleeve to the drum. Secure the shank into the collet or chuck of your tool. A drum is required to use a sanding sleeve.
For technical drawings and 3-D models, click on a part number.
Drum | ||||||
|---|---|---|---|---|---|---|
| Dia. | Lg. | Shank Dia. | Drum Material | Max. Speed, rpm | Each | |
| 1/2" | 1/2" | 1/8" | Rubber | 30,000 | 00000000 | 00000 |
| 1/2" | 1/2" | 1/4" | Rubber | 30,000 | 00000000 | 0000 |
| 1/2" | 3/4" | 1/4" | Rubber | 25,000 | 00000000 | 0000 |
| 1/2" | 1" | 1/4" | Rubber | 20,000 | 00000000 | 0000 |
| 1/2" | 1 1/2" | 1/4" | Rubber | 14,000 | 00000000 | 0000 |
| 1/2" | 2" | 1/4" | Rubber | 10,000 | 00000000 | 0000 |
| 5/8" | 1/2" | 1/4" | Rubber | 27,000 | 00000000 | 0000 |
| 5/8" | 1" | 1/4" | Rubber | 19,000 | 00000000 | 0000 |
| 3/4" | 1/2" | 1/4" | Rubber | 27,000 | 00000000 | 0000 |
| 3/4" | 3/4" | 1/4" | Rubber | 24,000 | 00000000 | 0000 |
| 3/4" | 1" | 1/4" | Rubber | 19,000 | 00000000 | 0000 |
| 3/4" | 1 1/2" | 1/4" | Rubber | 12,000 | 00000000 | 0000 |
| 3/4" | 2" | 1/4" | Rubber | 9,000 | 00000000 | 0000 |
| 1" | 1/2" | 1/4" | Rubber | 18,000 | 00000000 | 0000 |
| 1" | 3/4" | 1/4" | Rubber | 15,000 | 00000000 | 0000 |
| 1" | 1" | 1/4" | Rubber | 15,000 | 00000000 | 0000 |
| 1" | 1 1/2" | 1/4" | Rubber | 10,000 | 00000000 | 0000 |
| 1" | 2" | 1/4" | Rubber | 8,000 | 00000000 | 0000 |
| 1" | 3" | 1/4" | Rubber | 5,000 | 00000000 | 00000 |
| 1 1/4" | 1" | 1/4" | Rubber | 14,000 | 00000000 | 0000 |
| 1 1/4" | 2" | 1/4" | Rubber | 7,000 | 00000000 | 0000 |
| 1 1/2" | 1" | 1/4" | Rubber | 14,000 | 00000000 | 0000 |
| 1 1/2" | 1 1/2" | 1/4" | Rubber | 10,000 | 00000000 | 0000 |
| 1 1/2" | 2" | 1/4" | Rubber | 7,000 | 00000000 | 0000 |
| 2" | 1" | 1/4" | Rubber | 11,000 | 00000000 | 0000 |
| 2" | 1 1/2" | 1/4" | Rubber | 8,000 | 00000000 | 0000 |
| 2" | 2" | 1/4" | Rubber | 6,000 | 00000000 | 0000 |
| 3" | 1" | 1/4" | Rubber | 3,000 | 00000000 | 00000 |
| 3" | 1" | 3/8" | Rubber | 3,000 | 00000000 | 00000 |
| 3" | 2" | 1/4" | Rubber | 3,000 | 00000000 | 00000 |
| 3" | 2" | 3/8" | Rubber | 3,000 | 00000000 | 00000 |
| 3" | 3" | 3/8" | Rubber | 3,000 | 00000000 | 00000 |
Flap Sanding Sleeve Drums for Hand-Held Power Tools
Slide a flap sanding sleeve on the drum and twist the drum by hand to secure the sleeve. The shank on these drums installs directly into the collet of a grinder or the chuck on a hand-held drill. A drum is required to use a sanding sleeve.
Sanding Sleeve Drums for Dremel Hand-Held Power Tools
This drum is required to use a sanding sleeve with a Dremel grinder. Slide a sleeve on the drum and tighten the screw to expand the drum to securely hold the sleeve. Install the shank into the grinder’s collet.
Drum | ||||||||
|---|---|---|---|---|---|---|---|---|
| Dia. | Lg. | Shank Dia. | Drum Material | Max. Speed, rpm | Includes | For Manufacturer Model Number | Each | |
Dremel | ||||||||
| 1/2" | 1/2" | 1/8" | Rubber | 5,000 | One 60 Grit Sanding Sleeve | 100-N/7, 285, 3000-1/24, 3965-02, 4000-2/30, 7800-02, 8000, 8100-N/21, 8200 | 0000000 | 00000 |
Sanding Sleeve Drums for Straight Shafts
Mount a sanding sleeve to the straight shaft of a bench or pedestal grinder using one of these drums. Slide a sleeve on the drum and tighten the nut to securely hold the sleeve. Drums are required for the use of sanding sleeves.
For technical drawings and 3-D models, click on a part number.
Drum | |||||||
|---|---|---|---|---|---|---|---|
| Dia. | Lg. | For Shaft Dia. | Drum Material | Max. Speed, rpm | Includes | Each | |
| 2" | 2" | 1/2" | Rubber | 6,000 | Set Screws | 0000000 | 000000 |
| 3" | 1" | 1/2" | Rubber | 3,000 | Set Screws | 0000000 | 00000 |
| 3" | 2" | 1/2" | Rubber | 3,000 | Set Screws | 0000000 | 00000 |
| 3" | 3" | 1/2" | Rubber | 3,000 | Set Screws | 0000000 | 00000 |
| 3" | 3" | 5/8" | Rubber | 3,000 | Set Screws | 0000000 | 00000 |
| 3" | 3" | 3/4" | Rubber | 3,000 | Set Screws | 0000000 | 00000 |
Sanding Sleeve Drums for Threaded Shafts
Install a sanding sleeve on the threaded shaft of a bench or pedestal grinder using one of these drums. Slide a sleeve on the drum and tighten the nut to securely hold the sleeve. Drums are required for the use of sanding sleeves.
For technical drawings and 3-D models, click on a part number.
Sanding Drum and Sleeve Assortments
These assortments include a variety of sanding drums and sleeves to shape, deburr, and sand edges and internal surfaces.
Assortments with a quick-change attachment require no additional tools to switch out drums and sleeves. Twist the drum head by hand to tighten the sanding sleeve to the drum.
For technical drawings and 3-D models, click on a part number.
Sleeved Abrasive | ||||||||
|---|---|---|---|---|---|---|---|---|
| Number of Pieces | Shank Dia. | Drum Material | Material | Backing Material | For Use On | Includes | Each | |
Assortments | ||||||||
| 7 | 3/8" | Rubber | Aluminum Oxide | Cloth | Steel, Wood | two each of 50-, 80-, and 120-grit sleeves for each size drum (6 sleeves total) and One drum in this size (Dia. × Lg.): 3" × 3" | 0000000 | 000000 |
| 12 | 1/4" | Rubber | Aluminum Oxide | Cloth | Steel, Wood | Three drums in these sizes (Dia. × Lg.): 1/2" × 3", 1" × 3", 1 1/2" × 3" and one each of 50-, 80-, and 120-grit sleeves for each size drum (9 sleeves total) | 0000000 | 00000 |
| 16 | 1/4" | Rubber | Aluminum Oxide | Cloth | Steel, Wood | Four drums in these sizes (Dia. × Lg.): 1/2" × 2", 3/4" × 2", 1" × 2", and 1 1/2" × 2" and one each of 50-, 80-, and 120-grit sleeves for each size drum (12 sleeves total) | 0000000 | 00000 |
| 20 | 1/8" | Rubber | Aluminum Oxide | Cloth | Steel, Wood | Five drums in these sizes (Dia. × Lg.): 3/8" × 1/2", 1/2" × 1/2", 1/2" × 3/4", 3/4" × 1/2", and 3/4" × 3/4" and one each of 50-, 80-, and 120-grit sleeves for each size drum (15 sleeves total) | 0000000 | 00000 |
| 20 | 1/4" | Rubber | Aluminum Oxide | Cloth | Steel, Wood | Five drums in these sizes (Dia. × Lg.): 1/2" × 1/2", 3/4" × 1", 1" × 1", 1 1/2" × 1 1/2", and 2" × 1 1/2" and one each of 50-, 80-, and 120-grit sleeves for each size drum (15 sleeves total) | 0000000 | 00000 |
| 96 | 1/4" | Rubber | Aluminum Oxide | Cloth | Steel, Wood | Six drums in these sizes (Dia. × Lg.): 1/2" × 1/2", 3/4" × 1", 1" × 1", 1 1/2" × 1 1/2", 2" x 1 1/2", and 3" × 1" and five each of 36-, 50-, and 120-grit sleeves for each size drum (90 sleeves total) | 0000000 | 00000 |
Assortments with Quick-Change Attachment | ||||||||
| 12 | 1/4" | Rubber | Aluminum Oxide | Cloth | Steel, Wood | Three drums in these sizes (Dia. × Lg.): 1/2" × 3", 1" × 3", 1 1/2" × 3" and one each of 50-, 80-, and 120-grit sleeves for each size drum (9 sleeves total) | 0000000 | 00000 |
| 16 | 1/4" | Rubber | Aluminum Oxide | Cloth | Steel, Wood | Four drums in these sizes (Dia. × Lg.): 1/2" × 2", 3/4" × 2", 1" × 2", and 1 1/2" × 2" and one each of 50-, 80-, and 120-grit sleeves for each size drum (12 sleeves total) | 0000000 | 00000 |
| 20 | 1/4" | Rubber | Aluminum Oxide | Cloth | Steel, Wood | Five drums in these sizes (Dia. × Lg.): 1/2" × 1/2", 3/4" × 1", 1" × 1", 1 1/2" × 1 1/2", and 2" × 1 1/2" and one each of 50-, 80-, and 120-grit sleeves for each size drum (15 sleeves total) | 0000000 | 00000 |
Contact Wheels for Stationary Belt Sanders
Serrations on the wheel prevent heat buildup, allowing for fast, aggressive sanding and long belt life.
Also Available: Other wheel sizes, widths, and durometers. Please select 46425A999 and specify wheel diameter and width, arbor size, and rubber hardness.
Wheels | ||||||||
|---|---|---|---|---|---|---|---|---|
Tire | Replacement Tires | |||||||
| Dia. | Arbor Hole Dia. | Max. Speed, rpm | Material | Hardness | Each | Each | ||
2" Wd. | ||||||||
| 6" | 3/4" | 3,475 | Rubber | Durometer 55A | 00000000 | 0000000 | 00000000 | 0000000 |
| 8" | 3/4" | 3,275 | Rubber | Durometer 55A | 00000000 | 000000 | 00000000 | 000000 |
| 10" | 3/4" | 3,130 | Rubber | Durometer 55A | 00000000 | 000000 | 00000000 | 000000 |
| 12" | 1 1/4" | 3,000 | Rubber | Durometer 55A | 00000000 | 000000 | 00000000 | 000000 |
| 14" | 1 1/4" | 2,850 | Rubber | Durometer 55A | 00000000 | 000000 | 00000000 | 000000 |
3" Wd. | ||||||||
| 6" | 3/4" | 3,475 | Rubber | Durometer 55A | 00000000 | 000000 | 00000000 | 000000 |
| 8" | 3/4" | 3,275 | Rubber | Durometer 55A | 00000000 | 000000 | 00000000 | 000000 |
| 10" | 3/4" | 3,130 | Rubber | Durometer 55A | 00000000 | 000000 | 00000000 | 000000 |
| 12" | 1 1/4" | 3,000 | Rubber | Durometer 55A | 00000000 | 000000 | 00000000 | 000000 |
| 14" | 1 1/4" | 2,850 | Rubber | Durometer 55A | 00000000 | 000000 | 00000000 | 000000 |
Belt Sanding Wheels for Portable Grinders
Use sanding belts on your grinder. Slip your belt onto the rubber tire and inflate to the desired hardness.
Wheels | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Belt | Replacement Tires | |||||||||||
| Dia. | Thick. | Wd. | Lg. | Arbor Hole Size | Arbor Hole | Max. Speed, rpm | Tire Material | Features | Each | Each | ||
| 3 1/4" | 3" | 3" | 10 11/16" | 1/2"-13 | Threaded | 7,000 | Rubber | Threaded Air Valve | 0000000 | 0000000 | 0000000 | 000000 |
| 3 1/4" | 3" | 3" | 10 11/16" | 5/8"-11 | Threaded | 7,000 | Rubber | Threaded Air Valve | 0000000 | 000000 | 0000000 | 00000 |
| 5" | 2 3/4" | 2 3/4" | 15 1/2" | 5/8"-11 | Threaded | 3,500 | Rubber | Threaded Air Valve | 0000000 | 000000 | 0000000 | 00000 |
| 5" | 3 1/2" | 3 1/2" | 15 1/2" | 5/8"-11 | Threaded | 3,500 | Rubber | Threaded Air Valve | 0000000 | 000000 | 0000000 | 00000 |
Belt Sanding Wheels for Bench and Pedestal Grinders
Use sanding belts on your grinder. As the wheel rotates, the rubber tire expands and holds the belt in place.
For Belt | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Thick. | Wd. | Lg. | Arbor Hole Size | Arbor Hole | Max. Speed, rpm | Tire Material | Tire Hardness | Each | |
| 6" | 1" | 1" | 18 15/16" | 1" | Unthreaded | 3,650 | Rubber | Durometer 60A | 0000000 | 0000000 |
| 6" | 1 1/2" | 1 1/2" | 18 15/16" | 1" | Unthreaded | 3,650 | Rubber | Durometer 60A | 0000000 | 000000 |
| 6" | 2" | 2" | 18 15/16" | 1" | Unthreaded | 3,650 | Rubber | Durometer 60A | 0000000 | 000000 |
| 6" | 3" | 3" | 18 15/16" | 1" | Unthreaded | 3,650 | Rubber | Durometer 60A | 0000000 | 000000 |
