Slits on both ends of the block allow you to attach sheets over the flat or curved side.

Made of foam, these blocks flex to sand around curves.

Attach a 1" wide sanding sheet to create your own file.

These sanders are mounted on a 100 cfm dust collector. Operate in a horizontal or vertical position.

Serrations on the wheel prevent heat buildup, allowing for fast, aggressive sanding and long belt life.

The insulated housing reduces vibration and won’t transmit cold air to the operator’s hand.

These sanders have a belt release lever for quick changes.

Use for finishing and light material removal. The orbital motion produces consistent finishes

The orbital motion produces consistent finishes. Also known as jitterbug sanders.

These sanders move in a rotary motion.

Reach ceilings and high walls.

With a built-in water hose that lubricates your work surface and washes away the resulting grit, these sanders are less likely to scratch your surface than other air-powered sanders.

Shape, debur, and sand edges and internal surfaces.

The abrasive-embedded mesh construction gives you more control over sanding pressure, creating finer and more consistent finishes.

The tungsten carbide abrasive is extremely durable.

Flexible flaps reduce gouging while producing a uniform finish on flat and curved surfaces. They provide more control than a standard sanding sleeve but are more aggressive than a traditional flap wheel. As the flaps wear, new abrasive is exposed.

As the outer layer wears away, new abrasive is exposed.

Keep a convenient mix of spiral-wound sanding rolls on hand. As the outer layer wears away, new abrasive is exposed.

The abrasive-embedded mesh construction gives you more control over sanding pressure, creating finer and more consistent finishes.

Slip a cap onto the head of a shank and sand small, recessed, and hard-to-reach areas.

Various sizes and grits of flap sanding wheels are included in these assortments. Secure the shank into the collet or chuck of your tool.

The flaps are slit into narrow strips to provide more flexibility than other flap wheels.

The abrasive‐embedded mesh construction gives you more control over sanding pressure, creating finer and more consistent finishes.

A coating prevents dust and debris from building up on the abrasive surface.

The premium abrasive stays sharp longer.

An additive in the abrasive resists heat.

A coating prevents dust and debris from building up on the abrasive surface.

With alternating cloth and nylon mesh abrasive flaps, these wheels are more flexible and produce finer finishes than all-cloth flap sanding wheels.

Assortments include a selection of flap wheels to polish, clean, and deburr deep inside tubes and cylinders.

Polish, clean, and debur deep inside tubes and cylinders.

With alternating cloth and nylon mesh abrasive flaps, these wheels are more flexible and produce finer finishes than all-cloth flap wheels.

Keep sanding sheets of various grits on hand.

The soft abrasive is good for fine hand-polishing of soft nonferrous metals. Also known as crocus cloth.

The soft abrasive is good for fine hand-polishing of metal surfaces that require the smoothest finish possible after an abrasive sequence. Also known as crocus cloth.

The dental floss of abrasives, these cords slip into areas that other forms cannot. They're good for deburring and polishing small holes, narrow slots, keyways, and grooves.

A selection of 40 emery and crocus sanding sheets are included in these assortments.

A coating prevents dust and debris from building up on the abrasive surface.

Assortments include three cut-to-length sanding rolls of various grits that resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents.

These sheets resist deterioriation when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.

The long sides are angled 75°.

Evenly sand two surfaces at once.

A cushioned layer gives you more control over sanding pressure, creating finer and more consistent finishes. These rolls can be cut to length.

Flexible enough to sand around curves and in corners, these sponges provide the comfort and control of a sanding block. They have a long-lasting diamond abrasive on one side.

The dental floss of abrasives, these cords slip into areas that other forms cannot. They're good for deburring and polishing small holes, narrow slots, keyways, and grooves.

A layer of mesh lets sanding dust and debris escape during use, preventing material buildup on the abrasive surface. These sheets resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.

Providing the control of a sanding block while remaining flexible, these sponges sand around curves and in corners.

Cut the length you need, then stick to your sanding tool. When it's time to change the sheet, peel it off.

Peel and stick to your sanding tool. When it’s time to change the sheet, peel it off.

Cut the length you need, then quickly attach, remove, and reuse.

Quickly attach, remove, and reuse.

The mesh backing lets sanding dust and debris escape during use, preventing material build up on the abrasive surface.

These sheets have a long-lasting diamond abrasive.

Dust and debris won't build up on the abrasive surface.

These sheets have a long-lasting diamond abrasive.

A coating prevents dust and debris from building up on the abrasive surface.

The premium abrasive stays sharp longer.

The outer 3/8" of these discs is extremely flexible to prevent marring or gouging your work when sanding a radius or contour.

The heavy duty construction provides more support than standard discs for heavy material removal.

Thicker, more pliable, and less aggressive than standard nylon mesh quick-change discs, use these for finer sanding on curved surfaces.

The premium abrasive stays sharp longer.

Used for heavy cleaning and stripping, these discs have an abrasive-embedded nylon mesh construction that gives you more control over sanding pressure.

The premium abrasive stays sharp longer.

The premium abrasive stays sharp longer.

Fit these discs over your tool's arbor to sand aluminum, soft metals, and nonmetals.

A coating prevents dust and debris from building up on the abrasive surface.

Fit these discs over your tool's arbor.

Fit these discs over your tool's arbor to sand masonry, ceramics, and composites.

The premium abrasive stays sharp longer. Holes in the disc let you see the surface you’re sanding.

Holes allow dust removal when used with a vacuum sander.

Holes allow dust removal when used with a vacuum sander.

The mesh backing lets sanding dust and debris escape during use, preventing material build up on the abrasive surface.

The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.

The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.

The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.

Press onto a compatible sanding tool or backup pad; peel off to remove.

These discs have a long-lasting diamond abrasive.

Holes allow dust removal when used with a vacuum sander.

Holes allow dust removal when used with a vacuum sander.

With more flaps than standard discs, these last 30-40% longer.