Also known as cross- and square-sanding pad shank adapters, these arbors are required to attach sanding pads for internal and irregular surfaces to hand-held drills and die grinders.

The extra-coarse threads on these arbors provide a stronger hold on the sanding roll.

The threaded head on these arbors holds a grinding cone.

Reduce the arbor hole size on a flap sanding wheel so that it fits the shaft on your tool.

Adapt flap wheels with a threaded stud for use on tools that have a threaded spindle.

Mount wheel brushes that have an arbor hole to hand-held drills and die grinders.

Thread rubber-cushioned grinding bits onto one of these arbors to use them in drills and die grinders.

Use these arbors to mount buffing wheels, grinding wheels and other abrasive discs to the tapered shaft on bench-top motors, grinders, and buffers.

Slide a sanding sleeve on the drum and tighten the nut or screw to securely hold the sleeve.

This drum is required to use a sanding sleeve with a Dremel grinder.

Mount a sanding sleeve to the straight shaft of a bench or pedestal grinder using one of these drums.

Attach to grinder and buffer shafts to hold buffing wheels with shanks.

Mount to the straight shaft on your grinder or buffer.