Grit Grit |
|---|
For Finish For Finish |
|---|
|
|
For Use On For Use On |
|---|
Abrasive Material Abrasive Material |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Sanding Properties Sanding Properties |
|---|
|
About Sanding Abrasives
More
Cushioned Sanding Pads for Stainless Steel and Hard Metals
Sized for tight spaces, these small pads sand flat and curved surfaces. They have a flexible foam layer that gives you more control over sanding pressure, creating finer and more consistent finishes. The abrasive is on the top and bottom. Pads resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.
For technical drawings and 3-D models, click on a part number.
| Grit | For Use On | Abrasive Material | Abrasive Backing Material | Sanding Properties | Each | |
2" × 2" | ||||||
|---|---|---|---|---|---|---|
For Smooth Finish | ||||||
| 220 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 00000 |
| 230 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
For Extra-Smooth Finish | ||||||
| 240 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 260 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 280 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 320 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
For Polished Finish | ||||||
| 500 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 800 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 1000 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 1200 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 1600 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 2000 | Stainless Steel, Titanium, Steel, Iron, Nickel | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 2400 | Stainless Steel, Titanium, Steel, Iron, Nickel | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
3" × 4" | ||||||
For Smooth Finish | ||||||
| 220 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 230 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
For Extra-Smooth Finish | ||||||
| 240 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 260 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 280 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 320 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
For Polished Finish | ||||||
| 500 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 800 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 1000 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 1200 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 1600 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 2000 | Stainless Steel, Titanium, Steel, Iron, Nickel | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 2400 | Stainless Steel, Titanium, Steel, Iron, Nickel | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
Cushioned Sanding Pad Assortments for Stainless Steel and Hard Metals
Sized for tight spaces, these small pads sand flat and curved surfaces. They have a flexible foam layer that gives you more control over sanding pressure, creating finer and more consistent finishes. The abrasive is on the top and bottom. Pads resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.
For technical drawings and 3-D models, click on a part number.
| Includes | No. of Pieces | For Use On | Abrasive Backing Material | Sanding Properties | Each | |
2" × 2" | ||||||
|---|---|---|---|---|---|---|
| One each 220, 230, 240, 260, 280, 320, 500, 800, 1000, 1200, 1500-grit Silicon Carbide Pads One each 2000, 2500-grit Aluminum Oxide Pads | 13 | Stainless Steel, Titanium, Steel, Iron, Nickel | Cloth and Foam | Water Resistant, Tear Resistant | 000000 | 000000 |
3" × 4" | ||||||
| One each 220, 230, 240, 260, 280, 320, 500, 800, 1000, 1200, 1500-grit Silicon Carbide Pads One each 2000, 2500-grit Aluminum Oxide Pads | 13 | Stainless Steel, Titanium, Steel, Iron, Nickel | Cloth and Foam | Water Resistant, Tear Resistant | 000000 | 00000 |
Cushioned Sanding Pads
Sized for tight spaces, these small pads sand flat and curved surfaces. They have a flexible foam layer that gives you more control over sanding pressure, creating finer and more consistent finishes. The abrasive is on the top and bottom. Pads resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.
For technical drawings and 3-D models, click on a part number.
| Grit | For Use On | Abrasive Material | Abrasive Backing Material | Sanding Properties | Each | |
2" × 2" | ||||||
|---|---|---|---|---|---|---|
For Extra-Smooth Finish | ||||||
| 400 | Steel, Wood | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 00000 |
For Polished Finish | ||||||
| 600 | Steel, Wood | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 800 | Steel, Wood | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 1200 | Steel, Wood | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 1400 | Steel, Wood | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 1600 | Steel, Wood | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 2000 | Steel, Wood | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 2400 | Steel, Wood | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 3000 | Steel, Wood | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
3" × 4" | ||||||
For Extra-Smooth Finish | ||||||
| 400 | Steel, Wood | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
For Polished Finish | ||||||
| 600 | Steel, Wood | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 800 | Steel, Wood | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 1200 | Steel, Wood | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 1400 | Steel, Wood | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 1600 | Steel, Wood | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 2000 | Steel, Wood | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 2400 | Steel, Wood | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 3000 | Steel, Wood | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
Cushioned Sanding Pad Assortments
Sized for tight spaces, these small pads sand flat and curved surfaces. They have a flexible foam layer that gives you more control over sanding pressure, creating finer and more consistent finishes. The abrasive is on the top and bottom. Pads resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.
For technical drawings and 3-D models, click on a part number.
| Includes | No. of Pieces | For Use On | Abrasive Backing Material | Sanding Properties | Each | |
2" × 2" | ||||||
|---|---|---|---|---|---|---|
| One each 400, 600, 800, 1200, 1350, 1500, 2000-grit Silicon Carbide Pads One each 2500, 3000-grit Aluminum Oxide Pads | 9 | Steel, Wood | Cloth and Foam | Water Resistant, Tear Resistant | 000000 | 000000 |
3" × 4" | ||||||
| One each 400, 600, 800, 1200, 1350, 1500, 2000-grit Silicon Carbide Pads One each 2500, 3000-grit Aluminum Oxide Pads | 9 | Steel, Wood | Cloth and Foam | Water Resistant, Tear Resistant | 000000 | 00000 |
Clog-Resistant Sanding Sponges
A coating prevents dust and debris from building up on the abrasive surface. Flexible enough to sand around curves and in corners, these sponges provide the comfort and control of a sanding block. They have abrasive on all four sides.
36 and 60 Grit—Use for paint stripping.
80-150 Grit—Use for bare surface sanding.
180 and 320 Grit—Use for sanding between coats of paint.
For technical drawings and 3-D models, click on a part number.
| Grit | Wd. | Lg. | Thick. | For Use On | Abrasive Material | Abrasive Backing Material | Sanding Properties | Each | |
For Rough Finish | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 36 | 2 5/8" | 3 3/4" | 1" | Steel, Wood | Silicon Carbide | Foam | Clog Resistant | 0000000 | 00000 |
| 60 | 2 5/8" | 3 3/4" | 1" | Steel, Wood | Silicon Carbide | Foam | Clog Resistant | 0000000 | 0000 |
| 80 | 2 5/8" | 3 3/4" | 1" | Steel, Wood | Ceramic Alumina | Foam | Clog Resistant | 0000000 | 0000 |
For Smooth Finish | |||||||||
| 100 | 2 5/8" | 3 3/4" | 1" | Steel, Wood | Ceramic Alumina | Foam | Clog Resistant | 0000000 | 0000 |
| 150 | 2 5/8" | 3 3/4" | 1" | Steel, Wood | Ceramic Alumina | Foam | Clog Resistant | 0000000 | 0000 |
| 180 | 2 5/8" | 3 3/4" | 1" | Steel, Wood | Aluminum Oxide | Foam | Clog Resistant | 0000000 | 0000 |
For Extra-Smooth Finish | |||||||||
| 320 | 2 5/8" | 3 3/4" | 1" | Steel, Wood | Aluminum Oxide | Foam | Clog Resistant | 0000000 | 0000 |
Sanding Sponges
Flexible enough to sand around curves and in corners, these sponges provide the comfort and control of a sanding block. The abrasive is one grit on the top and one side, and another grit on the bottom and the other side.
For technical drawings and 3-D models, click on a part number.
| Grit (For Finish) | Wd. | Lg. | Thick. | For Use On | Abrasive Material | Abrasive Backing Material | Pkg. Qty. | Pkg. | |
| 46 (Rough), 80 (Rough) | 3 3/4" | 2 3/4" | 1" | Steel, Wood | Aluminum Oxide | Foam | 3 | 0000000 | 00000 |
| 80 (Rough), 120 (Smooth) | 3 3/4" | 2 3/4" | 1" | Steel, Wood | Aluminum Oxide | Foam | 10 | 0000000 | 00000 |
| 80 (Rough), 120 (Smooth) | 3 3/4" | 2 3/4" | 1" | Steel, Wood | Aluminum Oxide | Foam | 3 | 0000000 | 0000 |
| 80 (Rough), 120 (Smooth) | 5" | 3" | 1" | Steel, Wood | Aluminum Oxide | Foam | 3 | 0000000 | 0000 |
| 100 (Smooth), 150 (Smooth) | 2 3/4" | 4" | 1" | Steel, Wood | Aluminum Oxide | Foam | 1 | 0000000 | 0000 |
| 100 (Smooth), 150 (Smooth) | 2 7/8" | 4 7/8" | 1" | Steel, Wood | Aluminum Oxide | Foam | 1 | 0000000 | 0000 |
| 100 (Smooth), 150 (Smooth) | 9" | 3 5/16" | 1" | Steel, Wood | Aluminum Oxide | Foam | 1 | 0000000 | 0000 |
Sanding Sponges with Angled Sides
The long sides are angled 75°. Flexible enough to sand around curves and in corners, these sponges provide the comfort and control of a sanding block. The abrasive is one grit on the top and one side, and another grit on the bottom and the other side.
For technical drawings and 3-D models, click on a part number.
| Grit (For Finish) | Wd. | Lg. | Thick. | For Use On | Abrasive Material | Abrasive Backing Material | Pkg. Qty. | Pkg. | |
| 80 (Rough), 120 (Smooth) | 3" | 5" | 1" | Steel, Wood | Aluminum Oxide | Foam | 3 | 0000000 | 000000 |
Super-Flexible Sanding Sponges
These sponges conform exceptionally well to small, contoured surfaces. The abrasive is on one side.
For technical drawings and 3-D models, click on a part number.
Sanding Sponges for Corners
Evenly sand two surfaces at once. These sponges provide the comfort and control of a sanding block while remaining flexible. The abrasive is on two sides.
For technical drawings and 3-D models, click on a part number.
| Grit | Wd. | Lg. | Thick. | For Use On | Abrasive Material | Abrasive Backing Material | Each | |
For Smooth Finish | ||||||||
|---|---|---|---|---|---|---|---|---|
| 100 | 3 3/4" | 7" | 4 1/2" | Steel, Wood | Aluminum Oxide | Foam | 0000000 | 00000 |
Cushioned Sanding Pads for Aluminum, Soft Metals, and Nonmetals
Sized for tight spaces, these small pads sand flat and curved surfaces. They have a flexible foam layer that gives you more control over sanding pressure, creating finer and more consistent finishes. The abrasive is on the top and bottom. Pads resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.
For technical drawings and 3-D models, click on a part number.
2" × 2" | 3" × 4" | |||||||
|---|---|---|---|---|---|---|---|---|
| Grit | For Use On | Abrasive Material | Abrasive Backing Material | Sanding Properties | Each | Each | ||
For Smooth Finish | ||||||||
| 180 | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 00000 | 00000000 | 00000 |
For Extra-Smooth Finish | ||||||||
| 320 | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 | 00000000 | 0000 |
| 360 | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 | 00000000 | 0000 |
| 400 | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 | 00000000 | 0000 |
For Polished Finish | ||||||||
| 800 | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 | 00000000 | 0000 |
| 1600 | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 | 00000000 | 0000 |
| 3000 | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 | 00000000 | 0000 |
Cushioned Sanding Pad Assortments for Aluminum, Soft Metals, and Nonmetals
Sized for tight spaces, these small pads sand flat and curved surfaces. They have a flexible foam layer that gives you more control over sanding pressure, creating finer and more consistent finishes. Pads resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.
For technical drawings and 3-D models, click on a part number.
| Includes | No. of Pieces | For Use On | Abrasive Material | Abrasive Backing Material | Sanding Properties | Each | |
2" × 2" | |||||||
|---|---|---|---|---|---|---|---|
| One each 180, 320, 360, 400, 800, 1500, 3000-grit Pads | 7 | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 000000 | 000000 |
3" × 4" | |||||||
| One each 180, 320, 360, 400, 800, 1500, 3000-grit Pads | 7 | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 000000 | 00000 |
Cushioned Sanding Sponges for Aluminum, Soft Metals, and Nonmetals
Providing the control of a sanding block while remaining flexible, these sponges sand around curves and in corners. They have abrasive on the top and bottom.
For technical drawings and 3-D models, click on a part number.
| Grit | Wd. | Lg. | Thick. | For Use On | Abrasive Material | Abrasive Backing Material | Each | |
For Smooth Finish | ||||||||
|---|---|---|---|---|---|---|---|---|
| 100 | 3 3/4" | 4 3/4" | 1/2" | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Silicon Carbide | Foam | 00000000 | 00000 |
| 150 | 3 3/4" | 4 3/4" | 1/2" | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Silicon Carbide | Foam | 00000000 | 0000 |
| 220 | 3 3/4" | 4 3/4" | 1/2" | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Silicon Carbide | Foam | 00000000 | 0000 |
Sanding Sponges for Masonry, Ceramics, and Composites
Flexible enough to sand around curves and in corners, these sponges provide the comfort and control of a sanding block. They have a long-lasting diamond abrasive on one side.
For technical drawings and 3-D models, click on a part number.
| Grit | Wd. | Lg. | Thick. | For Use On | Abrasive Material | Abrasive Backing Material | Each | |
For Rough Finish | ||||||||
|---|---|---|---|---|---|---|---|---|
| 60 | 2 1/8" | 3 1/2" | 1" | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Diamond | Foam | 0000000 | 000000 |
For Smooth Finish | ||||||||
| 120 | 2 1/8" | 3 1/2" | 1" | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Diamond | Foam | 0000000 | 00000 |
| 150 | 2 1/8" | 3 1/2" | 1" | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Diamond | Foam | 0000000 | 00000 |
For Extra-Smooth Finish | ||||||||
| 400 | 2 1/8" | 3 1/2" | 1" | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Diamond | Foam | 0000000 | 00000 |
For Polished Finish | ||||||||
| 800 | 2 1/8" | 3 1/2" | 1" | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Diamond | Foam | 0000000 | 00000 |
| 1800 | 2 1/8" | 3 1/2" | 1" | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Diamond | Foam | 0000000 | 00000 |
Sanding Sponge Assortments for Masonry, Ceramics, and Composites
Flexible enough to sand around curves and in corners, these sponges provide the comfort and control of a sanding block. They have a long-lasting diamond abrasive on one side.
For technical drawings and 3-D models, click on a part number.
| Includes | Wd. | Lg. | Thick. | No. of Pieces | For Use On | Abrasive Material | Abrasive Backing Material | Each | |
| One each 60, 120, 200, 400, 800, 1800-grit Sponges | 2 1/8" | 3 1/2" | 1" | 6 | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Diamond | Foam | 0000000 | 0000000 |