Keep sanding sheets of various grits on hand.

The grit particles are block shaped and cut slowly to produce a polished surface on metals.

The soft abrasive is good for fine hand-polishing of metal surfaces that require the smoothest finish possible after an abrasive sequence. Also known as crocus cloth.

Keep a variety of grits on hand, so you always have the right one for the job. These sheets won’t deteriorate when used wet or with grease, chemicals, cutting fluids, and other solvents.

A coating prevents dust and debris from building up on the abrasive surface.

The thick, abrasive-embedded nylon mesh construction flexes to compensate for uneven pressure as you sand, producing a consistent finish.

With sheets in various grits, these assortments help you sand material to your desired finish. Coated in resin, these sheets are slow to degrade when used with water, grease, cutting fluids, or other chemicals.

Keep a variety of grits on hand, so you can get the finish you need. You won’t have to worry about these sanding sheets getting clogged or deteriorating when used wet.

The mesh in these sanding pads flexes to compensate for uneven pressure as you sand, producing a consistent finish.

These sheets have a long lasting diamond abrasive.

Quickly attach, remove, and reuse.

A coating prevents dust and debris from building up on the abrasive surface.

Easy to attach and remove, these sheets grip the surface of your vacuum detail sander. Vacuum holes allow dust to get sucked up before it can build up and dull the abrasive surface.

Stick these sheets to your dust-collecting detail sander to smooth edges, corners, and other tight spaces.

These sheets have a long-lasting diamond abrasive.

Stick these sheets to a hand sanding block for a more secure grip than hook and loop sanding sheets.

The mesh backing lets sanding dust and debris escape during use, preventing material build up on the abrasive surface.

Attach these sheets to pole sanders to smooth ceilings and walls. They’re covered in aluminum oxide, which is the most common abrasive for general use.

Use steel wool for a range of surface preparation tasks, from removing paint and rust to polishing for a fine finish.

Keep various grades of steel wool pads on hand.

Good for use on bronze and hard woods, this wool won't leave behind small fibers that cause rust.