Spiral-Wound Roll Sandpaper

Clear All

	Form Form	Show

	Spiral-Wound Roll

	Form Form	Hide


Sheet	Roll

Disc	Belt

Flap Wheel	Sponge

Sleeve	Spiral-Wound Roll

Bit	Flap Disc

Stick	Cord

Brick	Shank-Mount Pad

	Shape Shape

Straight

Tapered

	Diameter Diameter

	Length Length

3/4"

1 1/2"

	Grit Grit

	Arbor Hole Diameter Arbor Hole Diameter

1/8"

3/16"

	For Use On For Use On

	Abrasive Material Abrasive Material

Aluminum Oxide

Ceramic Alumina

Zirconia Alumina

	For Use With For Use With

Grinders for Bits and Burs

	Abrasive Backing Material Abrasive Backing Material

Fabric

	Maximum Speed Maximum Speed

10,000 to 19,999 rpm

20,000 to 29,999 rpm

	For Finish For Finish

Rough

Smooth

Extra Smooth

	Arbor Hole Arbor Hole

Unthreaded

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

	Container Type Container Type

Compartmented Plastic Case

	Number of Pieces Number of Pieces

113 Products

About Sanding Abrasives

Spiral-Wound Sanding Rolls

As the outer layer wears away, new abrasive is exposed. Also known as cartridge rolls. A shank adapter is required (sold separately).

Straight rolls are for use in channels, fillets, recesses, contours, sidewalls, and other hard-to-reach spots.

Tapered rolls are for use on angles, corners, concave contours, funnel-shaped recesses, and other intricate shapes. The diameter listed is for the large end of the roll.

Straight

Tapered

Straight Rolls
Dia.	Lg.	Arbor Hole Dia.	Max. Speed, rpm	Abrasive Material	Abrasive Backing Material	For Use On	For Use With	Pkg. Qty.	Choose a Grit		Pkg.
For Rough Finish
1/4"	1"	1/8"	26,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	25	50, 60, 80	00000000	00000
1/4"	1 1/2"	1/8"	26,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	25	50, 60, 80	00000000	0000
5/16"	1"	1/8"	26,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	25	50, 60, 80	00000000	0000
5/16"	1 1/2"	1/8"	26,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	25	50, 60, 80	00000000	00000
3/8"	1"	1/8"	26,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	25	50, 60, 80	00000000	0000
3/8"	1 1/2"	1/8"	26,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	25	50, 60, 80	00000000	0000
1/2"	3/4"	1/8"	26,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	25	50, 60, 80	00000000	0000
1/2"	1"	1/8"	26,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	25	50, 60, 80	00000000	0000
1/2"	1 1/2"	1/8"	26,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	25	50, 60, 80	00000000	00000
5/8"	1"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	50, 60, 80	00000000	0000
5/8"	1 1/2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	50, 60, 80	00000000	0000
5/8"	2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	50, 60, 80	00000000	0000
3/4"	1"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	50, 60, 80	00000000	0000
3/4"	1 1/2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	50, 60, 80	00000000	0000
3/4"	2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	50, 60, 80	00000000	00000
1"	1"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	50, 60, 80	00000000	00000
1"	1 1/2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	50, 60, 80	00000000	00000
1"	2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	5	50, 60, 80	00000000	0000
For Smooth Finish
1/4"	1"	1/8"	26,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	25	120, 180	00000000	0000
1/4"	1 1/2"	1/8"	26,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	25	120, 180	00000000	0000
5/16"	1"	1/8"	26,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	25	120, 180	00000000	0000
5/16"	1 1/2"	1/8"	26,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	25	120, 180	00000000	00000
3/8"	1"	1/8"	26,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	25	120, 180	00000000	0000
3/8"	1 1/2"	1/8"	26,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	25	120, 180	00000000	0000
1/2"	3/4"	1/8"	26,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	25	120, 180	00000000	0000
1/2"	1"	1/8"	26,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	25	120, 180	00000000	0000
1/2"	1 1/2"	1/8"	26,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	25	120, 180	00000000	00000
5/8"	1"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	120, 180	00000000	0000
5/8"	1 1/2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	120, 180	00000000	0000
5/8"	2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	120	00000000	0000
3/4"	1"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	120, 180	00000000	0000
3/4"	1 1/2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	120, 180	00000000	0000
3/4"	2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	120, 180	00000000	00000
1"	1"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	120, 180	00000000	00000
1"	1 1/2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	120, 180	00000000	00000
1"	2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	5	120, 180	00000000	0000
For Extra-Smooth Finish
1/4"	1"	1/8"	26,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	25	240, 320	00000000	0000
1/4"	1 1/2"	1/8"	26,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	25	240, 320	00000000	0000
5/16"	1"	1/8"	26,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	25	240, 320	00000000	0000
5/16"	1 1/2"	1/8"	26,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	25	240, 320	00000000	00000
3/8"	1"	1/8"	26,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	25	240, 320	00000000	0000
3/8"	1 1/2"	1/8"	26,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	25	240, 320	00000000	0000
1/2"	3/4"	1/8"	26,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	25	240, 320	00000000	0000
1/2"	1"	1/8"	26,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	25	240, 320	00000000	0000
1/2"	1 1/2"	1/8"	26,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	25	240, 320	00000000	00000
5/8"	1"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	240, 320	00000000	0000
5/8"	1 1/2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	240, 320	00000000	0000
5/8"	2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	240, 320	00000000	0000
3/4"	1"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	240, 320	00000000	0000
3/4"	1 1/2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	240, 320	00000000	0000
3/4"	2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	240, 320	00000000	00000
1"	1"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	240, 320	00000000	00000
1"	1 1/2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	240, 320	00000000	00000
1"	2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	5	240, 320	00000000	0000
Tapered Rolls
For Rough Finish
3/8"	1"	1/8"	26,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	25	50, 60, 80	00000000	00000
3/8"	1 1/2"	1/8"	26,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	25	50, 60, 80	00000000	00000
1/2"	1"	1/8"	26,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	25	50, 60, 80	00000000	00000
1/2"	1 1/2"	1/8"	26,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	50, 60, 80	00000000	0000
5/8"	1"	1/8"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	50, 60, 80	00000000	0000
5/8"	1 1/2"	1/8"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	50, 60, 80	00000000	0000
3/4"	1 1/2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	50, 60, 80	00000000	0000
3/4"	2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	50, 60, 80	00000000	00000
7/8"	1 1/2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	50, 60, 80	00000000	00000
1"	1"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	50, 60	00000000	00000
1"	1 1/2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	50, 60, 80	00000000	00000
1"	2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	50, 60, 80	00000000	00000
For Smooth Finish
3/8"	1"	1/8"	26,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	25	120, 180	00000000	00000
3/8"	1 1/2"	1/8"	26,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	25	120, 180	00000000	00000
1/2"	1"	1/8"	26,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	25	120, 180	00000000	00000
1/2"	1 1/2"	1/8"	26,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	120, 180	00000000	0000
5/8"	1"	1/8"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	120, 180	00000000	0000
5/8"	1 1/2"	1/8"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	120, 180	00000000	0000
3/4"	1 1/2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	120, 180	00000000	0000
3/4"	2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	120, 180	00000000	00000
7/8"	1 1/2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	180	00000000	00000
1"	1"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	120, 180	00000000	00000
1"	1 1/2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	120, 180	00000000	00000
1"	2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	120, 180	00000000	00000
For Extra-Smooth Finish
3/8"	1"	1/8"	26,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	25	240, 320	00000000	00000
3/8"	1 1/2"	1/8"	26,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	25	240, 320	00000000	00000
1/2"	1"	1/8"	26,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	25	240, 320	00000000	00000
1/2"	1 1/2"	1/8"	26,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	240, 320	00000000	0000
5/8"	1"	1/8"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	240, 320	00000000	0000
5/8"	1 1/2"	1/8"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	240, 320	00000000	0000
3/4"	1 1/2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	240, 320	00000000	0000
3/4"	2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	240, 320	00000000	00000
7/8"	1 1/2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	240, 320	00000000	00000
1"	1"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	320	00000000	00000
1"	2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	10	320	00000000	00000

Required Shank Adapters

For 3/4" and 1" Lg. Rolls with 1/8" Arbor Hole Dia.
Shank Dia.	Overall Lg.		Each
1/8"	2 3/4"	0000000	00000
1/4"	2 1/2"	0000000	0000
1/4"	4"	0000000	0000
1/4"	6"	0000000	0000
For 3/4" and 1" Lg. Rolls with 3/16" Arbor Hole Dia.
1/4"	2 3/4"	0000000	0000
For 1 1/2" Lg. Rolls with 1/8" Arbor Hole Dia.
1/8"	3"	0000000	0000
1/4"	2 3/4"	0000000	0000
1/4"	4"	0000000	0000
1/4"	6"	0000000	0000
For 1 1/2" Lg. Rolls with 3/16" Arbor Hole Dia.
1/4"	3"	0000000	0000
For 2" Lg. Rolls with 3/16" Arbor Hole Dia.
1/4"	3 1/2"	0000000	0000

Spiral-Wound Sanding Roll Assortments

As the outer layer wears away, new abrasive is exposed. Also known as cartridge rolls.

Straight rolls are for use in channels, fillets, recesses, contours, sidewalls, and other hard-to-reach spots.

Tapered rolls are for use on angles, corners, concave contours, funnel-shaped recesses, and other intricate shapes. The diameter listed is for the large end of the roll.

Number of Pieces	Arbor Hole Dia.	Abrasive Material	Abrasive Backing Material	For Use On	For Use With	Includes		Each
122	1/8"	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	2 1/4" Dia. Shank Adapters 16 Rough-Finish (80 Grit) Straight Spiral-Wound Sanding Rolls—1/4" Dia. × 1" Lg. 9 Rough-Finish (80 Grit) Straight Spiral-Wound Sanding Rolls—1/4" Dia. × 1 1/2" Lg. 6 Rough-Finish (80 Grit) Straight Spiral-Wound Sanding Rolls—3/8" Dia. × 1" Lg. 12 Rough-Finish (80 Grit) Straight Spiral-Wound Sanding Rolls—3/8" Dia. × 1 1/2" Lg. 8 Rough-Finish (80 Grit) Straight Spiral-Wound Sanding Rolls—1/2" Dia. × 1 1/2" Lg. 9 Rough-Finish (80 Grit) Tapered Spiral-Wound Sanding Rolls—3/8" Dia. × 1 1/2" Lg. 6 Rough-Finish (80 Grit) Tapered Spiral-Wound Sanding Rolls—1/2" Dia. × 1 1/2" Lg. 16 Smooth-Finish (120 Grit) Straight Spiral-Wound Sanding Rolls—1/4" Dia. × 1" Lg. 12 Smooth-Finish (120 Grit) Straight Spiral-Wound Sanding Rolls—1/4" Dia. × 1 1/2" Lg. 6 Smooth-Finish (120 Grit) Straight Spiral-Wound Sanding Rolls—3/8" Dia. × 1" Lg. 12 Smooth-Finish (120 Grit) Straight Spiral-Wound Sanding Rolls—3/8" Dia. × 1 1/2" Lg. 8 Smooth-Finish (120 Grit) Straight Spiral-Wound Sanding Rolls—1/2" Dia. × 1 1/2" Lg.	0000000	000000

Long-Life Spiral-Wound Sanding Rolls

The premium abrasive stays sharp longer. Use these rolls in channels, fillets, recesses, contours, sidewalls, and other hard-to-reach spots. As the outer layer wears away, new abrasive is exposed. Also known as cartridge rolls. A shank adapter is required (sold separately).

Straight

For Rough Finish
Dia.	Lg.	Arbor Hole Dia.	Max. Speed, rpm	Abrasive Material	Abrasive Backing Material	For Use On	For Use With	Pkg. Qty.	Choose a Grit		Pkg.
1/2"	1"	1/8"	26,000	Zirconia Alumina	Cloth	Steel, Wood	Grinders for Bits and Burs	25	36, 50, 60, 80	0000000	000000
1/2"	1 1/2"	1/8"	26,000	Zirconia Alumina	Cloth	Steel, Wood	Grinders for Bits and Burs	25	36, 50, 60, 80	0000000	00000
5/8"	1"	3/16"	18,000	Zirconia Alumina	Cloth	Steel, Wood	Grinders for Bits and Burs	10	36, 50, 60, 80	0000000	0000
5/8"	1 1/2"	3/16"	18,000	Zirconia Alumina	Cloth	Steel, Wood	Grinders for Bits and Burs	10	36, 50, 60, 80	0000000	0000
3/4"	1"	3/16"	18,000	Zirconia Alumina	Cloth	Steel, Wood	Grinders for Bits and Burs	10	36, 50, 60, 80	0000000	0000
3/4"	1 1/2"	3/16"	18,000	Zirconia Alumina	Cloth	Steel, Wood	Grinders for Bits and Burs	10	36, 50, 60, 80	0000000	00000

Required Shank Adapters

For 1" Lg. Rolls with 1/8" Arbor Hole Dia.
Shank Dia.	Overall Lg.		Each
1/8"	2 3/4"	0000000	00000
1/4"	2 1/2"	0000000	0000
1/4"	4"	0000000	0000
1/4"	6"	0000000	0000
For 1" Lg. Rolls with 3/16" Arbor Hole Dia.
1/4"	2 3/4"	0000000	0000
For 1 1/2" Lg. Rolls with 1/8" Arbor Hole Dia.
1/8"	3"	0000000	0000
1/4"	2 3/4"	0000000	0000
1/4"	4"	0000000	0000
1/4"	6"	0000000	0000
For 1 1/2" Lg. Rolls with 3/16" Arbor Hole Dia.
1/4"	3"	0000000	0000

Spiral-Wound Sanding Rolls for Stainless Steel and Hard Metals

Use these rolls in channels, fillets, recesses, contours, sidewalls, and other hard-to-reach spots. As the outer layer wears away, new abrasive is exposed. Also known as cartridge rolls. A shank adapter is required (sold separately).

Straight

										Each
Dia.	Lg.	Arbor Hole Dia.	Max. Speed, rpm	Abrasive Material	Abrasive Backing Material	For Use On	For Use With	Choose a Grit		1-49	50-Up
For Rough Finish
1/4"	1"	1/8"	26,000	Ceramic Alumina	Cloth	Stainless Steel, Titanium, Steel, Iron, Nickel	Grinders for Bits and Burs	80	0000000	00000	00000
3/8"	1"	1/8"	26,000	Ceramic Alumina	Cloth	Stainless Steel, Titanium, Steel, Iron, Nickel	Grinders for Bits and Burs	60, 80	00000000	0000	000
1/2"	1 1/2"	1/8"	26,000	Ceramic Alumina	Cloth	Stainless Steel, Titanium, Steel, Iron, Nickel	Grinders for Bits and Burs	60, 80	00000000	0000	0000
3/4"	1 1/2"	1/8"	18,000	Ceramic Alumina	Cloth	Stainless Steel, Titanium, Steel, Iron, Nickel	Grinders for Bits and Burs	80	0000000	0000	0000
For Smooth Finish
3/8"	1"	1/8"	26,000	Ceramic Alumina	Cloth	Stainless Steel, Titanium, Steel, Iron, Nickel	Grinders for Bits and Burs	120	0000000	0000	000
1/2"	1 1/2"	1/8"	26,000	Ceramic Alumina	Cloth	Stainless Steel, Titanium, Steel, Iron, Nickel	Grinders for Bits and Burs	120	0000000	0000	0000

Required Shank Adapters

For 1" Lg. Rolls with 1/8" Arbor Hole Dia.
Shank Dia.	Overall Lg.		Each
1/8"	2 3/4"	0000000	00000
1/4"	2 1/2"	0000000	0000
1/4"	4"	0000000	0000
1/4"	6"	0000000	0000
For 1 1/2" Lg. Rolls with 1/8" Arbor Hole Dia.
1/8"	3"	0000000	0000
1/4"	2 3/4"	0000000	0000
1/4"	4"	0000000	0000
1/4"	6"	0000000	0000