We will reply to your message within an hour.
More
These rolls can be cut to length.
These sheets resist deterioriation when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.
These cut-to-length rolls resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.
Cut the length you need, then stick to your sanding tool. When it's time to change the sheet, peel it off.
Create consistent finishes on stainless steel, titanium, steel, iron, and nickel.
Quickly attach, remove, and reuse these hook-and-loop sheets with triangular detail sanders.
Peel and stick to your file handle. When it’s time to change the sheet, peel it off.
Dust and debris won't build up on the abrasive surface.
Press onto a compatible sanding tool or backup pad; peel off to remove.
A coating prevents dust and debris from building up on the abrasive surface.
Holes allow dust removal when used with a vacuum sander.
The premium abrasive stays sharp longer.
The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.
The premium abrasive lasts longer as well as cuts faster and produces a more consistent finish than standard hook and loop discs.
The mesh backing lets sanding dust and debris escape during use, preventing material build up on the abrasive surface.
Quickly attach, remove, and reuse these discs with a compatible sanding tool or backup pad.
A special fastener on the back of these discs allows you to easily swap one disc for another.
These belts resist deterioration when used with water or cutting fluids.
These belts have a cushioned layer.
Use these narrow belts on hand-held sanding sticks.
Secure the shank into the collet or chuck of your tool.
The flaps are slit into narrow strips to provide more flexibility than other flap wheels.
The abrasive‐embedded mesh construction gives you more control over sanding pressure, creating finer and more consistent finishes.
The threaded stud allows faster wheel changes but requires the use of an adapter in your tool.
With alternating cloth and nylon mesh abrasive flaps, these wheels are more flexible and produce finer finishes than all-cloth flap sanding wheels.
Polish, clean, and debur deep inside tubes and cylinders.
Shape, debur, and sand edges and internal surfaces.
Flexible flaps reduce gouging while producing a uniform finish on flat and curved surfaces. They provide more control than a standard sanding sleeve but are more aggressive than a traditional flap wheel. As the flaps wear, new abrasive is exposed.
As the outer layer wears away, new abrasive is exposed.
Choose a bit with the same angle as your countersink to debur the inside of the hole.
The rubber backing cushions the abrasive to prevent gouging your aluminum, soft metal, and nonmetal work surfaces.
The silicon carbide abrasive in these wheels is suspended in rubber for a cushioned grind with light material removal.