About Sanding Abrasives
More
About Finishing
More
Cushioned Sanding Pads
Sized for tight spaces, these small pads sand flat and curved surfaces. They have a flexible foam layer that gives you more control over sanding pressure, creating finer and more consistent finishes. The abrasive is on the top and bottom. Pads resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.
For technical drawings and 3-D models, click on a part number.
Grit | For Use On | Abrasive Material | Abrasive Backing Material | Sanding Properties | Each | |
2" × 2" | ||||||
---|---|---|---|---|---|---|
For Polished Finish | ||||||
2400 | Steel, Wood | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 00000 |
3" × 4" | ||||||
For Polished Finish | ||||||
2400 | Steel, Wood | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
Cushioned Sanding Sheets
A coating prevents dust and debris from building up on the abrasive surface. These sheets resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.
For technical drawings and 3-D models, click on a part number.
Cushioned Sanding Rolls
A cushioned layer gives you more control over sanding pressure, creating finer and more consistent finishes. These rolls can be cut to length.
For technical drawings and 3-D models, click on a part number.
Cushioned Sanding Sheets for Stainless Steel and Hard Metals
The cushioned layer of these abrasive-embedded cloth sheets gives you more control over sanding pressure, creating finer and more consistent finishes. They resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.
For technical drawings and 3-D models, click on a part number.
Grit | For Use On | Abrasive Material | Abrasive Backing Material | Sanding Properties | Each | |
3" × 6" | ||||||
---|---|---|---|---|---|---|
For Polished Finish | ||||||
2400 | Stainless Steel, Titanium, Steel, Iron, Nickel | Aluminum Oxide | Cloth | Water Resistant, Tear Resistant | 00000000 | 00000 |
6" × 12" | ||||||
For Polished Finish | ||||||
2400 | Stainless Steel, Titanium, Steel, Iron, Nickel | Aluminum Oxide | Cloth | Water Resistant, Tear Resistant | 00000000 | 00000 |
Cushioned Sanding Rolls for Stainless Steel and Hard Metals
A cushioned layer gives you more control over sanding pressure, creating finer and more consistent finishes. These rolls can be cut to length.
For technical drawings and 3-D models, click on a part number.
48 ft. Lg. | |||||||
---|---|---|---|---|---|---|---|
Wd. | For Use On | Abrasive Material | Abrasive Backing Material | Sanding Properties | Grit | Each | |
For Polished Finish | |||||||
1" | Stainless Steel, Titanium, Steel, Iron, Nickel | Aluminum Oxide | Cloth | Tear Resistant | 2400 | 00000000 | 0000000 |
Cushioned Sanding Pads for Stainless Steel and Hard Metals
Sized for tight spaces, these small pads sand flat and curved surfaces. They have a flexible foam layer that gives you more control over sanding pressure, creating finer and more consistent finishes. The abrasive is on the top and bottom. Pads resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.
For technical drawings and 3-D models, click on a part number.
Grit | For Use On | Abrasive Material | Abrasive Backing Material | Sanding Properties | Each | |
2" × 2" | ||||||
---|---|---|---|---|---|---|
For Polished Finish | ||||||
2400 | Stainless Steel, Titanium, Steel, Iron, Nickel | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 00000 |
3" × 4" | ||||||
For Polished Finish | ||||||
2400 | Stainless Steel, Titanium, Steel, Iron, Nickel | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
Cushioned Adhesive-Back Sanding Discs
The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes. These discs resist deterioration when used wet. Press onto a compatible sanding tool or backup pad (sold separately); peel off to remove. Also known as PSA discs. To maintain strong adhesion, clean the pad surface with mild alcohol before applying. Do not use aggressive cleaning solvents such as MEK or acetone, which can damage the adhesive.
For technical drawings and 3-D models, click on a part number.
Dia. | Abrasive Material | Abrasive Backing Material | Sanding Properties | For Use On | For Use With | Choose a Grit | Pkg. Qty. | Pkg. | |
For Polished Finish | |||||||||
---|---|---|---|---|---|---|---|---|---|
2" | Silicon Carbide | Cloth | Water Resistant | Steel, Wood | Grinders for Bits and Burs, Portable Disc Sanders | 2400 | 50 | 00000000 | 000000 |
3" | Silicon Carbide | Cloth | Water Resistant | Steel, Wood | Grinders for Bits and Burs, Portable Disc Sanders | 2400 | 10 | 00000000 | 00000 |
4" | Silicon Carbide | Cloth | Water Resistant | Steel, Wood | Grinders for Bits and Burs, Portable Disc Sanders | 2400 | 10 | 00000000 | 00000 |
4 1/2" | Silicon Carbide | Cloth | Water Resistant | Steel, Wood | Portable Disc Sanders | 2400 | 10 | 00000000 | 00000 |
5" | Silicon Carbide | Cloth | Water Resistant | Steel, Wood | Portable Disc Sanders, Stationary Disc Sanders | 2400 | 10 | 00000000 | 00000 |
6" | Silicon Carbide | Cloth | Water Resistant | Steel, Wood | Portable Disc Sanders, Stationary Disc Sanders | 2400 | 10 | 00000000 | 00000 |
7" | Silicon Carbide | Cloth | Water Resistant | Steel, Wood | Portable Disc Sanders, Stationary Disc Sanders | 2400 | 10 | 00000000 | 00000 |
9" | Silicon Carbide | Cloth | Water Resistant | Steel, Wood | Stationary Disc Sanders | 2400 | 10 | 00000000 | 00000 |
10" | Silicon Carbide | Cloth | Water Resistant | Steel, Wood | Stationary Disc Sanders | 2400 | 10 | 00000000 | 000000 |
12" | Silicon Carbide | Cloth | Water Resistant | Steel, Wood | Stationary Disc Sanders | 10 | 00000000 | 000000 |
Cushioned Adhesive-Back Vacuum Sanding Discs
The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes. Holes allow dust removal when used with a vacuum sander. These discs also resist deterioration when used wet. Press onto a compatible sanding tool or backup pad (sold separately); peel off to remove. Also known as PSA discs. To maintain strong adhesion, clean the pad surface with mild alcohol before applying. Do not use aggressive cleaning solvents such as MEK or acetone, which can damage the adhesive.
For technical drawings and 3-D models, click on a part number.
Dia. | For Vacuum Sander Style | Vacuum Hole Dia. | Abrasive Material | Abrasive Backing Material | Sanding Properties | For Use On | For Use With | Grit | Pkg. Qty. | Pkg. | |
For Polished Finish | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
5" | Five Hole | 3/8" | Silicon Carbide | Cloth | Water Resistant | Steel, Wood | Portable Disc Sanders, Stationary Disc Sanders | 2400 | 10 | 00000000 | 000000 |
6" | Six Hole | 3/8" | Silicon Carbide | Cloth | Water Resistant | Steel, Wood | Portable Disc Sanders, Stationary Disc Sanders | 2400 | 10 | 00000000 | 00000 |
Cushioned Adhesive-Back Sanding Discs for Stainless Steel and Hard Metals
The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes. These discs resist deterioration when used wet. Press onto a compatible sanding tool or backup pad (sold separately); peel off to remove. Also known as PSA discs. To maintain strong adhesion, clean the pad surface with mild alcohol before applying. Do not use aggressive cleaning solvents such as MEK or acetone, which can damage the adhesive.
For technical drawings and 3-D models, click on a part number.
Dia. | Abrasive Material | Abrasive Backing Material | Sanding Properties | For Use On | For Use With | Grit | Pkg. Qty. | Pkg. | |
For Polished Finish | |||||||||
---|---|---|---|---|---|---|---|---|---|
2" | Silicon Carbide | Cloth | Water Resistant | Stainless Steel, Titanium, Steel, Iron, Nickel | Grinders for Bits and Burs, Portable Disc Sanders | 2400 | 50 | 00000000 | 000000 |
3" | Silicon Carbide | Cloth | Water Resistant | Stainless Steel, Titanium, Steel, Iron, Nickel | Grinders for Bits and Burs, Portable Disc Sanders | 2400 | 10 | 00000000 | 00000 |
4" | Silicon Carbide | Cloth | Water Resistant | Stainless Steel, Titanium, Steel, Iron, Nickel | Grinders for Bits and Burs, Portable Disc Sanders | 2400 | 10 | 00000000 | 00000 |
4 1/2" | Silicon Carbide | Cloth | Water Resistant | Stainless Steel, Titanium, Steel, Iron, Nickel | Portable Disc Sanders | 2400 | 10 | 00000000 | 00000 |
5" | Silicon Carbide | Cloth | Water Resistant | Stainless Steel, Titanium, Steel, Iron, Nickel | Portable Disc Sanders, Stationary Disc Sanders | 2400 | 10 | 00000000 | 00000 |
6" | Silicon Carbide | Cloth | Water Resistant | Stainless Steel, Titanium, Steel, Iron, Nickel | Portable Disc Sanders, Stationary Disc Sanders | 2400 | 10 | 00000000 | 00000 |
7" | Silicon Carbide | Cloth | Water Resistant | Stainless Steel, Titanium, Steel, Iron, Nickel | Portable Disc Sanders, Stationary Disc Sanders | 2400 | 10 | 00000000 | 00000 |
9" | Silicon Carbide | Cloth | Water Resistant | Stainless Steel, Titanium, Steel, Iron, Nickel | Stationary Disc Sanders | 2400 | 10 | 00000000 | 00000 |
10" | Silicon Carbide | Cloth | Water Resistant | Stainless Steel, Titanium, Steel, Iron, Nickel | Stationary Disc Sanders | 2400 | 10 | 00000000 | 000000 |
12" | Silicon Carbide | Cloth | Water Resistant | Stainless Steel, Titanium, Steel, Iron, Nickel | Stationary Disc Sanders | 2400 | 10 | 00000000 | 000000 |
Cushioned Hook and Loop Vacuum Sanding Discs
The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes. Holes allow dust removal when used with a vacuum sander. These discs resist deterioration whe used wet. Quickly attach, remove, and reuse with a compatible sanding tool or backup pad (sold separately).
For technical drawings and 3-D models, click on a part number.
Dia. | For Vacuum Sander Style | Vacuum Hole Dia. | Abrasive Material | Abrasive Backing Material | Sanding Properties | For Use On | For Use With | Grit | Pkg. Qty. | Pkg. | |
For Polished Finish | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
5" | Five Hole | 3/8" | Silicon Carbide | Cloth | Water Resistant | Steel, Wood | Portable Disc Sanders, Stationary Disc Sanders | 2400 | 10 | 00000000 | 000000 |
6" | Six Hole | 3/8" | Silicon Carbide | Cloth | Water Resistant | Steel, Wood | Portable Disc Sanders, Stationary Disc Sanders | 2400 | 10 | 00000000 | 00000 |
Cushioned Hook and Loop Sanding Discs
These discs are abrasive-embedded cloth with a cushioned layer that gives you more control over sanding pressure, creating finer and more consistent finishes. They resist deterioration when used wet. Quickly attach, remove, and reuse with a compatible sanding tool or backup pad (sold separately).
For technical drawings and 3-D models, click on a part number.
Dia. | Abrasive Material | Abrasive Backing Material | Sanding Properties | For Use On | For Use With | Choose a Grit | Pkg. Qty. | Pkg. | |
For Polished Finish | |||||||||
---|---|---|---|---|---|---|---|---|---|
2" | Silicon Carbide | Cloth | Water Resistant | Steel, Wood | Grinders for Bits and Burs, Portable Disc Sanders | 2400 | 50 | 00000000 | 000000 |
3" | Silicon Carbide | Cloth | Water Resistant | Steel, Wood | Grinders for Bits and Burs, Portable Disc Sanders | 2400 | 10 | 00000000 | 00000 |
4" | Silicon Carbide | Cloth | Water Resistant | Steel, Wood | Grinders for Bits and Burs, Portable Disc Sanders | 2400 | 10 | 00000000 | 00000 |
4 1/2" | Silicon Carbide | Cloth | Water Resistant | Steel, Wood | Portable Disc Sanders | 2400 | 10 | 00000000 | 00000 |
5" | Silicon Carbide | Cloth | Water Resistant | Steel, Wood | Portable Disc Sanders, Stationary Disc Sanders | 2400 | 10 | 00000000 | 00000 |
6" | Silicon Carbide | Cloth | Water Resistant | Steel, Wood | Portable Disc Sanders, Stationary Disc Sanders | 2400 | 10 | 00000000 | 00000 |
7" | Silicon Carbide | Cloth | Water Resistant | Steel, Wood | Portable Disc Sanders, Stationary Disc Sanders | 2400 | 10 | 00000000 | 00000 |
9" | Silicon Carbide | Cloth | Water Resistant | Steel, Wood | Stationary Disc Sanders | 2400 | 10 | 00000000 | 00000 |
10" | Silicon Carbide | Cloth | Water Resistant | Steel, Wood | Stationary Disc Sanders | 10 | 00000000 | 000000 | |
12" | Silicon Carbide | Cloth | Water Resistant | Steel, Wood | Stationary Disc Sanders | 10 | 00000000 | 000000 |
Hook and Loop Sanding Discs for Stainless Steel and Hard Metals
Quickly attach, remove, and reuse these discs with a compatible sanding tool or backup pad (sold separately). They resist deterioration when used wet.
For technical drawings and 3-D models, click on a part number.
Dia. | Abrasive Material | Abrasive Backing Material | Sanding Properties | For Use On | For Use With | Grit | Pkg. Qty. | Pkg. | |
For Polished Finish | |||||||||
---|---|---|---|---|---|---|---|---|---|
2" | Silicon Carbide | Cloth | Water Resistant | Stainless Steel, Titanium, Steel, Iron, Nickel | Grinders for Bits and Burs, Portable Disc Sanders | 2400 | 50 | 00000000 | 000000 |
3" | Silicon Carbide | Cloth | Water Resistant | Stainless Steel, Titanium, Steel, Iron, Nickel | Grinders for Bits and Burs, Portable Disc Sanders | 2400 | 10 | 00000000 | 00000 |
4" | Silicon Carbide | Cloth | Water Resistant | Stainless Steel, Titanium, Steel, Iron, Nickel | Grinders for Bits and Burs, Portable Disc Sanders | 2400 | 10 | 00000000 | 00000 |
4 1/2" | Silicon Carbide | Cloth | Water Resistant | Stainless Steel, Titanium, Steel, Iron, Nickel | Portable Disc Sanders | 2400 | 10 | 00000000 | 00000 |
5" | Silicon Carbide | Cloth | Water Resistant | Stainless Steel, Titanium, Steel, Iron, Nickel | Portable Disc Sanders, Stationary Disc Sanders | 2400 | 10 | 00000000 | 00000 |
6" | Silicon Carbide | Cloth | Water Resistant | Stainless Steel, Titanium, Steel, Iron, Nickel | Portable Disc Sanders, Stationary Disc Sanders | 2400 | 10 | 00000000 | 00000 |
7" | Silicon Carbide | Cloth | Water Resistant | Stainless Steel, Titanium, Steel, Iron, Nickel | Portable Disc Sanders, Stationary Disc Sanders | 2400 | 10 | 00000000 | 00000 |
9" | Silicon Carbide | Cloth | Water Resistant | Stainless Steel, Titanium, Steel, Iron, Nickel | Stationary Disc Sanders | 2400 | 10 | 00000000 | 00000 |
10" | Silicon Carbide | Cloth | Water Resistant | Stainless Steel, Titanium, Steel, Iron, Nickel | Stationary Disc Sanders | 2400 | 10 | 00000000 | 000000 |
12" | Silicon Carbide | Cloth | Water Resistant | Stainless Steel, Titanium, Steel, Iron, Nickel | Stationary Disc Sanders | 2400 | 10 | 00000000 | 000000 |
Cushioned Sanding Belts
A cushioned layer gives you more control over sanding pressure, creating finer and more consistent finishes. These belts have a coating that prevents dust and debris from building up on the abrasive surface. They also resist deterioration when used with water or cutting fluids.
Wd. | Lg. | Abrasive Material | Abrasive Backing Material | For Use On | Grit | Each | |
For Polished Finish | |||||||
---|---|---|---|---|---|---|---|
1/2" | 12" | Silicon Carbide | Cloth | Steel, Wood | 2400 | 0000000 | 00000 |
1/2" | 18" | Silicon Carbide | Cloth | Steel, Wood | 2400 | 0000000 | 0000 |
1/2" | 24" | Silicon Carbide | Cloth | Steel, Wood | 2400 | 0000000 | 0000 |
1" | 42" | Silicon Carbide | Cloth | Steel, Wood | 2400 | 0000000 | 0000 |
1 1/2" | 60" | Silicon Carbide | Cloth | Steel, Wood | 2400 | 0000000 | 00000 |
2" | 42" | Silicon Carbide | Cloth | Steel, Wood | 2400 | 0000000 | 0000 |
2" | 48" | Silicon Carbide | Cloth | Steel, Wood | 2400 | 0000000 | 00000 |
2" | 60" | Silicon Carbide | Cloth | Steel, Wood | 2400 | 0000000 | 00000 |
2" | 72" | Silicon Carbide | Cloth | Steel, Wood | 2400 | 0000000 | 00000 |
3" | 132" | Silicon Carbide | Cloth | Steel, Wood | 2400 | 0000000 | 00000 |
4" | 36" | Silicon Carbide | Cloth | Steel, Wood | 2400 | 0000000 | 00000 |
6" | 48" | Silicon Carbide | Cloth | Steel, Wood | 2400 | 0000000 | 00000 |
Diamond Lapping Film
Diamond cuts more quickly, lasts longer, and leaves a finer finish than other lapping grains. Lap without the mess of pastes and slurries—abrasive is embedded in the surface of this waterproof film. Grit and microns are approximate.
For technical drawings and 3-D models, click on a part number.
9" Wd. × 11" Lg. | |||||
---|---|---|---|---|---|
Abrasive Grain Size, microns | Grit (For Finish) | Color | For Use On | Each | |
0.5 | 2400 (Polished) | White | Steel, Stainless Steel, Titanium, Aluminum, Brass, Bronze, Copper, Iron, Nickel, Glass, Plastic, Ceramic, Composites | 0000000 | 000000 |
5" Dia. | |||||
---|---|---|---|---|---|
Abrasive Grain Size, microns | Grit (For Finish) | Color | For Use On | Each | |
0.5 | 2400 (Polished) | White | Steel, Stainless Steel, Titanium, Aluminum, Brass, Bronze, Copper, Iron, Nickel, Glass, Plastic, Ceramic, Composites | 00000000 | 000000 |