Coated with aluminum oxide—the most common abrasive material, hard enough to sand steel and wood.

These sheets resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.

A coating prevents dust and debris from building up on the abrasive surface.

Press onto a compatible sanding tool or backup pad; peel off to remove.

Coated with zirconia alumina to stay sharper longer.

The abrasive material on these discs is sharp and dense enough to shape hard metals such as stainless steel, nickel, and iron without dulling quickly.

With more flaps than standard discs, these last 30-40% longer.

With more flaps than standard discs, these last 30-40% longer.

A heavy duty backing plate provides more support than standard discs for heavy material removal.

Replace your sanding discs less often—the backing plate on these discs can be trimmed off as the abrasive flaps wear down, allowing you to use more of the disc.

These discs have a harder abrasive than standard flap sanding discs for corners.

These discs have a harder abrasive than standard flap sanding discs.

Replace your sanding discs less often—the backing plate on these discs can be trimmed off as the abrasive flaps wear down, allowing you to use more of the disc.

A coating prevents dust and debris from building up on the abrasive surface.

The zirconia alumina grit on these discs continually fractures to produce new, sharp cutting edges that aggressively remove material from steel and wood.

The abrasive flaps wrap around the outer edge of these discs to reach in and sand welds at right angles (fillet welds).

Smooth or shape work surfaces. Good for general purpose sanding, the aluminum oxide abrasive on these belts is tough and won’t crack under stress.

These belts resist deterioration when used with water or cutting fluids.

Dense and hard, the ceramic alumina abrasive on these belts removes material faster and lasts longer than standard aluminum oxide abrasives.

Fit these wheels over your tool's arbor. The flexible flaps reduce gouging while producing a uniform finish on flat and curved surfaces.