We will reply to your message within an hour.
More
Create smooth finishes on wood.
These rolls can be cut to length.
A thicker, heavier construction than standard rolls withstands tough sanding.
These sheets resist deterioriation when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.
These cut-to-length rolls resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.
A coating prevents dust and debris from building up on the abrasive surface.
Flexible enough to sand around curves and in corners, these sponges provide the comfort and control of a sanding block. They have a long-lasting diamond abrasive on one side.
These sheets have a long lasting diamond abrasive.
Cut the length you need, then stick to your sanding tool. When it's time to change the sheet, peel it off.
These sheets have a long-lasting diamond abrasive.
Cut the length you need, then quickly attach, remove, and reuse.
Cut to convenient sizes and shapes, these fit most sheet sanders.
Quickly attach, remove, and reuse these hook-and-loop sheets with triangular detail sanders.
Peel and stick to your file handle. When it’s time to change the sheet, peel it off.
Quickly attach, remove, and reuse.
Press onto a compatible sanding tool or backup pad; peel off to remove.
These discs have a long-lasting diamond abrasive.
Holes allow dust removal when used with a vacuum sander.
Quickly attach, remove, and reuse these discs with a compatible sanding tool or backup pad.
A special fastener on the back of these discs allows you to easily swap one disc for another.
These discs have a harder abrasive than standard quick-change discs.
The heavy duty construction provides more support than standard discs for heavy material removal.
The outer 3/8" of these discs is extremely flexible to prevent marring or gouging your work when sanding a radius or contour.
These discs have a harder abrasive than standard flexible-edge quick-change discs.
The premium abrasive stays sharp longer.
Fit these discs over your tool's arbor.
Holes in the disc let you see the surface you’re sanding.
Fit these discs over your tool’s arbor to sand stainless steel and hard metals.
The premium abrasive stays sharp longer. Holes in the disc let you see the surface you’re sanding.
Fit these discs over your tool's arbor to sand aluminum, soft metals, and nonmetals.
With more flaps than standard discs, these last 30-40% longer.
Overlapping abrasive flaps bonded to a backing plate provide consistent material removal and even finishes.
These discs have a harder abrasive than standard flap sanding discs.
The backing plate on these discs can be sheared away as the abrasive flaps wear down, allowing you to use more of the disc rather than replacing with a new one.
The flaps alternate between an abrasive to remove material and a lubricant that minimizes heat to reduce discoloration of the work surface.
A heavy duty backing plate provides more support than standard discs for heavy material removal.
Set at an angle and widely spaced, the overlapping abrasive flaps reach into corners.
These discs have a harder abrasive than standard flap sanding discs for corners.
The flaps have an abrasive to remove material and a lubricant that minimizes heat to reduce discoloration of the work surface.
The flaps wrap around the outer edge of these discs to sand welds at right angles.
Set at an angle and widely spaced, the flaps reach into corners.
These belts resist deterioration when used with water or cutting fluids.
The widely spaced grains prevent dust and debris from building up on the abrasive surface.
These belts have a long-lasting diamond abrasive.
These belts have a tear-resistant backing.
Use these narrow belts on hand-held sanding sticks.
Secure the shank into the collet or chuck of your tool.
An additive in the abrasive resists heat.
The abrasive‐embedded mesh construction gives you more control over sanding pressure, creating finer and more consistent finishes.
The threaded stud allows faster wheel changes but requires the use of an adapter in your tool.
Fit these wheels over your tool's arbor. The flexible flaps reduce gouging while producing a uniform finish on flat and curved surfaces.
With alternating cloth and nylon mesh abrasive flaps, these wheels are more flexible and produce finer finishes than all-cloth flap sanding wheels.
Polish, clean, and debur deep inside tubes and cylinders.
With alternating cloth and nylon mesh abrasive flaps, these wheels are more flexible and produce finer finishes than all-cloth flap wheels.
Shape, debur, and sand edges and internal surfaces.
The tungsten carbide abrasive is extremely durable.
Flexible flaps reduce gouging while producing a uniform finish on flat and curved surfaces. They provide more control than a standard sanding sleeve but are more aggressive than a traditional flap wheel. As the flaps wear, new abrasive is exposed.
As the outer layer wears away, new abrasive is exposed.
Slip a cap onto the head of a shank and sand small, recessed, and hard-to-reach areas.
Choose a bit with the same angle as your countersink to debur the inside of the hole.
Sand inside pipes and tubes as well as on an angle to reach into corners and slots.
The rubber backing cushions the abrasive to prevent gouging your aluminum, soft metal, and nonmetal work surfaces.
Use these wheels for precision grinding on surface, cylindrical, and tool and cutter grinders. They are also known as Type 1 wheels and straight wheels.
A more durable abrasive allows these wheels to remove more material and last longer than Norton General Purpose Grinding Wheels. They are also known as Type 1 wheels and straight wheels.
The porous bond leaves more space between abrasive grains so heavy amounts of chips and coolant easily flow through.
Unlike aluminum oxide wheels, these silicon carbide wheels won’t clog when grinding soft metals.
The special shapes of these wheels provide more clearance than typical straight wheels.
Typically used with cylindrical, surface, and ID grinders, these wheels are specially designed to grind the inside diameter of workpieces.
Remove material and shape metal cylindrical forms or parts without the need for centers or fixtures.
Use these wheels for light grinding, deburring, and sharpening.
Designed to stand up to heavy use, these wheels remove more material than our general purpose grinding wheels.
Heat-dissipating holes reduce material buildup and extend the life of the wheel. Wheels have a semiflexible backing that conforms to curved and rough surfaces.
The flexible backing on these wheels conforms to curved and rough surfaces.
Shape and smooth wood, fiberglass, and rubber surfaces or remove rust from metal.
Apply this general purpose tape to any surface that requires traction.
Metal abrasives embedded in a metal backing allow this tape to last far longer than other antislip tape. It is often used to cover larger areas than other antislip tape, such as walkways and ramps.
Make stairs, ramps, and walkways safer with this eye-catching, high-traction tape.