Create smooth finishes on wood.

A thicker, heavier construction than standard rolls withstands tough sanding.

These cut-to-length rolls resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.

A coating prevents dust and debris from building up on the abrasive surface.

The long sides are angled 75°.

These cut-to-length rolls resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding. A layer of mesh lets sanding dust and debris escape during use, preventing material buildup on the abrasive surface.

Cut the length you need, then stick to your sanding tool. When it's time to change the sheet, peel it off.

Create consistent finishes on stainless steel, titanium, steel, iron, and nickel.

Quickly attach, remove, and reuse.

Cut to convenient sizes and shapes, these fit most sheet sanders.

Quickly attach, remove, and reuse these hook-and-loop sheets with triangular detail sanders.

A coating prevents dust and debris from building up on the abrasive surface.

A coating prevents dust and debris from building up on the abrasive surface.

The premium abrasive stays sharp longer.

The premium abrasive lasts longer as well as cuts faster and produces a more consistent finish than standard hook and loop discs.

Quickly attach, remove, and reuse these discs with a compatible sanding tool or backup pad.

The premium abrasive stays sharp longer.

The heavy duty construction provides more support than standard discs for heavy material removal.

These discs have a harder abrasive than standard flexible-edge quick-change discs.

The premium abrasive stays sharp longer.

The heavy duty construction provides more support than standard discs for heavy material removal.

The premium abrasive stays sharp longer.

Holes in the disc let you see the surface you’re sanding.

A coating prevents dust and debris from building up on the abrasive surface.

The premium abrasive stays sharp longer.

Fit these discs over your tool's arbor to sand aluminum, soft metals, and nonmetals.

Overlapping abrasive flaps bonded to a backing plate provide consistent material removal and even finishes.

These discs have a harder abrasive than standard flap sanding discs.

A heavy duty backing plate provides more support than standard discs for heavy material removal.

These discs have a harder abrasive than standard flap sanding discs for corners.

With more flaps than standard discs, these last 30-40% longer.

The flaps have an abrasive to remove material and a lubricant that minimizes heat to reduce discoloration of the work surface.

Set at an angle and widely spaced, the flaps reach into corners.

A coating prevents dust and debris from building up on the abrasive surface.

The flaps have an abrasive to remove material and a lubricant that minimizes heat to reduce discoloration of the work surface.

Set at an angle and widely spaced, the flaps reach into corners.

Use these discs with commercial floor buffing machines to sand wood floors.

The premium abrasive stays sharp longer.

The widely spaced grains prevent dust and debris from building up on the abrasive surface.

These belts have a long-lasting diamond abrasive.

Use these narrow belts on hand-held sanding sticks.

The premium abrasive stays sharp longer.

The abrasive‐embedded mesh construction gives you more control over sanding pressure, creating finer and more consistent finishes.

The premium abrasive stays sharp longer.

Fit these wheels over your tool's arbor. The flexible flaps reduce gouging while producing a uniform finish on flat and curved surfaces.

With alternating cloth and nylon mesh abrasive flaps, these wheels are more flexible and produce finer finishes than all-cloth flap sanding wheels.

The premium abrasive stays sharp longer.

A coating prevents dust and debris from building up on the abrasive surface. These sleeves shape, deburr, and sand edges and internal surfaces.

As the outer layer wears away, new abrasive is exposed.

Choose a bit with the same angle as your countersink to debur the inside of the hole.

The rubber backing cushions the abrasive to prevent gouging your aluminum, soft metal, and nonmetal work surfaces.

A more durable abrasive allows these wheels to remove more material and last longer than Norton General Purpose Grinding Wheels. They are also known as Type 1 wheels and straight wheels.

The special shapes of these wheels provide more clearance than typical straight wheels.

Designed to stand up to heavy use, these wheels remove more material than our general purpose grinding wheels.

A combination of cotton laminate and aluminum oxide abrasive creates a smoother surface than other grinding wheels with similar grits.