Cut wood, plywood, and particleboard.

Also known as dado-head blades, these are for cutting grooves in all types of wood.

Produce smooth cuts in plastic materials including polycarbonate, polyurethane, PVC, and acrylic with the carbide-tipped teeth on these blades.

A continuous edge on these blades produces smooth cuts.

A continuous edge on these blades produces smooth cuts.

Use with water or coolant to produce smoother cuts in tile than dry-cutting blades. They're also for use on glass.

The carbide-grit edge on these blades cuts brittle and abrasive materials including glass and fiberglass.

Teeth are carbide tipped and designed to push chips away from the blade to prevent clogging and produce smooth cuts in aluminum sheets, tubing, and T-slotted framing.

Cut stainless steel sheets, pipe, tubing, and grating with teeth made of impact-resistant carbide.

Cut wood, plywood, and particleboard.

Square-shaped teeth cut across the grain and with the grain (ripping) in reclaimed lumber and flooring with embedded nails.

Produce smooth cuts in plastic materials including polycarbonate, polyurethane, PVC, and acrylic with the carbide-tipped teeth on this blade.

A continuous edge on these blades produces smooth cuts.

A continuous edge on these blades produces smooth cuts. It's coated in diamond grit to cut hard, abrasive materials such as masonry, stone, asphalt, and concrete.

A blend of tungsten carbide and diamond grits on the continuous edge of these blades cuts hard, nonmetallic materials including composites and graphite.

Make fast, clean cuts in steel sheets, angle iron, rebar, and pipe with the carbide teeth on these blades.

Cut stainless steel sheets, pipe, tubing, and grating with teeth made of impact-resistant carbide.

Cut plastic, wood, and soft metal such as aluminum, brass, and copper.

A tungsten carbide grit edge cuts through abrasive materials such as composites and fiberglass.

Blades and teeth are steel and treated to a Rockwell Hardness between C63 and C65 for increased wear resistance when cutting through steel and cast iron bars, rods, pipe, and tubing.

These blades have a higher concentration of diamonds than other dry-cutting blades, so they last up to three times longer.

Teeth vary in size, number per inch, and pattern to reduce vibration, so they create a smoother finish than Long-Life Band Saw Blades. They're also known as variable-set blades.

Make clog-free cuts in thick cross sections of steel, aluminum, brass, bronze, wood, and plastic. These blades have forward-angled teeth and plenty of space for chips to collect.

Teeth vary in size, number per inch, and pattern to reduce vibration, so they create a smoother finish than Long-Life Band Saw Blades for Thin Metal. They're also known as variable-set blades.

These carbon steel blades are good for making straight cuts.

Make straight cuts with these carbon steel blades.

These are also known as scallop-edge blades.

Titanium aluminum nitride (TiAlN) coated, precision-ground teeth cut quickly and leave a smooth edge on stainless steel, nickel, and titanium.

The teeth on these steel blades are carbide tipped, so they'll last longer and produce a smoother cut than other band saw blades when cutting fiberglass, plastic, and composites.

These rigid carbon steel blades make straight cuts.

Made from flexible carbon steel, these blades cut curves.

These carbon steel blades are rigid to make straight cuts.

Cut straight lines with these rigid carbon steel blades.

These blades have teeth with a constant size and number per inch throughout the blade.

Teeth vary in size, number per inch, and pattern to reduce vibration, so they create a smoother cut than Long-Life Band Saw Blade Coil Stock for Thin Metal. They're also known as variable-set blades.

The teeth on these blades are V-shaped and tightly spaced to cut more quickly than scallop-edge blades.

Make straight cuts with these rigid carbon steel blades.

Tooth size and number per inch are constant throughout the blade

Tooth size and number per inch are constant throughout these blades.

The teeth on these blades are set in a pattern specially designed to cut faster than other blades for metal.

Teeth are coated with wear-resistant titanium nitride (TiN) so they last longer than blades with uncoated teeth.

A pointed tip makes plunge cuts in metal.

The teeth on these blades vary in size and pattern to reduce vibration and produce smooth cuts. They're also known as variable-set blades.

The teeth on these blades are carbide-tipped so they last longer than long-life blades with coated teeth.

Also known as demolition blades, these wide blades cut through multiple layers.

Also known as variable-set blades, the teeth on these vary in size and pattern to reduce vibration and produce smooth cuts.

Tooth size and number per inch are constant throughout these blades.

Teeth are V-shaped teeth to cut on forward and backward strokes for fast cuts.

Also known as demolition blades, these are wide for cutting through multiple layers of wood.

The diamond grit bonded to the edge of these steel blades lasts up to 30 times longer and cuts twice as fast as carbide grit.

The teeth are V-shaped to cut on forward and backward strokes for fast cuts through drywall.

Two layers of fiberglass mesh reinforcement give these wheels at least three times the life of standard cutoff wheels when cutting metal such as aluminum, iron, stainless steel, and steel.

Use these clog-resistant zirconia alumina wheels to make quick cuts in soft metal such as aluminum, brass, and copper.

Switch between cutting and deburring aluminum, iron, stainless steel, and steel without the need to change your wheel.

Also known as Type 27, raised-hub, and depressed-center cutoff wheels, these wheels outperform Type 1 wheels when making flush cuts.

Prevent corrosion and discoloration on stainless steel—these wheels contain less than 0.1% iron, chloride, and sulfur contaminants.

Made of premium grade of abrasives, these wheels are strong and thick for making notches in stainless steel.

Also known as Type 27, raised-hub, and depressed-center cutoff wheels, these wheels outperform Type 1 wheels when making flush cuts.

These steel wheels have a diamond grit edge, so they last longer than standard bench-grinder cutoff wheels when cutting hard, nonferrous materials such as carbide, ceramics, and glass.

Make cuts in hard, brittle materials such as firebrick, stone, and concrete.

These non-reinforced aluminum oxide wheels create the nearly polished finish required for testing metal.

These wheels are thinner than standard bench-top cutoff saw wheels, so they cut through aluminum, iron, stainless steel, and steel more quickly.

Use these clog-resistant wheels to make quick cuts in soft metal such as aluminum, brass, and copper.