Teeth are carbide tipped and designed to push chips away from the blade to prevent clogging and produce smooth cuts in aluminum sheets, tubing, and T-slotted framing.

Tooth size and number per inch are constant throughout the blade

Tooth size and number per inch are constant throughout the blade.

Cut structural shapes such as I-beams and angle iron as well as bundles of structural shapes and tubing with less tooth breakage than other blades. The teeth are reinforced, forward-angled, and widely spaced to leave room for chips to collect.

Made from flexible carbon steel, these blades cut curves.

Cut curves with these flexible carbon steel blades.

Also known as variable-set blades, these have teeth that vary in size, number per inch, and pattern to reduce vibration so they create a smoother cut than Portable Band Saw Blades.

The teeth on these blades vary in size, number per inch, and pattern to reduce vibration, so they create a smoother cut than Portable Band Saw Blades for Thin Metal. They're also known as variable-set blades.

These blades have teeth with a constant size and number per inch throughout the blade.

Teeth vary in size, number per inch, and pattern to reduce vibration, so they create a smoother cut than Long-Life Band Saw Blade Coil Stock for Thin Metal. They're also known as variable-set blades.

Made from flexible carbon steel, these blades bend to cut curves.

These flexible carbon steel blades bend to cut curves.

Two layers of fiberglass mesh reinforcement give these fast-cutting, zirconia alumina wheels at least three times the life of standard cutoff wheels when aluminum, iron, stainless steel, and steel.

Designed to cut sheet metal.

Use these clog-resistant wheels to make quick cuts in soft metal such as aluminum, brass, and copper.

These high-density ceramic oxide wheels have two layers of fiberglass mesh reinforcement and last up to twice as long as long-life cutoff wheels when cutting aluminum, iron, stainless steel, and steel.

Run these high-density aluminum oxide wheels at higher speeds than standard cutoff wheels to make quick cuts in aluminum, iron, stainless steel, and steel.

Made of premium grade abrasives, these wheels are strong and thick for making notches in aluminum, iron, stainless steel, and steel.

Use these wheels for cutting soft metal, plastic, stone, and wood.

The carbide teeth on these saws last up to twice as long as high-speed steel teeth.

Quickly connect these saws to your drill or drill press with the built-in arbor.

The carbide-tipped teeth on these saws last up to twice as long as high-speed steel teeth.

Make clean, fast cuts in thin metal and plastic when you use one of these saws with an impact driver. The body widens at the top to prevent the saw from pushing through your workpiece.

The carbide teeth on these steel saws cut aluminum, brass, bronze, steel, and plastic sheets and last up to twice as long as high-speed steel teeth.

Use these saws with a drill press to cut a variety of hole sizes in sheet metal.

These kits have saws with high-speed steel teeth and a steel body.