Circular Saw Blades for Cast Iron
Diamond grit bonded to a segmented edge cuts through hard metal such as cast iron. Use dry or with water or coolant (not included). All blades come with a reducer bushing to adjust the arbor diameter. Blades with a narrower width of cut make faster cuts with less material loss. For the blade with a round/diamond arbor, detach the center piece to expose the diamond shape.
For technical drawings and 3-D models, click on a part number.
Material | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Cutting Application | Diamond Depth | Edge Style | Includes | Each | |
4" Dia. | |||||||||||
5/8", 7/8" | Round | 0.08" | 15,000 | Diamond | Steel | Dry, Wet | 0.2" | Segmented | Reducer Bushing | 0000000 | 000000 |
4 1/2" Dia. | |||||||||||
5/8", 7/8" | Round | 0.08" | 13,300 | Diamond | Steel | Dry, Wet | 0.2" | Segmented | Reducer Bushing | 0000000 | 00000 |
7" Dia. | |||||||||||
5/8", 7/8" | Round/Diamond | 0.095" | 8,730 | Diamond | Steel | Dry, Wet | 0.2" | Segmented | Reducer Bushing | 0000000 | 000000 |
Miter, Chop, and Table Saw Blades for Cast Iron
Diamond grit bonded to a segmented edge cuts through hard metal such as cast iron. Use dry or with water or coolant (not included). Blades come with a reducer bushing to adjust the arbor diameter.
For technical drawings and 3-D models, click on a part number.
Material | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Cutting Application | Diamond Depth | Edge Style | Includes | Each | |
12" Dia. | |||||||||||
20 mm, 1" | Round | 0.125" | 6,300 | Diamond | Steel | Dry, Wet | 0.2" | Segmented | Reducer Bushing | 0000000 | 0000000 |
14" Dia. | |||||||||||
20 mm, 1" | Round | 0.125" | 5,400 | Diamond | Steel | Dry, Wet | 0.2" | Segmented | Reducer Bushing | 0000000 | 000000 |
Cold Saw Blades for Steel and Cast Iron
Blades and teeth are steel and treated to a Rockwell Hardness between C63 and C65 for increased wear resistance when cutting through steel and cast iron bars, rods, pipe, and tubing. Choose blades with more teeth for a smoother cut.
For technical drawings and 3-D models, click on a part number.
Material | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Number of Teeth | Width of Cut | Max. Speed, rpm | Hook Angle | Tooth | Body | Hardness | Each | |
9" Dia. | ||||||||||
32 mm | Round | 120 | 0.078" | 65 | 15° | Steel | Steel | Rockwell C63-C65 | 0000000 | 000000 |
40 mm | Round | 120 | 0.078" | 65 | 15° | Steel | Steel | Rockwell C63-C65 | 0000000 | 00000 |
10" Dia. | ||||||||||
32 mm | Round | 180 | 0.078" | 65 | 15° | Steel | Steel | Rockwell C63-C65 | 0000000 | 00000 |
40 mm | Round | 180 | 0.078" | 65 | 15° | Steel | Steel | Rockwell C63-C65 | 0000000 | 00000 |
11" Dia. | ||||||||||
32 mm | Round | 180 | 0.098" | 65 | 15° | Steel | Steel | Rockwell C63-C65 | 0000000 | 000000 |
40 mm | Round | 180 | 0.098" | 65 | 15° | Steel | Steel | Rockwell C63-C65 | 0000000 | 000000 |
12" Dia. | ||||||||||
32 mm | Round | 140 | 0.098" | 65 | 15° | Steel | Steel | Rockwell C63-C65 | 0000000 | 000000 |
32 mm | Round | 220 | 0.098" | 65 | 15° | Steel | Steel | Rockwell C63-C65 | 0000000 | 000000 |
40 mm | Round | 140 | 0.098" | 65 | 15° | Steel | Steel | Rockwell C63-C65 | 0000000 | 000000 |
40 mm | Round | 220 | 0.098" | 65 | 15° | Steel | Steel | Rockwell C63-C65 | 0000000 | 000000 |
12 1/2" Dia. | ||||||||||
32 mm | Round | 160 | 0.098" | 65 | 15° | Steel | Steel | Rockwell C63-C65 | 0000000 | 000000 |
32 mm | Round | 180 | 0.098" | 65 | 15° | Steel | Steel | Rockwell C63-C65 | 0000000 | 000000 |
40 mm | Round | 160 | 0.098" | 65 | 15° | Steel | Steel | Rockwell C63-C65 | 0000000 | 000000 |
40 mm | Round | 180 | 0.098" | 65 | 15° | Steel | Steel | Rockwell C63-C65 | 0000000 | 000000 |
14" Dia. | ||||||||||
32 mm | Round | 180 | 0.098" | 65 | 15° | Steel | Steel | Rockwell C63-C65 | 0000000 | 000000 |
32 mm | Round | 280 | 0.098" | 65 | 15° | Steel | Steel | Rockwell C63-C65 | 0000000 | 000000 |
40 mm | Round | 180 | 0.098" | 65 | 15° | Steel | Steel | Rockwell C63-C65 | 0000000 | 000000 |
40 mm | Round | 280 | 0.098" | 65 | 15° | Steel | Steel | Rockwell C63-C65 | 0000000 | 000000 |
Long-Life Hole Saws
For 9/16"-1 3/16"
Dia. Saws
for 1 1/4" Dia.
Saws or Greater
The carbide teeth on these saws last up to twice as long as high-speed steel teeth when cutting fiberglass, plastic, wood, and metal such as aluminum, cast iron, steel, and stainless steel. Attach saws to a drill or drill press. An arbor with pilot drill (sold separately) is required.
Saws | Arbor with Pilot Drill with 1/4" Hex Shank | Arbor with Pilot Drill with 3/8" Hex Shank | Arbor with Pilot Drill with 7/16" Hex Shank | Replacement Pilot Drill for 1/4", 3/8", & 7/16" Hex Shank | |||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | For Arbor Thread Size | Each | Each | Each | Each | Each | |||||
1 15/16" Cutting Dp. | |||||||||||
9/16" | 1/2"-20 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 00000 |
5/8" | 1/2"-20 | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
11/16" | 1/2"-20 | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
3/4" | 1/2"-20 | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
25/32" | 1/2"-20 | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
13/16" | 1/2"-20 | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
7/8" | 1/2"-20 | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
15/16" | 1/2"-20 | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
1" | 1/2"-20 | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
1 1/16" | 1/2"-20 | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
1 1/8" | 1/2"-20 | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
1 3/16" | 1/2"-20 | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
Saws | Arbor with Pilot Drill with 3/8" Hex Shank | Arbor with Pilot Drill with 7/16" Hex Shank | Replacement Pilot Drill for 1/4", 3/8", & 7/16" Hex Shank | ||||||
---|---|---|---|---|---|---|---|---|---|
Dia. | For Arbor Thread Size | Each | Each | Each | Each | ||||
1 15/16" Cutting Dp. | |||||||||
1 1/4" | 5/8"-18 | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 00000 |
1 5/16" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
1 3/8" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
1 7/16" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
1 1/2" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
1 9/16" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
1 5/8" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
1 11/16" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
1 3/4" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
1 13/16" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
1 7/8" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
2" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
2 1/16" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
2 1/8" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
2 1/4" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
2 5/16" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
2 3/8" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
2 1/2" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
2 9/16" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
2 5/8" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
2 3/4" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
2 7/8" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
3" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
3 1/8" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
3 1/4" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
3 3/8" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
3 1/2" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
3 5/8" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
3 3/4" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
3 7/8" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
4" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
4 1/8" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
4 1/4" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
4 3/8" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
4 1/2" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
4 3/4" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
5" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
5 1/4" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
5 1/2" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
5 3/4" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
6" | 5/8"-18 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
Hole Saws with Built-In Arbor
Quickly connect these saws to your drill or drill press with the built-in arbor. Saws have high-speed steel teeth for cutting wood, plastic, and metal. A 1/4" diameter pilot drill is included.
For technical drawings and 3-D models, click on a part number.
Dia. | Arbor Shank Size | Each | |
1 15/16" Cutting Dp. | |||
---|---|---|---|
9/16" | 3/8" | 0000000 | 000000 |
5/8" | 3/8" | 00000000 | 00000 |
11/16" | 3/8" | 00000000 | 00000 |
3/4" | 3/8" | 00000000 | 00000 |
13/16" | 3/8" | 00000000 | 00000 |
7/8" | 3/8" | 00000000 | 00000 |
15/16" | 3/8" | 00000000 | 00000 |
1" | 3/8" | 00000000 | 00000 |
1 1/16" | 3/8" | 00000000 | 00000 |
1 1/8" | 3/8" | 00000000 | 00000 |
1 3/16" | 3/8" | 0000000 | 00000 |
1 1/4" | 3/8" | 00000000 | 00000 |
1 5/16" | 3/8" | 00000000 | 00000 |
1 3/8" | 3/8" | 00000000 | 00000 |
1 7/16" | 3/8" | 00000000 | 00000 |
1 1/2" | 3/8" | 00000000 | 00000 |
1 9/16" | 3/8" | 00000000 | 00000 |
1 5/8" | 3/8" | 00000000 | 00000 |
1 11/16" | 3/8" | 00000000 | 00000 |
1 3/4" | 3/8" | 00000000 | 00000 |
1 13/16" | 3/8" | 0000000 | 00000 |
1 7/8" | 3/8" | 00000000 | 00000 |
2" | 3/8" | 00000000 | 00000 |
2 1/16" | 3/8" | 00000000 | 00000 |
2 1/8" | 3/8" | 00000000 | 00000 |
2 1/4" | 3/8" | 00000000 | 00000 |
2 5/16" | 3/8" | 00000000 | 00000 |
2 3/8" | 3/8" | 00000000 | 00000 |
2 1/2" | 3/8" | 00000000 | 00000 |
2 9/16" | 3/8" | 00000000 | 00000 |
2 5/8" | 3/8" | 0000000 | 00000 |
2 3/4" | 3/8" | 00000000 | 00000 |
2 7/8" | 3/8" | 00000000 | 00000 |
3" | 3/8" | 00000000 | 00000 |
3 1/8" | 3/8" | 00000000 | 00000 |
3 1/4" | 3/8" | 00000000 | 00000 |
3 3/8" | 3/8" | 00000000 | 00000 |
3 1/2" | 3/8" | 00000000 | 00000 |
3 5/8" | 3/8" | 00000000 | 00000 |
3 3/4" | 3/8" | 00000000 | 00000 |
3 7/8" | 3/8" | 00000000 | 00000 |
4" | 3/8" | 00000000 | 00000 |
4 1/8" | 11/32" | 00000000 | 00000 |
4 1/4" | 11/32" | 00000000 | 00000 |
4 3/8" | 11/32" | 0000000 | 00000 |
4 1/2" | 11/32" | 00000000 | 00000 |
4 3/4" | 11/32" | 0000000 | 000000 |
5" | 11/32" | 00000000 | 000000 |
5 1/2" | 11/32" | 0000000 | 000000 |
6" | 11/32" | 0000000 | 000000 |
Large Diameter Hole Saws
for 1 1/4" Dia.
Saws or Greater
and 4" Cut
Depth Saws
These saws have high-speed steel teeth for cutting wood, plastic, and metal. Attach them to a drill or drill press. An arbor (sold separately) is required. Arbor for 1 1/2" cut depth saws includes a pilot drill. Pilot drill for arbor that fits 2" and 4" cut depth saws is sold separately.
For technical drawings and 3-D models, click on a part number.
Saws | Pilot Drill | Arbors with Pilot Drill | Arbors | ||||||
---|---|---|---|---|---|---|---|---|---|
Diameter | For Arbor Thread Size | Each | Each | Each | Each | ||||
1 1/2"Cutting Dp. | |||||||||
6 1/4" | 5/8"-18 | 00000000 | 0000000 | 0000000 | 00000 | 0000000 | 000000 | 000000 | 00 |
6 1/2" | 5/8"-18 | 0000000 | 000000 | 0000000 | 0000 | 0000000 | 00000 | 000000 | 00 |
6 3/4" | 5/8"-18 | 00000000 | 000000 | 0000000 | 0000 | 0000000 | 00000 | 000000 | 00 |
7" | 5/8"-18 | 0000000 | 000000 | 0000000 | 0000 | 0000000 | 00000 | 000000 | 00 |
7 1/4" | 5/8"-18 | 00000000 | 000000 | 0000000 | 0000 | 0000000 | 00000 | 000000 | 00 |
7 1/2" | 5/8"-18 | 00000000 | 000000 | 0000000 | 0000 | 0000000 | 00000 | 000000 | 00 |
7 3/4" | 5/8"-18 | 00000000 | 000000 | 0000000 | 0000 | 0000000 | 00000 | 000000 | 00 |
8" | 5/8"-18 | 0000000 | 000000 | 0000000 | 0000 | 0000000 | 00000 | 000000 | 00 |
2"Cutting Dp. | |||||||||
6 5/8" | 7/8"-9 | 00000000 | 000000 | 00000000 | 0000 | 000000 | 00 | 0000000 | 000000 |
6 3/4" | 7/8"-9 | 00000000 | 000000 | 00000000 | 0000 | 000000 | 00 | 0000000 | 00000 |
7" | 7/8"-9 | 0000000 | 000000 | 00000000 | 0000 | 000000 | 00 | 0000000 | 00000 |
8" | 7/8"-9 | 0000000 | 000000 | 00000000 | 0000 | 000000 | 00 | 0000000 | 00000 |
9" | 7/8"-9 | 0000000 | 000000 | 00000000 | 0000 | 000000 | 00 | 0000000 | 00000 |
4"Cutting Dp. | |||||||||
6" | 7/8"-9 | 0000000 | 000000 | 0000000 | 00000 | 000000 | 00 | 0000000 | 00000 |
7" | 7/8"-9 | 0000000 | 000000 | 0000000 | 00000 | 000000 | 00 | 0000000 | 00000 |
8" | 7/8"-9 | 0000000 | 000000 | 0000000 | 00000 | 000000 | 00 | 0000000 | 00000 |
For Arbor Thread Size | |
7/8"-9 | 0000000 |
Long-Life Large Diameter Hole Saws
The carbide-tipped teeth on these saws last up to twice as long as high-speed steel teeth when cutting wood, plastic, and metal. They also cut fiberglass and laminates. Attach them to a drill or drill press. An arbor with pilot drill (sold separately) is required.
For technical drawings and 3-D models, click on a part number.
Saws | Arbor | Pilot Drill | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
Dia. | For Arbor Thread Size | Each | Shank Size | Each | O'all Lg. | Shank Size | Each | |||
1 1/2" Cutting Dp. | ||||||||||
6 1/4" | 7/8"-9 | 00000000 | 0000000 | 1/2" | 0000000 | 000000 | 5" | 0.368" | 00000000 | 00000 |
6 1/2" | 7/8"-9 | 00000000 | 000000 | 1/2" | 0000000 | 00000 | 5" | 0.368" | 00000000 | 0000 |
6 5/8" | 7/8"-9 | 00000000 | 000000 | 1/2" | 0000000 | 00000 | 5" | 0.368" | 00000000 | 0000 |
6 3/4" | 7/8"-9 | 00000000 | 000000 | 1/2" | 0000000 | 00000 | 5" | 0.368" | 00000000 | 0000 |
7" | 7/8"-9 | 00000000 | 000000 | 1/2" | 0000000 | 00000 | 5" | 0.368" | 00000000 | 0000 |
7 1/4" | 7/8"-9 | 00000000 | 000000 | 1/2" | 0000000 | 00000 | 5" | 0.368" | 00000000 | 0000 |
7 1/2" | 7/8"-9 | 00000000 | 000000 | 1/2" | 0000000 | 00000 | 5" | 0.368" | 00000000 | 0000 |
8" | 7/8"-9 | 00000000 | 000000 | 1/2" | 0000000 | 00000 | 5" | 0.368" | 00000000 | 0000 |
8 3/4" | 7/8"-9 | 00000000 | 000000 | 1/2" | 00000000 | 00000 | 6" | 1/2" | 0000000 | 00000 |
10" | 7/8"-9 | 00000000 | 000000 | 1/2" | 00000000 | 00000 | 6" | 1/2" | 0000000 | 00000 |
2" Cutting Dp. | ||||||||||
6 1/4" | 7/8"-9 | 00000000 | 000000 | 1/2" | 0000000 | 00000 | 5" | 0.368" | 00000000 | 0000 |
6 1/2" | 7/8"-9 | 00000000 | 000000 | 1/2" | 0000000 | 00000 | 5" | 0.368" | 00000000 | 0000 |
6 5/8" | 7/8"-9 | 00000000 | 000000 | 1/2" | 0000000 | 00000 | 5" | 0.368" | 00000000 | 0000 |
6 3/4" | 7/8"-9 | 0000000 | 000000 | 1/2" | 0000000 | 00000 | 5" | 0.368" | 00000000 | 0000 |
7" | 7/8"-9 | 0000000 | 000000 | 1/2" | 0000000 | 00000 | 5" | 0.368" | 00000000 | 0000 |
7 1/4" | 7/8"-9 | 00000000 | 000000 | 1/2" | 0000000 | 00000 | 5" | 0.368" | 00000000 | 0000 |
7 1/2" | 7/8"-9 | 00000000 | 000000 | 1/2" | 0000000 | 00000 | 5" | 0.368" | 00000000 | 0000 |
7 3/4" | 7/8"-9 | 00000000 | 000000 | 1/2" | 0000000 | 00000 | 5" | 0.368" | 00000000 | 0000 |
8" | 7/8"-9 | 0000000 | 000000 | 1/2" | 0000000 | 00000 | 5" | 0.368" | 00000000 | 0000 |
8 1/4" | 7/8"-9 | 00000000 | 000000 | 1/2" | 00000000 | 00000 | 6" | 1/2" | 0000000 | 00000 |
8 1/2" | 7/8"-9 | 00000000 | 000000 | 1/2" | 00000000 | 00000 | 6" | 1/2" | 0000000 | 00000 |
9 1/4" | 7/8"-9 | 00000000 | 000000 | 1/2" | 00000000 | 00000 | 6" | 1/2" | 0000000 | 00000 |
10" | 7/8"-9 | 00000000 | 000000 | 1/2" | 00000000 | 00000 | 6" | 1/2" | 0000000 | 00000 |
4" Cutting Dp. | ||||||||||
6 1/4" | 7/8"-9 | 00000000 | 000000 | 1/2" | 0000000 | 00000 | 6 3/4" | 0.368" | 0000000 | 00000 |
6 1/2" | 7/8"-9 | 00000000 | 000000 | 1/2" | 0000000 | 00000 | 6 3/4" | 0.368" | 0000000 | 00000 |
6 5/8" | 7/8"-9 | 00000000 | 000000 | 1/2" | 0000000 | 00000 | 6 3/4" | 0.368" | 0000000 | 00000 |
7" | 7/8"-9 | 0000000 | 000000 | 1/2" | 0000000 | 00000 | 6 3/4" | 0.368" | 0000000 | 00000 |
8" | 7/8"-9 | 00000000 | 000000 | 1/2" | 0000000 | 00000 | 6 3/4" | 0.368" | 0000000 | 00000 |
8 1/4" | 7/8"-9 | 00000000 | 000000 | 1/2" | 00000000 | 00000 | 6" | 1/2" | 0000000 | 00000 |
8 3/4" | 7/8"-9 | 00000000 | 000000 | 1/2" | 00000000 | 00000 | 6" | 1/2" | 0000000 | 00000 |
Hole Saws for Hard Metal
The carbide teeth on these steel saws cut hard metal such as steel, stainless steel, cast iron, and titanium. They can be sharpened, so they last longer than saws with carbide-tipped steel teeth. Use them on a drill or drill press. An arbor and pilot drill (sold separately) are required.
Saws | Arbors | Pilot Drills | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
Dia. | For Arbor Thread Size | Each | Shank Size | Each | Pilot Drill Dia. | Pilot Drill Lg. | Each | |||
1" Cutting Dp. | ||||||||||
3/4" | 1/2"-13 | 0000000 | 000000 | 3/8" | 0000000 | 000000 | 1/4" | 2 3/4" | 0000000 | 000000 |
7/8" | 1/2"-13 | 0000000 | 00000 | 3/8" | 0000000 | 00000 | 1/4" | 2 3/4" | 0000000 | 00000 |
1" | 3/4"-10 | 0000000 | 00000 | 1/2" | 0000000 | 00000 | 1/4" | 2 3/4" | 0000000 | 00000 |
1 1/8" | 3/4"-10 | 0000000 | 00000 | 1/2" | 0000000 | 00000 | 1/4" | 2 3/4" | 0000000 | 00000 |
1 1/4" | 3/4"-10 | 0000000 | 00000 | 1/2" | 0000000 | 00000 | 1/4" | 2 3/4" | 0000000 | 00000 |
1 3/8" | 3/4"-10 | 0000000 | 00000 | 1/2" | 0000000 | 00000 | 1/4" | 2 3/4" | 0000000 | 00000 |
1 1/2" | 3/4"-10 | 0000000 | 00000 | 1/2" | 0000000 | 00000 | 1/4" | 2 3/4" | 0000000 | 00000 |
1 5/8" | 3/4"-10 | 0000000 | 00000 | 1/2" | 0000000 | 00000 | 1/4" | 2 3/4" | 0000000 | 00000 |
1 3/4" | 3/4"-10 | 0000000 | 00000 | 1/2" | 0000000 | 00000 | 1/4" | 2 3/4" | 0000000 | 00000 |
1 7/8" | 3/4"-10 | 0000000 | 00000 | 1/2" | 0000000 | 00000 | 1/4" | 2 3/4" | 0000000 | 00000 |
2" | 3/4"-10 | 0000000 | 00000 | 1/2" | 0000000 | 00000 | 3/8" | 2 3/4" | 0000000 | 00000 |
2 1/8" | 3/4"-10 | 0000000 | 00000 | 1/2" | 0000000 | 00000 | 3/8" | 2 3/4" | 0000000 | 00000 |
2 1/4" | 3/4"-10 | 0000000 | 00000 | 1/2" | 0000000 | 00000 | 3/8" | 2 3/4" | 0000000 | 00000 |
2 3/8" | 3/4"-10 | 0000000 | 000000 | 1/2" | 0000000 | 00000 | 3/8" | 2 3/4" | 0000000 | 00000 |
2 1/2" | 3/4"-10 | 0000000 | 000000 | 1/2" | 0000000 | 00000 | 3/8" | 2 3/4" | 0000000 | 00000 |
2 3/4" | 3/4"-10 | 0000000 | 000000 | 1/2" | 0000000 | 00000 | 3/8" | 2 3/4" | 0000000 | 00000 |
3" | 3/4"-10 | 0000000 | 000000 | 1/2" | 0000000 | 00000 | 3/8" | 2 3/4" | 0000000 | 00000 |
3 1/4" | 3/4"-10 | 0000000 | 000000 | 1/2" | 0000000 | 00000 | 3/8" | 2 3/4" | 0000000 | 00000 |
3 1/2" | 3/4"-10 | 0000000 | 000000 | 1/2" | 0000000 | 00000 | 3/8" | 2 3/4" | 0000000 | 00000 |
3 3/4" | 3/4"-10 | 0000000 | 000000 | 1/2" | 0000000 | 00000 | 3/8" | 2 3/4" | 0000000 | 00000 |
4" | 3/4"-10 | 0000000 | 000000 | 1/2" | 0000000 | 00000 | 3/8" | 2 3/4" | 0000000 | 00000 |
2" Cutting Dp. | ||||||||||
3/4" | 1/2"-13 | 0000000 | 00000 | 3/8" | 0000000 | 00000 | 1/4" | 3 3/4" | 0000000 | 00000 |
7/8" | 1/2"-13 | 0000000 | 00000 | 3/8" | 0000000 | 00000 | 1/4" | 3 3/4" | 0000000 | 00000 |
1" | 3/4"-10 | 0000000 | 00000 | 1/2" | 0000000 | 00000 | 1/4" | 3 3/4" | 0000000 | 00000 |
1 1/8" | 3/4"-10 | 0000000 | 00000 | 1/2" | 0000000 | 00000 | 1/4" | 3 3/4" | 0000000 | 00000 |
1 1/4" | 3/4"-10 | 0000000 | 000000 | 1/2" | 0000000 | 00000 | 1/4" | 3 3/4" | 0000000 | 00000 |
1 3/8" | 3/4"-10 | 0000000 | 000000 | 1/2" | 0000000 | 00000 | 1/4" | 3 3/4" | 0000000 | 00000 |
1 1/2" | 3/4"-10 | 0000000 | 000000 | 1/2" | 0000000 | 00000 | 1/4" | 3 3/4" | 0000000 | 00000 |
1 5/8" | 3/4"-10 | 0000000 | 000000 | 1/2" | 0000000 | 00000 | 1/4" | 3 3/4" | 0000000 | 00000 |
1 3/4" | 3/4"-10 | 0000000 | 000000 | 1/2" | 0000000 | 00000 | 1/4" | 3 3/4" | 0000000 | 00000 |
1 7/8" | 3/4"-10 | 0000000 | 000000 | 1/2" | 0000000 | 00000 | 1/4" | 3 3/4" | 0000000 | 00000 |
2" | 3/4"-10 | 0000000 | 000000 | 1/2" | 0000000 | 00000 | 3/8" | 3 3/4" | 0000000 | 00000 |
2 1/8" | 3/4"-10 | 0000000 | 000000 | 1/2" | 0000000 | 00000 | 3/8" | 3 3/4" | 0000000 | 00000 |
2 1/4" | 3/4"-10 | 0000000 | 000000 | 1/2" | 0000000 | 00000 | 3/8" | 3 3/4" | 0000000 | 00000 |
2 3/8" | 3/4"-10 | 0000000 | 000000 | 1/2" | 0000000 | 00000 | 3/8" | 3 3/4" | 0000000 | 00000 |
2 1/2" | 3/4"-10 | 0000000 | 000000 | 1/2" | 0000000 | 00000 | 3/8" | 3 3/4" | 0000000 | 00000 |
2 3/4" | 3/4"-10 | 0000000 | 000000 | 1/2" | 0000000 | 00000 | 3/8" | 3 3/4" | 0000000 | 00000 |
3" | 3/4"-10 | 0000000 | 000000 | 1/2" | 0000000 | 00000 | 3/8" | 3 3/4" | 0000000 | 00000 |
3 1/4" | 3/4"-10 | 0000000 | 000000 | 1/2" | 0000000 | 00000 | 3/8" | 3 3/4" | 0000000 | 00000 |
3 1/2" | 3/4"-10 | 0000000 | 000000 | 1/2" | 0000000 | 00000 | 3/8" | 3 3/4" | 0000000 | 00000 |
4" | 3/4"-10 | 0000000 | 000000 | 1/2" | 0000000 | 00000 | 3/8" | 3 3/4" | 0000000 | 00000 |
Long-Life Hole Saw Kits
The saws in these kits have carbide-tipped teeth, so they last up to twice as long as saws with high-speed steel teeth. Use them on a variety of materials such as wood, plastic, fiberglass, laminates, and metal. Attach hole saws to a drill or drill press with the included arbors.
No. of Saws | Dia. | Cutting Dp. | Includes | Each | |
6 | 7/8", 1 1/8", 1 3/8", 1 3/4", 2", 2 1/2" | 1 15/16" | 3/8" Hex-Shank Arbor with 1/4" Dia. High-Speed Steel Pilot Drill, 7/16" Hex-Shank Arbor with 1/4" Dia. High-Speed Steel Pilot Drill, Plastic Case | 0000000 | 000000 |
9 | 3/4", 7/8", 1 1/8", 1 3/8", 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2" | 1 15/16" | 3/8" Hex-Shank Arbor with 1/4" Dia. High-Speed Steel Pilot Drill, 7/16" Hex-Shank Arbor with 1/4" Dia. High-Speed Steel Pilot Drill, Plastic Case | 0000000 | 000000 |