For Use On For Use On | Show |
|---|
|
For Use On For Use On | Hide |
|---|
System of Measurement System of Measurement |
|---|
|
For Use With For Use With |
|---|
|
Abrasive Material Abrasive Material |
|---|
|
Maximum Speed Maximum Speed |
|---|
|
Wheel Type Wheel Type |
|---|
 | Type 1 |
Wheel Shape Wheel Shape |
|---|
|
Arbor Hole Arbor Hole |
|---|
|
Body Material Body Material |
|---|
|
Wet-Cutting Blades for Walk-Behind Flat Saws
Use these blades with water or coolant (not included) to produce a smooth cut and minimize heat buildup. Blades with multiple arbor diameters come with a reducer bushing. Choose a narrower width of cut for faster cuts and less material loss.
Material | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Diamond Depth | For Use On | Includes | Each | |
12" Dia. | ||||||||||
| 20 mm, 1" | Round | 0.125" | 5,095 | Diamond | Steel | 1/4" | Concrete | Reducer Bushing | 000000 | 0000000 |
14" Dia. | ||||||||||
| 20 mm, 1" | Round | 0.11" | 4,365 | Diamond | Steel | 1/4" | Concrete | Reducer Bushing | 0000000 | 000000 |
| 20 mm, 1" | Round | 0.125" | 4,365 | Diamond | Steel | 1/4" | Concrete | Reducer Bushing | 0000000 | 000000 |
| 20 mm, 1" | Round | 0.14" | 4,365 | Diamond | Steel | 1/4" | Concrete | Reducer Bushing | 0000000 | 000000 |
16" Dia. | ||||||||||
| 20 mm, 1" | Round | 0.125" | 3,820 | Diamond | Steel | 1/4" | Concrete | Reducer Bushing | 0000000 | 000000 |
18" Dia. | ||||||||||
| 1" | Round | 0.125" | 3,395 | Diamond | Steel | 1/4" | Concrete | __ | 0000000 | 000000 |
| 1" | Round | 0.14" | 3,395 | Diamond | Steel | 1/4" | Concrete | __ | 0000000 | 000000 |
20" Dia. | ||||||||||
| 1" | Round | 0.14" | 3,055 | Diamond | Steel | 1/4" | Concrete | __ | 000000 | 000000 |
Long-Life Dry-Cutting Blades for Walk-Behind Flat Saws
These blades have a higher concentration of diamonds than other dry-cutting blades, so they last up to three times longer. Use them with low horsepower (under 20 hp) walk-behind flat saws. Blades with multiple arbor diameters come with a reducer bushing. Choose a narrower width of cut for faster cuts and less material loss.
Material | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Diamond Depth | Cutting Application | For Use On | Includes | Each | |
12" Dia. | |||||||||||
| 20 mm, 1" | Round | 0.125" | 6,300 | Diamond | Steel | 1/4" | Dry | Concrete | Reducer Bushing | 0000000 | 0000000 |
14" Dia. | |||||||||||
| 20 mm, 1" | Round | 0.11" | 5,400 | Diamond | Steel | 1/4" | Dry | Concrete | Reducer Bushing | 0000000 | 000000 |
| 20 mm, 1" | Round | 0.125" | 5,400 | Diamond | Steel | 1/4" | Dry | Concrete | Reducer Bushing | 0000000 | 000000 |
| 20 mm, 1" | Round | 0.14" | 5,400 | Diamond | Steel | 1/4" | Dry | Concrete | Reducer Bushing | 0000000 | 000000 |
16" Dia. | |||||||||||
| 20 mm, 1" | Round | 0.125" | 4,800 | Diamond | Steel | 1/4" | Dry | Concrete | Reducer Bushing | 0000000 | 000000 |
18" Dia. | |||||||||||
| 1" | Round | 0.125" | 3,395 | Diamond | Steel | 1/4" | Dry | Concrete | __ | 0000000 | 000000 |
| 1" | Round | 0.14" | 3,395 | Diamond | Steel | 1/4" | Dry | Concrete | __ | 0000000 | 000000 |
20" Dia. | |||||||||||
| 1" | Round | 0.14" | 3,055 | Diamond | Steel | 1/4" | Dry | Concrete | __ | 0000000 | 000000 |
Dry-Cutting Blades for Walk-Behind Flat Saws
Use these blades with low horsepower (under 20 hp) walk-behind flat saws. Blades come with a reducer bushing to adjust the arbor diameter. Choose a narrower width of cut for faster cuts and less material loss.
Material | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Arbor Hole Size | Arbor Hole Shape | Width of Cut | Abrasive | Body | Max. Speed, rpm | Diamond Depth | For Use On | Includes | Each | |
12" Dia. | ||||||||||
| 20 mm, 1" | Round | 0.125" | Diamond | Steel | 6,300 | 0.35" | Concrete | Reducer Bushing | 0000000 | 000000 |
14" Dia. | ||||||||||
| 20 mm, 1" | Round | 0.11" | Diamond | Steel | 5,400 | 0.35" | Concrete | Reducer Bushing | 0000000 | 00000 |
| 20 mm, 1" | Round | 0.125" | Diamond | Steel | 5,400 | 0.35" | Concrete | Reducer Bushing | 0000000 | 000000 |
16" Dia. | ||||||||||
| 20 mm, 1" | Round | 0.125" | Diamond | Steel | 4,800 | 0.35" | Concrete | Reducer Bushing | 0000000 | 000000 |
18" Dia. | ||||||||||
| 20 mm, 1" | Round | 0.142" | Diamond | Steel | 3,300 | 0.35" | Concrete | Reducer Bushing | 0000000 | 000000 |
20" Dia. | ||||||||||
| 20 mm, 1" | Round | 0.142" | Diamond | Steel | 3,000 | 0.35" | Concrete | Reducer Bushing | 0000000 | 000000 |
Portable Circular Saw Cutoff
Wheels for Masonry and Concrete
Make cuts in hard, brittle materials such as firebrick, stone, and concrete. These silicon carbide wheels are reinforced with a layer fiberglass mesh. For wheels with a round/diamond arbor, detach the center piece to expose the diamond shape.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
Wheel | Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Arbor Hole Shape | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | Grit | Each | |
6 1/2" Dia. | ||||||||||
| 1/8" | 5/8" | Round/Diamond | 9,405 | Type 1 | Straight | Silicon Carbide | Fiberglass Mesh | 24 | 0000000 | 00000 |
7" Dia. | ||||||||||
| 1/8" | 5/8" | Round/Diamond | 8,600 | Type 1 | Straight | Silicon Carbide | Fiberglass Mesh | 24 | 000000 | 0000 |
8" Dia. | ||||||||||
| 1/8" | 5/8" | Round/Diamond | 7,500 | Type 1 | Straight | Silicon Carbide | Fiberglass Mesh | 24 | 000000 | 0000 |
Portable Cutoff Saw Wheels for Masonry and Concrete
Make cuts in hard, brittle materials such as firebrick, stone, and concrete. These wheels are silicon carbide that is reinforced with a layer of fiberglass mesh.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
Wheel | Material | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | Grit | Each | |
12" Dia. | |||||||||
| 1/8" | 1" | 6,300 | Type 1 | Straight | Silicon Carbide | Fiberglass Mesh | 30 | 0000000 | 00000 |
| 1/8" | 20 mm | 6,300 | Type 1 | Straight | Silicon Carbide | Fiberglass Mesh | 30 | 0000000 | 0000 |
14" Dia. | |||||||||
| 1/8" | 1" | 5,400 | Type 1 | Straight | Silicon Carbide | Fiberglass Mesh | 30 | 0000000 | 00000 |
| 1/8" | 20 mm | 5,460 | Type 1 | Straight | Silicon Carbide | Fiberglass Mesh | 30 | 0000000 | 00000 |
16" Dia. | |||||||||
| 1/8" | 1" | 4,700 | Type 1 | Straight | Silicon Carbide | Fiberglass Mesh | 36 | 0000000 | 00000 |
Angle Grinder Cutoff Wheels for Masonry and Concrete
Make cuts in hard, brittle materials such as firebrick, stone, and concrete. Wheels are made of silicon carbide abrasive that is reinforced with a layer of fiberglass mesh.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
Wheel | Material | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | Grit | Each | |
4" Dia. | |||||||||
| 1/16" | 5/8" | 15,280 | Type 1 | Straight | Silicon Carbide | Fiberglass Mesh | 30 | 0000000 | 00000 |
4 1/2" Dia. | |||||||||
| 1/16" | 7/8" | 13,580 | Type 1 | Straight | Silicon Carbide | Fiberglass Mesh | 30 | 0000000 | 0000 |
5" Dia. | |||||||||
| 1/16" | 7/8" | 12,225 | Type 1 | Straight | Silicon Carbide | Fiberglass Mesh | 30 | 0000000 | 0000 |
RotoZip Spiral Saw Cutoff Wheels
for Masonry and Concrete
Make cuts in hard, brittle materials such as firebrick, stone, and concrete. These wheels have a layer of fiberglass mesh reinforcement.
Wheel | Material | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | Grit | Each | |
3 1/2" Dia. | |||||||||
| 0.09" | 11.1 mm | 20,000 | Type 1 | Straight | Silicon Carbide | Fiberglass Mesh | 30 | 0000000 | 00000 |