We will reply to your message within an hour.
Diamond grit bonded to a segmented edge cuts through hard metal such as cast iron.
Blades and teeth are steel and treated to a Rockwell Hardness between C63 and C65 for increased wear resistance when cutting through steel and cast iron bars, rods, pipe, and tubing.
Two layers of fiberglass mesh reinforcement give these fast-cutting, zirconia alumina wheels at least three times the life of standard cutoff wheels when aluminum, iron, stainless steel, and steel.
These wheels have a zirconia alumina abrasive for cutting ductile cast iron.
These non-reinforced aluminum oxide wheels create the nearly polished finish required for testing metal.
These wheels are thinner than standard bench-top cutoff saw wheels, so they cut through aluminum, iron, stainless steel, and steel more quickly.
These wheels are reinforced with fiberglass mesh and designed to last longer than standard wheels when cutting ductile cast iron.
Designed to cut sheet metal.
Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel.
Use these wheels to cut through metal such as iron and steel. They are reinforced with a layer of fiberglass mesh.
These wheels have a blend of aluminum oxide and silicon carbide abrasives for cutting ductile cast iron.
Use these wheels to cut through metal such as iron, stainless steel, and steel.
These high-density ceramic or ceramic oxide wheels have two layers of fiberglass mesh reinforcement and last up to twice as long as long-life cutoff wheels when cutting iron, stainless steel, and steel.
Run these high-density aluminum oxide wheels at higher speeds than standard cutoff wheels to make quick cuts in aluminum, iron, stainless steel, and steel.
Premium-grade abrasive materials and two layers of fiberglass mesh reinforcement give these wheels a longer life than standard cutoff wheels when cutting metal such as iron, stainless steel, and steel.
An extra-fine layer of fiberglass mesh reinforcement allows these wheels to make smoother cuts than standard bench-grinder cutoff wheels when cutting metal such as aluminum, iron, stainless steel, and steel.
Also known as Type 27, raised-hub, and depressed-center cutoff wheels, these wheels outperform Type 1 wheels when making flush cuts in metal.
Switch between cutting and deburring aluminum, iron, stainless steel, and steel without the need to change your wheel.
Made of premium grade abrasives, these wheels are strong and thick for making notches in aluminum, iron, stainless steel, and steel.
Ideal when working across multiple materials, these wheels are specially constructed to cut plastic, fiberglass, concrete, and ceramic, as well as metal.
Make cuts in most metal, including aluminum, iron, stainless steel, and steel.
The carbide teeth on these saws last up to twice as long as high-speed steel teeth.
Quickly connect these saws to your drill or drill press with the built-in arbor.
These saws have high-speed steel teeth.
The carbide-tipped teeth on these saws last up to twice as long as high-speed steel teeth.
The carbide teeth on these steel saws cut hard metal such as steel, stainless steel, cast iron, and titanium.
The saws in these kits have carbide-tipped teeth, so they last up to twice as long as saws with high-speed steel teeth.
These general purpose saws are good for cutoff, slitting, and slotting applications in a wide range of materials, including aluminum, iron, and steel.
Made of solid carbide, these saws are harder, stronger, and more wear resistant than high-speed steel for the longest life and best finish on hard material. Use them for cutoff, slitting, and slotting applications.
Also known as jeweler's slotting saws and metal slitting saws, these saws are good for use on wire, tubing, extrusions, and other very thin material that requires delicate cuts.
With peripheral and side teeth, these saws remove chips for a consistent cutting width.