We will reply to your message within an hour.
Cut stainless steel sheets, pipe, tubing, and grating with teeth made of impact-resistant carbide.
Make fast, clean cuts in steel sheets, angle iron, rebar, and pipe with the carbide teeth on these blades.
Use these titanium carbonitride (TiCN) coated blades on stainless steel.
Teeth vary in size, number per inch, and pattern to reduce vibration, so they create a smoother finish than Long-Life Band Saw Blades. They're also known as variable-set blades.
Tooth size and number per inch are constant throughout the blade
Make clog-free cuts in thick cross sections of steel, aluminum, brass, bronze, wood, and plastic. These blades have forward-angled teeth and plenty of space for chips to collect.
Tooth size and number per inch are constant throughout the blade.
Teeth vary in size, number per inch, and pattern to reduce vibration, so they create a smoother finish than Long-Life Band Saw Blades for Thin Metal. They're also known as variable-set blades.
Cut structural shapes such as I-beams and angle iron as well as bundles of structural shapes and tubing with less tooth breakage than other blades. The teeth are reinforced, forward-angled, and widely spaced to leave room for chips to collect.
Titanium aluminum nitride (TiAlN) coated, precision-ground teeth cut quickly and leave a smooth edge on stainless steel, nickel, and titanium.
Also known as variable-set blades, these have teeth that vary in size, number per inch, and pattern to reduce vibration so they create a smoother cut than Portable Band Saw Blades.
Tooth size and number per inch are constant throughout these blades.
The teeth on these blades vary in size, number per inch, and pattern to reduce vibration, so they create a smoother cut than Portable Band Saw Blades for Thin Metal. They're also known as variable-set blades.
Create a smoother cut than Long-Life Band Saw Blade Coil Stock—these blades have teeth that vary in size, number per inch, and pattern to reduce vibration. They're also known as variable-set blades.
These blades have teeth with a constant size and number per inch throughout the blade.
Teeth vary in size, number per inch, and pattern to reduce vibration, so they create a smoother cut than Long-Life Band Saw Blade Coil Stock for Thin Metal. They're also known as variable-set blades.
Two layers of fiberglass mesh reinforcement give these fast-cutting, zirconia alumina wheels at least three times the life of standard cutoff wheels when aluminum, iron, stainless steel, and steel.
These non-reinforced aluminum oxide wheels create the nearly polished finish required for testing metal.
These wheels are thinner than standard bench-top cutoff saw wheels, so they cut through aluminum, iron, stainless steel, and steel more quickly.
Make fast, burr-free cuts in stainless steel with these premium aluminum oxide wheels.
Designed to cut sheet metal.
Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel.
These wheels are designed to cut stainless steel. They are reinforced with a layer fiberglass mesh.
Use these wheels to cut through metal such as iron, stainless steel, and steel.
These high-density ceramic or ceramic oxide wheels have two layers of fiberglass mesh reinforcement and last up to twice as long as long-life cutoff wheels when cutting iron, stainless steel, and steel.
Run these high-density aluminum oxide wheels at higher speeds than standard cutoff wheels to make quick cuts in aluminum, iron, stainless steel, and steel.
Premium-grade abrasive materials and two layers of fiberglass mesh reinforcement give these wheels a longer life than standard cutoff wheels when cutting metal such as iron, stainless steel, and steel.
Also known as Type 27, raised-hub, and depressed-center cutoff wheels, these wheels outperform Type 1 wheels when making flush cuts in metal.
For quick cuts in stainless steel, run these high-density zirconia alumina wheels at a higher rpm than standard cutoff wheels.
With less than 0.1% iron, chloride, and sulfur contaminants, these wheels prevent corrosion and discoloration on stainless steel.
An extra-fine layer of fiberglass mesh reinforcement allows these wheels to make smoother cuts than standard bench-grinder cutoff wheels when cutting metal such as aluminum, iron, stainless steel, and steel.
Often used on duct, these ultra-thin wheels make fast, clean cuts in thin metal that minimize burrs and discoloration from heat.
With an X-shaped arbor hole, these wheels quickly and safely click into X-lock grinders without wrenches or flange nuts.
Switch between cutting and deburring aluminum, iron, stainless steel, and steel without the need to change your wheel.
Made of premium grade abrasives, these wheels are strong and thick for making notches in aluminum, iron, stainless steel, and steel.
Ideal when working across multiple materials, these wheels are specially constructed to cut plastic, fiberglass, concrete, and ceramic, as well as metal.
Also known as Type 27, raised-hub, and depressed-center cutoff wheels, these wheels outperform Type 1 wheels when making flush cuts.
Made of premium grade abrasives, these wheels make fast, burr-free cuts in stainless steel.
Made of premium grade abrasives, these wheels are strong and thick for making notches in stainless steel.
Prevent corrosion and discoloration on stainless steel—these wheels contain less than 0.1% iron, chloride, and sulfur contaminants.
Make cuts in most metal, including aluminum, iron, stainless steel, and steel.
A ceramic alumina abrasive cuts through stainless steel.
These standard saws have high-speed steel teeth.
The carbide teeth on these saws last up to twice as long as high-speed steel teeth.
Specially designed teeth cut faster than the teeth on standard hole saws.
Quickly connect these saws to your drill or drill press with the built-in arbor.
These saws have high-speed steel teeth.
The carbide-tipped teeth on these saws last up to twice as long as high-speed steel teeth.
The carbide teeth on these steel saws cut hard metal such as steel, stainless steel, cast iron, and titanium.
An extra-thick steel body with carbide teeth can cut through stainless steel structural framing and electrical enclosures.
These kits have saws with high-speed steel teeth and a steel body.
The saws in these kits have carbide-tipped teeth, so they last up to twice as long as saws with high-speed steel teeth.
These general purpose saws are good for cutoff, slitting, and slotting applications in a wide range of materials, including aluminum, iron, and steel.
Made of solid carbide, these saws are harder, stronger, and more wear resistant than high-speed steel for the longest life and best finish on hard material. Use them for cutoff, slitting, and slotting applications.
Also known as jeweler's slotting saws and metal slitting saws, these saws are good for use on wire, tubing, extrusions, and other very thin material that requires delicate cuts.
With peripheral and side teeth, these saws remove chips for a consistent cutting width.
Swap accessories quickly and safely without tools.